TT1020 Top Tuning Adapter wheel nut for MadMax, HPI and Losi 5ive rims on Traxxas X-MAXX

€19.90*

Prices incl. VAT plus shipping costs

Available

TT1020 Version

TT1020/01 for MadMax and HPI rims

TT1020/02 for Losi rims

Product number: tt_tt1020.1

EAN: 4058575090427

Product information "TT1020 Top Tuning Adapter wheel nut for MadMax, HPI and Losi 5ive rims on Traxxas X-MAXX"

Genuine TopTuning spare/option part.

These adapter nuts, manufactured from billet 7075 aluminum allow for easy and precise installation of all MadMax, HPI and Losi 5ive tires and rims on the Traxxas X-Maxx. For the best result possible, nut and adapter are manufactured as a one-piece unit.

It should be noted that the wide rims can be used on the rear axle only. On the front axle they would limit the steering angle by grinding on lower a-arm and steering rod.
LosiDBXL rims do not fit the X-Maxx (depth of hex is too deep)!

Traxxas has microencapsulated the wheel shafts of the X-Maxx to secure the wheel nuts. Like any thread locking compound this is not for eternity. After several tire changes the use of a normal screw locking compound is advised, we recommend it "y0113 / 01 medium strength".

The dimensions of the nut are specifically designed for use with MadMax, current HPI and Losi rims. Rims from Losi 5ive have slightly different dimensions in the hub area. This is meaningless on the large LOSI or HPI wheel adapters. With the smaller and shorter wheel nut thread of the X-Maxx wheel shafts you cannot compromise. Therefore there are also special nuts for the Losi rims/wheels available at our options menu.
However, somewhere in the past, the injection moulds for the HPI rims were slightly modified in the hub area. As part of that job the bore diameter has probably been slightly increased. Therefore, the use of older rims in combination with the adapter nuts makes it necessary to increase the rim bore a little bit.

Due to repeated requests for use: these wheel nuts replace the stock wheel nuts when installing the wheels!

Contents:

4 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

y0113 Thread locking compound

Genuine HT spare/option part.Available as 272 high strength and heat resistant, 270/1 high strength or 241 medium strength.The strength of 272 and 270/1 is comparable, but 272 can handle temperatures up to 230°C vs. 150°C for 270/1. It is therefore the perfect choice for applications like exhaust or clutch pinion bolts. However, curing of 272 takes at least twice as long as 270/1.An excellent recommendation for removal of screws treated with threadlocking compound:CFH Diamant M50 Gasbrenner, y1007 Contents:1 piece / 10 gram

Content: 20 Gramm (€395.00* / 1000 Gramm)

€7.90*

Details

y1486 Threading die M12 x 1,25

Genuine HT spare/option part. Die for removing the remains of microencapsulation on the stock Traxxas X-Maxx wheel shafts.After a few tire changes microencapsulation becomes very hard. This will cause the risk of thread seizure and damage. Timely removal of the residues prevents this. A die holder is not required. Turning the die with bare hands will do the job easily.Contents:1 piece

€12.90*

Customers also bought

TT1020 Top Tuning Adapter wheel nut for MadMax, HPI and Losi 5ive rims on Traxxas X-MAXX

Genuine TopTuning spare/option part.These adapter nuts, manufactured from billet 7075 aluminum allow for easy and precise installation of all MadMax, HPI and Losi 5ive tires and rims on the Traxxas X-Maxx. For the best result possible, nut and adapter are manufactured as a one-piece unit.It should be noted that the wide rims can be used on the rear axle only. On the front axle they would limit the steering angle by grinding on lower a-arm and steering rod.LosiDBXL rims do not fit the X-Maxx (depth of hex is too deep)!Traxxas has microencapsulated the wheel shafts of the X-Maxx to secure the wheel nuts. Like any thread locking compound this is not for eternity. After several tire changes the use of a normal screw locking compound is advised, we recommend it "y0113 / 01 medium strength".The dimensions of the nut are specifically designed for use with MadMax, current HPI and Losi rims. Rims from Losi 5ive have slightly different dimensions in the hub area. This is meaningless on the large LOSI or HPI wheel adapters. With the smaller and shorter wheel nut thread of the X-Maxx wheel shafts you cannot compromise. Therefore there are also special nuts for the Losi rims/wheels available at our options menu.However, somewhere in the past, the injection moulds for the HPI rims were slightly modified in the hub area. As part of that job the bore diameter has probably been slightly increased. Therefore, the use of older rims in combination with the adapter nuts makes it necessary to increase the rim bore a little bit.Due to repeated requests for use: these wheel nuts replace the stock wheel nuts when installing the wheels!Contents:4 pieces

