240 products found for "tt1530_offer_465"
rc-car-online - Home
%
Regular price: [ITEMPRICE]SELF[ENDITEMPRICE] EUROffer of the month price: [ITEMDISCOUNTPRICE]SELF[ENDITEMDISCOUNTPRICE] EURTypical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateCan be charged with 5C when time is criticalRecommended charge with 2CConnectors: EC5, XH-balancer.Spezification:Tension: 4S / 14,8VCapacity mAh: 6500Case: HartCable cross section: 12AWG/3,3Length +/- 5 mm: 137 mmWidth +/- 1,5 mm: 46 mmHeight: +/- 1,5 mm: 48 mmWeight +/- 10g: 548gCont. current: 80C (220A)Contents:1 piece
%
Regular price: [ITEMPRICE]SELF[ENDITEMPRICE] EUROffer of the month price: [ITEMDISCOUNTPRICE]SELF[ENDITEMDISCOUNTPRICE] EURTypical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateCan be charged with 5C when time is criticalRecommended charge with 2CConnectors: EC5, XH-balancer. Spezification:Tension: 4S / 14,8VCapacity mAh: 5000Case: HartCable cross section: 12AWG/3,3Length +/- 5 mm: 137 mmWidth +/- 1,5 mm: 46 mmHeight: +/- 1,5 mm: 48 mmWeight +/- 10g: 548gCont. current: 60C (220A)Contents:1 piece
This battery is primarily intended as a power source for electric on-board starter units.Typical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateRecommended charge with 1CDimensions: Length +/- 5 mm: 110 mmWidth +/- 1,5 mm: 49 mmHeight: +/- 1,5 mm: 34 mmWeight +/- 10g: 371gConnectors: T-Connector, XH-balancer. Battery color may vary!Contents:1 piece
Typical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateCan be charged with 3C when time is criticalRecommended charge with 2 3CConnectors: EC5, XH-balancer.Dimensions: Length +/- 5 mm: 138,5 mmWidth +/- 1,5 mm: 47 mmHeight: +/- 1,5 mm: 36,5 mmWeight +/- 10g: 363gContents:1 piece
Absolute premium quality receiver battery from Top Tuning!Typical properties Voltage: 7.6V Capacity: 5500mAh Watt hours: 37.0Wh Cell Configuration: 2S1P Battery type: LiPo HV Maximum continuous discharge rate: 100C Maximum charge rate: 2C Maximum charge current: 11.0A Hard Case: Yes. Connector type: T-Plug Cable cross section: 12 AWG Balancer connection: JST_XH Dimensions: length: 96 mm Width: 47 mm Height: 25 mm Weight without cable: 212g Weight with cable: 229g Contents:1 piece
Genuine HT spare/option part.RC - Paint is a special paint for lacquering RC-Car Lexan (Polycarbonate) body shells. The ultra-fine mist provides optimal coverage! Through an optimized atomizer valve an outstanding painting result is guaranteed. The content of the can is 150ml and suffices - depending on the intensity of the painting, - for one 1/8 or two 1/10 body shells. Two to three cans are needed for a 1/5 or 1/6 body shell.RC-Paint Lexan color is produced in a particularly environmentally friendly. The composition of colors (color pigments) was placed on the lowest possible heavy metal content and the best possible environmental compatibility of the solvent and propellent gas value.Contents:1 piece / 150 mlPainting tips:
Content: 150 Milliliter (€93.00* / 1000 Milliliter)
%
SUPER GRIP 170 x 80 mm and 170 x 60 mm with black MadMax Extreme rims for 24 mm hex wheel drive, 20 beadlock screws per rim and reinforced orangen beadlock rings. Fits Losi 5ive-T, 5ive Mini, Desert Buggy XL and all HPI Baja 5B and 5T/SC cars.Due to the extreme stress created by the MadMax SUPER GRIP tires, the rim has been optimized again.The tires come with a special rigid insert which transfers the applied forces without tilting; even with the heaviest cars like the Losi 5ive-T.All together, the SUPER GRIP lives up to its name and provides maximum grip, which makes it necessary to use the supplied 3 mm beadlock screws for the MadMax EXTREME rims instead of the usual 2.5 mm screws. Additionally, the seating of these screws should be checked after each use.The MadMax SUPERGRIP tires have been designed especially for use on tarmac. Even on fine-pored tarmac your car will still find enough grip! (As you can see in our video.) On most 1/5 and 1/6 cars the best combination is the use of 60 mm wide front and 80 mm wide rear tires. The Losi 5ive-T Mini should run 60 mm wide MadMax SUPERGRIP tires all around, because the 80 mm wide SUPERGRIP tires are a bit too wide for the Mini body shell.The 80 mm wide MadMax tires are reinforced on the inside of the carcass with a special cross pattern in the tread section and ribs in the outside shoulder.MadMax SUPERGRIP tires are available