LOSB5045 Losi 20T Pinion Gear, 1.5M & Hardware 5ive-T/2.0, TLR 5ive-B und Mini WRC
€27.99
% €29.99 (6.67% saved)
Available
Product information "LOSB5045 Losi 20T Pinion Gear, 1.5M & Hardware 5ive-T/2.0, TLR 5ive-B und Mini WRC"
Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini WRC.
Technical info:
- Modul: 1,5
- Teeth: 20 pieces
Contents:
- 1 piece
Login
Alternatives
Genuine Losi spare/option part. Contents:1 piece
Genuine Losi spare/option part. Contents:1 piece
Customers also bought
Item N° LOSB 3214 Center Diff Outdrive Set 5T, 2 pcs.Content:2 Pieces
Genuine Losi spare/option part. Suitable for Losi 5ive-T, TLR 5ive-B and 5ive Mini WRC. Part is delivered in silver or black color from vendor!Measures and content:4 x 18 mm - 6 pieces5 x 25 mm - 4 pieces4 x 20 mm - 6 pieces
Sintered steel clutch for Zenoah and many other rc-car engines from 23 cm³ to 32 cm³. incl. clutch spring!Note: The sintered steel clutch needs a break in period of at least half an hour run time after their first installation. Only then the clutch surface reaches the desired grip and provides the necessary friction. After that the clutch will show consistent operation and extremely low wear!With 80 grams the weight of the clutch is about the same as the usual OEM clutches.As with all non-adjustable clutches a periodic monitoring of the clutch spring is recommended. By changing the spring, it is also possible to match your car to the track conditions, i.e.: the harder the spring, the higher the stall speed of the clutch.If not on hand, for installation of the sintered steel clutch a clutch spring, the Zenoah screw set # 7318 and the original Zenoah clutch mount # 7315 are required!
Genuine HT spare/option part. Helpful tool for removal of clutch shoes, flywheels and many more.FitsZenoah G230/G240/G260/G270/G290/G320Chung-Yang enginesPT enginesLosi enginesHPI enginesThreadsize:M10 x 1Contents:1 piece
Genuine HT spare/option part. Especially for CY / Zenoah G230/240/260/270/290/320, HPI and Losi engines.Can be used for removal of the standard clutch as well!Contents:1 piece
Genuine Losi spare/option part. Contents:1 piece
Customers also viewed
Genuine Losi spare/option part. Contents:1 piece
Genuine Losi spare/option part. Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini WRC. Technical info:Modul: 1,5Teeth: 18 piecesContents:1 piece
For changing the locking effect of large scale car differentials.Top quality in 50 ml plastic wide-neck bottles.Silicone oil / grease with a viscosity to choose:15.00030.00050.000100.000300.0001.000.0002.000.000Viscosity of silicone oil at various temperatures.
Content: 50 Milliliter (€298.00 / 1000 Milliliter)
Hardened steel pinion set for Losi 5ive-T, 5ive-B and Mini, with corresponding engine mount inserts included. All parts with laser etched tooth count.Please note: The pinion do fit the 5ive-T 2.0 as well, of course. However, you then have to use the 5ive-T 2.0 engine mount inserts of the appropriate tooth count, inserts from the 5ive-T do not fit! Available with 16, 18T/20T/21T. The 19T pinion is stock equipment in Losi 5ive-T and Mini, 20T is stock in the 5ive-B.The 16T pinion is profile shifted and has the same dimensions as a normal 18T pinion.It is specially made for vehicles where the stock tires are replaced by much larger diameter rubber (i.e. monster truck tires and MadMax Giant Grip).Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn´t really matter.SLO5T018T replaces LOSB5046 and LOSB5805SLO5T019T replaces LOSB5044 and LOSB5801SLO5T020T replaces LOSB5045 and LOSB5802The higher the tooth count, the higher the top speed!
Item N° 6433 Steel pinion 20 teeth - 1pce.For combination with 44T main spur gear.Diameter 32.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5