18 products found for "y0704"

rc-car-online - Home

y0904 nitrided hardened Steel pinion with 20 to 42 teeth width

Nitrided hardened, highly wear-resistant.Not suitable for Smartech and Carson models. Suitable for FG offroad models 2WD on the clutch bell to the 42 main gear. This pinion is profile shifted and has a 1.5 module. This means that the number of teeth of the gear is changed compared to the previously known values while the diameter remains the same. The area of the involute curve that determines the tooth profile is shifted. Positively shifted gears (fewer teeth than normal) are more stable and run more smoothly; the slightly lower strength of negatively shifted gears is irrelevant. 1 piece

€29.90*

y0704 Smartech Monster Truck body shell, painted, 1 pce.

Painted body shell with decals.Die Karosserie passt auch auf Carson Comanche, Carson Stadium Racer, Stadium Truck, Bigfoot Race und Pickup Truck. Bei individueller Anpassung natürlich an nahezu allen 1:6er und auch vielen 1:8er RC-Cars!Measures:Wheelbase: 400 mmWith between the wheels: approx. 255 mmWith in the middle: approx. 235 mmWidth: ca. 250 mmTotal length: ca. 630 mmHeight: ca. 180 mm

€49.90*

y0794 SPEED TEC EXPERT Zenoah G290 tuning engine

The SPEED TEC EXPERT genuine Zenoah G290 engine is optimized for performance with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC EXPERT version modifications: Cylinder: Adjustment of compression; enlarged ports, fuel management milled, machined and polished exhaust and intake. Piston: weight reduced; skirt shortened; oil rings, piston above and below piston ring tapered and piston dome ground. Crankshaft: is adjusted and aligned. Flywheel: weight reduced and checked for runout. Gaskets: use of premium quality gaskets.To achieve the optimum performance gain of a SPEED TEC EXPERT engine, we recommend the use of a tuned pipe ( to the tuned pipes ).

€649.00*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y0700 Double sided alloy servoarm, 1 pce.

Item N° y0700 Double sided alloy servoarm, 1 pce.Suitable for all servos with an output shaft with 25 teeth multi-tooth shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!When you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.

€14.90*

y0703 - 1:6 Spoiler, white, 1 pce.

Item-No.: y07031:6 Spoiler, white, 1 pce.Thickness: approximately 3 mmSuitable for most 1/6 FG, Carson, etc. models.

€14.90*

y0701 Double sided split alloy servoarm, 1 pce.

Splitted Alloy servoarm for a more protecting screw connection (with a 2,0 mm allen head screw driver) causing stiffness on the servo output shaftSuitable for all servos with an output shaft with 25 tooth spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!holes for linkage with 3 mm diameterWhen you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.

€19.90*

y0740 Replacement silicone exhaust hose for Losi 5ive-T Jetpro

Genuine HT spare/option part. Spare part for the Jetpro Losi 5ive-T tuned pipe.Measures:Inside diameter: 28 mm Outside diameter: 37 mmWall thickness: 4 mmLength : 46 mmContents:1 piece

€7.90*

y0702 Copper-Exhaust gasket for Zenoah, CY, Fuelie, PT, etc.

Genuine HT spare/option part. For all Zenoah G230/240/260/270/290/320 / CY / Fuelie / PTTemperature and dimensionally stable. Thickness: 1,0 mm.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:1 piece

€4.90*

Bearing plate for brake cam Baja premium brake, 2 pcs., y0004

€7.10*

y0714 Alloy pinion 19 tooth, hard anodized, for Carson/Smartech 1/6 scale offroad - 1pce.

Item N° y0714 Alloy pinion 19 tooth, hard anodized, for Carson/Smartech 1/6 scale offroad - 1pce.Very low weight hard anodized 19T alloy pinion, for use with the stock 48T spur gear on 1/6 scale 2WD off-road cars from Carson/Smartech/Nutech a.s.o.Diameter 31,6 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5

€27.90*

10704 FG Reducing bush E

Genuine FG spare/option part. Dimension:Length: 13 mmDiameter: 13 mmInside diameter: 10,2 mmContents:1 piece

€5.90*

y0204 HT-Steel pinion extreme duty

zahn_0002 Size: y0204 - 12 Teeth

Genuine HT spare/option part.Coarse pitch pinion for the layshaft, especially for use in off-road and monster models. The teeth are stronger and , due to their bigger size, a little bit more forgiving when the gear mesh is not adjusted correctly.Fits FG cars and Carson Attack/Firehammer/Smartech Traveller, Carson Comanche, Touareg a.s.o.Fits FG and Smartech / Carson cars. Only for use with the extreme duty differential ring gear! Module: m=1,75.Contents:1 piece [INCLUDE]profilverschoben[ENDINCLUDE]

€28.90*

y0744 Differential Silicone oil / grease, viscosity 15.000 untill 2.000.000, 50 ml

y0744 Viscosity: y0744/04 - 100.000+ 2.9EUR

For changing the locking effect of large scale car differentials.Top quality in 50 ml plastic wide-neck bottles.Silicone oil / grease with a viscosity to choose:15.00030.00050.000100.000300.0001.000.0002.000.000Viscosity of silicone oil at various temperatures.

Content: 50 Milliliter (€316.00* / 1000 Milliliter)

Variants from €12.90*

€15.80* €17.80* (11.24% saved)

y0700/01 Single-sided alloy servoarm, 1 pce.

Item N° y0700/01 Single-sided alloy servoarm, 1 pce.Suitable for all servos with an output shaft with 25 teeth multi-tooth shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!When you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.

€13.90*

y0701/01 Single-sided split alloy servoarm

Splitted Alloy servoarm for a more protecting screw connection (with a 2,0 mm allen head screw driver) causing stiffness on the servo output shaft!Suitable for all servos with an output shaft with 25 tooth spline shaft, for example:y2006 Digital Big-Scale Servo D-21HV Nearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!holes for linkage with 3 mm diameterWhen you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.Content:1 piece

€18.90*

y0707/01 - Grafil 5B-G front section, 1 pce.

Item-No.: y0707/01Grafil 5B-G front section, 1 pce.

€6.90*

y0703/01 Original Smartech Uno 1/6 scale rear wing, white

Original spare part for Smartech Uno.1:6 rear wing in white with original Smartech Uno decor.Thickness: approximately 3 mm.Suitable for most 1/6 FG, Smartech, Carson, etc. models.

€14.90*

y0707/02 - Grafil 5B-G window masking stickers, 1 pce.

Item-No.: y0707/02Grafil 5B-G window masking stickers, 1 pce.

€3.90*

18 products found for "y0704"

Filter products

rc-car-online - Home