in the following compounds: (embossed marking on the inside shoulder!)Breite:Soft:Medium:60 mm y1464/01y1464/0280 mm y1464/03y1464/04For running an rc-car on tarmac, the following recommendations apply:The dirtier the track or the colder the weather, the stickier (softer) the rear tires should be.A note for the front tires: 2WD cars should run slightly harder tires in front than in rear.On 4WD cars the same compound front and rear is usually a good choice!Of course, like in full scale motorsport it also applies to the MadMax SUPERGRIP tires that the softer the tire the higher the wear. The medium compound tire lasts significantly longer than the soft version!The MadMax SUPERGRIP has a special on-road tread. These tires have excellent grip even after eating up the tread and can be used after that for a long time as slicks!MadMax SUPERGRIP spare rubber can be found here: MadMax SUPER GRIP spare part Some off-road tires knowledge can be found here!
%
MAXI PIN 185 x 75 with black colored MadMax Extreme rims, 20-fold screwed, very tough, with 18 mm square drive and with reinforced beadlock rings for FG, Smartech and many more. The MadMax MAXI PIN tires come with strong special tire inserts which allow transferring the power without canting, even on heavy cars. MadMax MAXI PIN tire was developed specifically for astro turf tracks! The special tread design with 480 studs per tire provides excellent grip, but also a high load on tire and rim! To stabilize the tire, the outer shoulder features radial ribs which minimizes the tilting under load and counteract the shear forces during cornering. Furthermore, the MAXI PIN tire has studs positioned on the outside shoulder, which support the steering in corners. All together the MAXI PIN tires provide maximum grip, which made it necessary to upgrade the beadlock screws on these MadMax EXTREME wheels. So they come with 3.0 mm screws instead of the usual 2.5 mm ones! Nevertheless, tires and beadlocks should be checked after every run. Dimensions: Outer diameter: 185 mm tire width at bead: 70 mm Tread width: 75 mm Reinforced 18 mm square wheel drive Some off-road tires knowledge can be found here!The video shows the 18 mm square drive version. Also available with 24 mm hex.
%
Regular price: 129,90 EURoffer of the month price: 89,90 EURUltragrip 170x80 and 170x60 on black MadMax Extreme rims with 20 beadlock screws, with 18 mm square socket and reinforced orange beadlock rings for FG, Smartech and many more. 150 shifted long lugs and a central, 4 mm high ridge on the 60 mm wide front tire, and 210 pieces of square 6 x 4 mm studs on the 80 mm wide rear tire ensure optimal propulsion! The flattened profile structure of the rows of knobs reduces the directional control and guarantees an exceptionally good on-center feel! This makes the car less prone to unwanted traction rolls! Due to the extreme load created by the MadMax Ultragrip tires the rim was optimized again with a reinforcement ring.The tires are fitted with a special rigid insert, which can handle the cornering forces and maintain the tires shape even on heavy cars. The GPM Ultragrip are designed for use on sandy surfaces.We recommend to check the beadlock screws after the run. Dimensions:Outer diameter: 170 mmFront tire width: 60 mmRear tire width: 80 mmReinforced 18 mm square wheel driveThe video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!
%
OVER LANDER 170 x 80 mm and 170 x 60 mm tires with reinforced orange beadlock rings on black rims. Were designed the OVER LANDER as all-terrain tires that can be used on virtually all surfaces because of its tightly attached lug tread pattern When a terrain includes sand, gravel and grass, the Overlander is the right choice! It can even be used on partially paved tracks!Of course, the OVER LANDER allround tire will not make special purpose tires like the TARMAC BUSTER,BIG DIGGER or CROSS BOND obsolete. Due to the extreme load created by the MadMax OVER LANDER tires the rim was optimized again with a reinforcement ring.The tires are fitted with a special rigid insert, which can handle the cornering forces and maintain the tires shape even on heavy cars. We recommend to check the beadlock screws after the run. Dimensions:Outer diameter: 170 mmFront tire width: 60 mmRear tire width: 80 mmReinforced 24 mm hex wheel driveThe video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!