€19.90*

Details

108718 HPI ESC / side brace mount Baja 5B Flux

Genuine HPI spare/option part. Content:1 set

€14.28*

85432 HPI Spur Gear 57 teeth

Genuine HPI spare/option part. Content:1 piece

€14.28*

Customers also viewed

TT1020 Top Tuning Adapter wheel nut for MadMax, HPI and Losi 5ive rims on Traxxas X-MAXX

Genuine TopTuning spare/option part.These adapter nuts, manufactured from billet 7075 aluminum allow for easy and precise installation of all MadMax, HPI and Losi 5ive tires and rims on the Traxxas X-Maxx. For the best result possible, nut and adapter are manufactured as a one-piece unit.It should be noted that the wide rims can be used on the rear axle only. On the front axle they would limit the steering angle by grinding on lower a-arm and steering rod.LosiDBXL rims do not fit the X-Maxx (depth of hex is too deep)!Traxxas has microencapsulated the wheel shafts of the X-Maxx to secure the wheel nuts. Like any thread locking compound this is not for eternity. After several tire changes the use of a normal screw locking compound is advised, we recommend it "y0113 / 01 medium strength".The dimensions of the nut are specifically designed for use with MadMax, current HPI and Losi rims. Rims from Losi 5ive have slightly different dimensions in the hub area. This is meaningless on the large LOSI or HPI wheel adapters. With the smaller and shorter wheel nut thread of the X-Maxx wheel shafts you cannot compromise. Therefore there are also special nuts for the Losi rims/wheels available at our options menu.However, somewhere in the past, the injection moulds for the HPI rims were slightly modified in the hub area. As part of that job the bore diameter has probably been slightly increased. Therefore, the use of older rims in combination with the adapter nuts makes it necessary to increase the rim bore a little bit.Due to repeated requests for use: these wheel nuts replace the stock wheel nuts when installing the wheels!Contents:4 pieces

€19.90*

Details

6115 FG Wheel nuts M8 with clamping

Genuine FG spare/option part. Part is delivered in silver or black color from vendor!Contents:10 pieces

€7.50*

5476/01 Mielke HR Wheel nuts M8

Mielke wheel nuts for 8 mm axles!

€29.00*

TT1003 Top Tuning rear 7075 aluminum chassis brace for TLR/Losi 5ive-B

Genuine TopTuning spare/option part.Rear chassis brace by TopTuning, made of high-strength 7075 aluminum; fits the new racing Buggy TLR/Losi 5ive-B only.The shape of the TLR 5ive-B rear brace with its much steeper angle compared to the 5ive-T and Mini makes the use of aluminum for this application particularly interesting. The standard plastic part cannot provide the desired dimensional stability in the long run. The material strength and temperature resistance of aluminum offer a significant advantage.Inclusive two mounting screw M5 x 14 mm.Contents:1 piece

€24.90*

LOS252091 Losi Front Center Dogbone, 5ive-T 2.0

Genuine Losi spare/option part. Contents:1 piece Hint: For the connection from the center diff to the front axle, the 5ive-T 2.0 can also be upgraded to the CVD system of the predecessor 5ive-T with genuine parts.To do this you only have to install the longer version CVD-shaft LOSB3216 instead of the former short one along with the drive shaft coupler and boot LOSB3220 at the front gearbox.

€29.99*

LOS45024 Losi Wheel & Beadlock Set, flo yellow, 5ive-T 2.0

Genuine Losi spare/option part. Contents:2 pieces

€49.99*

AREA-MCD-003 Aluminum clutch bell holder for MCD RR5/XS5

CNC-machined from 6061-T6 aluminum clutch bell holder by Area RC for MCD RR5/XS5. Open design for maximum clutch cooling and reduced weight. Comes with aluminum mesh plate included.

€47.45* €94.90* (50% saved)