5702 Mielke special Teflon gasket for all Masterfix systems

€8.95*

Prices incl. VAT plus shipping costs

Available

Product number: mielke_5702

Product information "5702 Mielke special Teflon gasket for all Masterfix systems"

Special Teflon gasket, fits all Mielke Masterfix systems.

Dimensions:

Length: 19.4 mm
Inner diameter: 19.9 mm
Outer diameter: 24.7 mm

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Kunden haben auch gesehen

FG Off-Road Buggy WB535 2WD HT-Edition

The FG Off-Road Buggy WB535 is presented with a longer wheelbase and a pleasant design. Painted body shell to choose, all-wheel-drive, completely mounted ready-to-drive, combined with the open Off-Road Buggy body shell with metal roll cage and gigantic Off-Road rims with low-profile knobbed tires.The body painted either finished or unpainted. The body shell is standard unpainted. Equipped with a 26cm³ engine the Off-Road Buggy is aggressive and also a tremendous jumper. The 35 mm wheelbase extension results in a higher tracking stability. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Equipment of the modelAngled 4 mm, alloy chassis, completely covered belt drive, two differential gears at front and rear axle with hardened bevel gearwheels, closed front axle housing, front bumper, double wishbones at front and rear axle, gear brake, adjustable right/left thread rods at the track rods and at the front and rear wishbones, front uprights with steering stops, gearwheels made of case-hardened steel, completely ballbeared, four large-volume oil-pressure shock absorbers, receiver box.According to side rails and the closed body shell the Off-Road Buggy is almost protected against dirt from underneath. The two-parts body shell is made of polycarbonate, the rear spoiler is made of impact resistant polyamide. Driver´s coverage and roll cage parts are made of aluminum. The giant low-profile knobbed tires are glued on black rims.The model is equipped with a powerful 26cm³ (series) combustion engine with ready-for-use oiled air filter. The engine runs with normal 2-stroke petrol-oil mixture (available at every patrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-stat system the engine can be started without any difficulties. HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount bigCNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included. Value: 64,95 EUR Alloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EUR Ball bearing set, sealed, set of 14The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 227,35 EURThe RTR version is delivered with installed and preset radio control system and rechargeable batteries. To complete the non-RTR version all popular servos and radio control systems are suitable.The pictures may display the car with some optional items which are not included, like bed-mounted rollbar, lights, front bumper or mirrors. These items can be added in the drop down menus.Measures:Length: 770 mmWidth: 480 mmHeight: 280 mmWheelbase: 535 mmWeight: 10,8 kg

€1,049.90*

Configure now

Mielke 5096 tuned pipe sealing set, 2 pcs.

Original Mielke sealing set for tuned pipes.

€9.90*

5476/01 Mielke HR Wheel nuts M8

Mielke wheel nuts for 8 mm axles!

€29.00*

5705 Mielke Big Tornado tuned pipe

Genuine Mielke spare/option part. Even better uniform power over the whole speed range. Especially in the major driving areas from 10.000 rev / min. to full speed. With 560 grams ideal weight for balanced driveability. Center of mass as low as possible new construction. Only 0,8 mm of specially thin steel metal.Compared to its predecessor the tube's diameter increased for about 10 mm. which allows for the better performance. The new set also comes with teflon seal # 5702.Including manifold and mounting material.Suitable for: 1:5 on road 2WD FG Sportsline, Evo- and Competition cars Mecatech FW01 S88R Harm SX4, SX5 Genius Contents:1 piece

€249.00*

5194 Mielke Cross-Power Mounting set

Mounting set for Cross-Power tuned pipe for Smartech UNO and Carson Attack

€24.90*

LOS251012 Radio tray & gas tank mount Losi DBXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 set

€59.99*

Cutsomers also bought

2012-133 Mecatech Balls for Drive Shaft

Genuine Mecatech spare/option part for the FW01.Content:6 pieces

€5.50*

Mielke 5099 O-ring 20 x 3 mm , 2 pcs.

Genuine Mielke replacement part.Set with 2 viton o-rings to seal the Masterfix connector from manifold to pipe. Isolates the pipe from engine vibrations.O-ring fits Mielke plug systems and FG #6299. Dimensions:Inner diameter: 20 mmOuter diameter: 26 mmThickness: 3 mm

€3.90*

y1218 Springs for drive shafts

Genuine HT spare/option part. The best solution for drive shaft positioning, can be used with ball drives or regular "dog bones" as well.The springs will be simply inserted into the drive cups.DImensions:Diameter: 11 mmHeight: 8 mmContents:4 piece

€4.90*