y1530 Size:
y1530/50 - 50 ml
Genuine HT spare/option part. Differential oil, suitable for Lightscale Smooth, SCS and Mecatech differentials. Specially designed for grippy tracks. The differential oil provides a good locking effect combined with very good traction.Contents:1 piece / 50 ml / 100 ml
%
GIANT GRIP 190 x 70 with black colored MadMax Extreme rims, 20-fold screwed, very tough, with 18 mm square drive and reinforced orange beadlock rings for FG, Smartech and many more.The GIANT GRIP provides giant traction through 96 about one cm² wide and 5 mm high strong lugs, getting ample grip even on loose surfaces like sand and soil.Due to the extreme strain caused by the GIANT GRIP tires the MadMax rim with reinforcement ring had to be optimized once more.The GIANT GRIP tires come with strong special tire inserts which allow to transfer the power without canting, even on heavy cars.Dimensions:Outer diameter: 190 mmTire width at bead 70 mmTread width 80 mmReinforced 18 mm square wheel driveThe MadMax Giant Grip tires use 60 mm wide rims ( y1415/01 or y0761/01).The video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!
%
GIANT GRIP 190 x 70 with black colored MadMax Extreme rims, 20-fold screwed, very tough, with 24 mm hex drive and reinforced orange beadlock rings for Losi 5ive-T and Desert-Buggy XL as well as all HPI Baja 5 B/T cars.The GIANT GRIP provides giant traction through 96 about one cm² wide and 5 mm high strong lugs, getting ample grip even on loose surfaces like sand and soil.Due to the extreme strain caused by the GIANT GRIP tires the MadMax rim with reinforcement ring had to be optimized once more.The GIANT GRIP tires come with strong special tire inserts which allow to transfer the power without canting, even on heavy cars like the Losi 5ive-T.Dimensions:Outer diameter: 190 mmTire width at bead 70 mmTread width 80 mmReinforced 24 mm hex wheel driveThe MadMax Giant Grip tires use 60 mm wide rims ( y1415/01 or y0761/01).The video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!
%
Regular price: [ITEMPRICE]SELF[ENDITEMPRICE] EUROffer of the month price: [ITEMDISCOUNTPRICE]SELF[ENDITEMDISCOUNTPRICE] EURTypical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateCan be charged with 5C when time is criticalRecommended charge with 2 3C (max. 3C)Spezification:Tension: 3S / 11,1VCapacity mAh: 3300Case: SoftCable cross section: 12AWG/3,3Length +/- 5 mm: 135 mmWidth +/- 1,5 mm: 45 mmHeight: +/- 1,5 mm: 25 mmWeight +/- 10g: 300gCont. current: 60C (115,5A)Contents:1 piece
%
Typical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateCan be charged with 5C when time is criticalRecommended charge with 2CConnectors: XT90, XH-balancer. Spezification:Tension: 6S / 22.2VCapacity mAh: 5000Case: SoftCable cross section: 12AWG/3,3Length +/- 5 mm: 150 mmWidth +/- 1,5 mm: 47 mmHeight: +/- 1,5 mm: 48 mmWeight +/- 10g: 742gCont. current: 60C (220A)Contents:1 piece
Regular price: [ITEMPRICE]SELF[ENDITEMPRICE] EUROffer of the month price: [ITEMDISCOUNTPRICE]SELF[ENDITEMDISCOUNTPRICE] EURTypical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateCan be charged with 3C when time is criticalRecommended charge with 2 3CConnectors: EC5, XH-balancer.Dimensions: Length +/- 5 mm: 138,5 mmWidth +/- 1,5 mm: 47 mmHeight: +/- 1,5 mm: 36,5 mmWeight +/- 10g: 363gContents:1 piece
%
Regular price: [ITEMPRICE]SELF[ENDITEMPRICE] EUROffer of the month price: [ITEMDISCOUNTPRICE]SELF[ENDITEMDISCOUNTPRICE] EURTypical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateCan be charged with 3C when time is criticalRecommended charge with 2CConnectors: EC5, XH-balancer.Dimensions: Length +/- 5 mm: 138 mmWidth +/- 1,5 mm: 47 mmHeight: +/- 1,5 mm: 24,5 mmWeight +/- 10g: 254gContents:1 piece
