96 products found for "mielke_5096"

rc-car-online - Home

Mielke 5096 tuned pipe sealing set, 2 pcs.

Original Mielke sealing set for tuned pipes.

€9.90*

Mielke Hurrican steel wool packing, 5093, 1 pce.

Replacement packing for the Hurrican system.

€5.90*

Mielke 5099 O-ring 20 x 3 mm , 2 pcs.

Genuine Mielke replacement part.Set with 2 viton o-rings to seal the Masterfix connector from manifold to pipe. Isolates the pipe from engine vibrations.O-ring fits Mielke plug systems and FG #6299. Dimensions:Inner diameter: 20 mmOuter diameter: 26 mmThickness: 3 mm

€3.90*

Mielke Hurrican o-rings, 5092, 2 pcs.

Replacement o-rings for the Hurrican system.

€5.90*

5476/01 Mielke HR Wheel nuts M8

Mielke wheel nuts for 8 mm axles!

€29.00*

Mielke 5705/01 plug manifold for 5705

Genuine Mielke spare/option part. Original replacement part for Mielke no 5705 plug tuning pipe.Contents:1 piece

€39.50*

Mielke 5226 o-ring set for air filter no. 5201 and 5201/01, set

Item N° Mielke 5226 o-ring set for air filter open upblau no. 5201, setO ring set for the blue Mielke air filter with the order numbers: 5201 and 5201/01

€12.90*

Mielke 5447/03 Springs 2 mm made from special steel

Genuine Mielke spare/option part. Replacement part for Mielke Power Gearshift clutches #5440 and #5441.Content:3 pieces

€9.90*

Mielke 5185 Big Power muffler set for Losi 5ive-T/2.0 and Mini

New Big-Power muffler with volume increased by about 30%, therefore especially suited for 26 - 32 cc engines.Made from aluminum tubing with a steel manifold this tuned pipe system has a lower weight than comparable units.Pure power over the complete rpm range!Fits Losi 5ive-T and Mini WRC

€249.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Exhaust manifold Mielke Masterfix Leopard, y0242, 1 pce.

Fits Mielke Masterfix tuned pipe only

€39.90*

5646/3 Mielke Mix linings "NEW" for Power Gearshift Converse II clutch

Neue Mielke Mix Beläge für die Gearshift 2 Kupplung (die Blaue).3 Stück2 x Beläge in Aluminium1 x Kupplungsbelag in Aluminium mit eingesetzem Carbonteil.Dieses Carbonteil ist notwenig um die Kupplungsglocke sauber von Aluminiumabrieb zu halten.

€54.90*

Mielke 5476 Safety wheel nuts with additional screw M6

Genuine Mielke spare/option part. Contents:4 pieces

€29.00*

5446/01 Mielke Clutch shoes aluminum for Power Gearshift clutches, set of 3

Genuine Mielke spare/option part.Clutch shoes for Mielke Power Gearshift clutches part numbers 5440, 5441 and 5442.Content:3 Pieces

€44.90*

6061 Mielke pull starter with hybrid starter function

Genuine Mielke spare / option part.Starting by pull starter or by cordless screwdriver or electric starter is possible.Pull starter with hybrid starter function. Who does not know it? A torn starter rope, blisters on your finger from constant pulling or a defective starter pawl. All these problems are a thing of the past with the hybrid starter.With the help of a cordless screwdriver the engine can be started very easily and if the battery of the cordless screwdriver is empty, the engine can be started by using the conventional way with the pull-rope starter.Please note:The starter shaft for electric start is inserted in a straight line in extension of the crankshaft. No part of the vehicle must be in the way here. On a model with a longitudinally mounted engine (e.g. Losi 5ive or DBXL vehicles) the rear axle will usually prevent the use of the electric start. The normal pull start by cable remains possible.Contents:1 piece