%
Regular price: [ITEMPRICE]SELF[ENDITEMPRICE] EUROffer of the month price: [ITEMDISCOUNTPRICE]SELF[ENDITEMDISCOUNTPRICE] EURTypical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateCan be charged with 5C when time is criticalRecommended charge with 2 3C (max. 3C)Spezification:Tension: 3S / 11,1VCapacity mAh: 3300Case: SoftCable cross section: 12AWG/3,3Length +/- 5 mm: 140 mmWidth +/- 1,5 mm: 43 mmHeight: +/- 1,5 mm: 19 mmWeight +/- 10g: 251gCont. current: 35C (115,5A)Connectors: T-Connector, XH-balancer. Battery color may vary!Contents:1 piece
Regular price: [ITEMPRICE]SELF[ENDITEMPRICE] EUROffer of the month price: [ITEMDISCOUNTPRICE]SELF[ENDITEMDISCOUNTPRICE] EURTypical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateMaximum charge with 2CConnectors: EC5, XH-balancer. Spezification:Tension: 6S / 22.2VCapacity mAh: 8000Case: SoftCable cross section: 10AWG/5.3Length +/- 5 mm: 165 mmWidth +/- 1,5 mm: 43 mmHeight: +/- 1,5 mm: 61 mmWeight +/- 10g: 960gCont. current: 40C (320A)Contents:1 piece
Typical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateCan be charged with 5C when time is criticalRecommended charge with up to 2CConnectors: EC5, XH-balancer. Spezification:Tension: 4S / 14,8VCapacity mAh: 6500Case: HartCable cross section: 10AWG/5.3Length +/- 5 mm: 137 mmWidth +/- 1,5 mm: 46 mmHeight: +/- 1,5 mm: 48 mmWeight +/- 10g: 548gCont. current: 80C (220A)Contents:1 piece
Typical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateCan be charged with 5C when time is criticalRecommended charge with 2CConnectors: EC5, XH-balancer. Spezification:Tension: 4S / 14,8VCapacity mAh: 5000Case: HartCable cross section: 12AWG/3,3Length +/- 5 mm: 137 mmWidth +/- 1,5 mm: 46 mmHeight: +/- 1,5 mm: 48 mmWeight +/- 10g: 548gCont. current: 60C (220A)Contents:1 piece
Typical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateCan be charged with 5C when time is criticalRecommended charge with 2 3C (max. 3C)Spezification:Tension: 3S / 11,1VCapacity mAh: 3300Case: SoftCable cross section: 12AWG/3,3Length +/- 5 mm: 135 mmWidth +/- 1,5 mm: 45 mmHeight: +/- 1,5 mm: 25 mmWeight +/- 10g: 280gCont. current: 20C (115,5A)Contents:1 piece
Specifically made to fit the Losi 5ive-T battery box. Soft case with reinforcement plates at the top and bottom and padding at the ends.Typical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateRecommended charge with 1CSpezification:Tension: 2S / 7,4VCapacity mAh: 5200Case: SoftCable cross section: 12AWG/3,3Length +/- 5 mm: 105 mmWidth +/- 1,5 mm: 60 mmHeight: +/- 1,5 mm: 23 mmWeight +/- 10g: 208 mmCont. current: 5C (26A)Connectors: Universal and EC3, XH-balancer. Battery color may vary!Contents:1 piece
%
Description :Practical plastic transmitter case with zip fastener. Ideal for safe transport of the remote control transmitter and for protected storage at home. The inside of the case is padded with foam. The transmitter is additionally secured against slipping by a strap in the case. The outside of the case features white logo prints. The protective bag for the transmitter and the shoulder strap complete the scope of delivery.
Thanks to the variable compartment dividers with Velcro fastener, the case fits both desk transmitters (FX32 / FX36) and handheld transmitters (T18SZ / T32MZ) or car transmitters (T7PX / T10PX). Technical data
External dimensions: 390 x 275 x 200 mm
Internal dimensions: 375 x 250 x 160 mm Features
Plastic transmitter case
Hinged lid with zip fastener
Inner part padded with foam
Suitable for all FUTABA transmitters
Separate protective bag
Hanging strap
Scope of delivery
Plastic transmitter case
Separate protective bag
Hanging strap
Translated with DeepL.com (free version)