€114.90*

5187/XL2.0 Mielke Losi DBXL 2.0 tuned pipe exhaust system for 26 - 32 cm³

Genuine Mielke spare/option part.The tuned pipe system from premium manufacturer M. Mielke was specifically designed for Losi DBXL 2.0 in combination with large displacement and modified engines.The elaborate, angled design, makes best use of the available space in the DBXL 2.0 allowing for optimum performance! When designing the system, it was especially important to maximize the distance to the battery box of the DBXL 2.0 in order to minimize the thermal load on the battery. At the same time, the large distance improves access to Box. Contents:1 set

€279.00*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Mielke 5642/02 Front cover for Power Gearshift II clutches no. 5642 and 5652

Genuine Mielke spare/option part.Front cover for Mielke Power Gearshift II clutches part numbers 5642 and 5652.Content:1 piece

€39.90*

5647/1 Mielke Springs 2 mm made from special steel for Converse left

Genuine Mielke spare/option part. Contents:3 pieces

€9.90*

Mielke 5446 Mix clutch shoes 2x aluminum / 1x carbon for Power Gearshift clutches

Clutch shoes for Mielke Power Gearshift clutches part numbers 5440, 5441 und 5442.

€44.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

5100 Mielke Sidepower tuned pipe system for Carson Wild GP Attack and HPI Baja 5B / 5T

mielke_5100 Manifold: 5102 with Steel Manifold+ 20EUR

Genuine Mielke spare/option part. Complete exhaust system for Carson Wild GP Attack, HPI Baja 5B and 5T, with steel manifold and mounting hardware included.The pipe is mounted well protected bythe chassis. The lightweight pipe keeps the c.o.g. low.Contents:1 Set

Variants from €169.90*

€189.90*

5900 Mielke Big Tornado Titanium tuned pipe muffler system DMC #10-1503 with manifold

Genuine Mielke spare/option part. We took a very long time to test this mufflerer thoroughly and to test and compare small changes again and again already in summer 2017 on different vehicles on different race tracks. All experiences were then analysed in detail and combined with the bench tests from last year and, of course also from winter 2018, to the current final product no. 5900.The very good results and the weight optimization (titanium is approx. 40% lighter compared to steel) along with the great racy look should give us a perfect tuned pipe system for 1/5 touring cars.Modified engines, which are widely used, are especially grateful for the low thermal expansion (approx. 40% less) and the high temperature resistance (perfect for exhaust gases).The material used is only 0.7 mm thick and yet very strong.Combined with the very well tested Masterfix connection (3 springs connect the manifold to the pipe) and the Teflon gasket, which has been tested for years, there will also be no problems with the connection to the manifold.Contents:1 piece

€419.00*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

5651 Mielke Power Gearshift II Converse clutch for FG Evo / RS5 TC / Harm SX3, 2,4 mm springs, Mix with long clutch carrier

Genuine Mielke spare/option part. Fits FG Evo / RS 5 Tourenwagen / Harm SX 3 / Losi 5ive / Losi DBXL / HPI Baja.Backwards installedshoes make this clutch a "Converse" clutch!After many successes with the "normal" Power Gearshift clutch this is the next step.Made of high-strength aluminium 7075-T6! All components, including the pads, are manufactured on precision machines.Contents:1 piece

€129.50*

Mielke 5500/1 Spare gaskets for Mielke 5500 Tornado-Power, set

Part number: Mielke 5500/1Spare gaskets for Mielke 5500 Tornado-Power, setFive o-rings plus one header gasketDimensions:Thickness: 2,5 mmInner diameter: 20 mm

€8.00*

Mielke 5443 Power Gearshift clutch for FG (except Formula 1+Evo2020), Smartech, Harm, Losi and HPI, carbon pads, 2,3mm springs

The new adjustable system features three carbon pads with special 2.3 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm.

€129.50*

Mielke 5742 Power Gearshift clutch for FG Formula 1, FG EVO2020, Harm, RS5, 2,0mm springs, Carbon with short clutch carrier

Genuine Mielke spare/option part. For use in the rain or with little grip.The new adjustable system features three carbon pads with special 2.0 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm. Contents:1 pieceNot fit in FG Formel 1 Sportslins models!

€129.50*

96 products found for "mielke_5096"

Filter products

rc-car-online - Home