LOS352008 Losi Pinion Gear and Hardware, 22T, 1.5M for 5ive-T 2.0
€29.99
Available
Product information "LOS352008 Losi Pinion Gear and Hardware, 22T, 1.5M for 5ive-T 2.0"
Contents:
- 1 piece
Login
Customers also bought
Diameter 115 mmWidth 90 mm18 mm wheel square, with reinforcement ring
Genuine FG spare/option part. Washers for the screws (M4 / M5) that hold the engine mounts to the chassis. Suitable for all FG models.Dimensions:Outside diameter: 15 mmInside diameter: 6 mmContents:4 pieces
Item N° LOSB2581 Mud Flap & Retainer Set 5T, 2 pcs. Inclusive mounting parts.
For sealing the axles on Losi 5ive-T and Mini cars, keeps debris out of the inner screws which secure the retainer pin. Set of 4 or set of 10 to choice.Can be used for Losi 5ive-T, Mini and HPI Baja cars.
Genuine Losi spare/option part.Fits Losi 5ive-T and 5ive Mini.
Customers also viewed
Genuine Losi spare/option part. Contents:5 pieces
Genuine Losi spare/option part. Contents:1 piece
This reed valve system converts a normal piston-port engine into a reed valve engine. It offers the advantage of increased intake duration for a better charge for more power. As a positive side effect no fresh gas loss occurs during the downward movement of the piston because the membranes close this path.The reed valve block replaces the usual stock insulator. To use the advantage of the reed system, it is necessary to modify the piston skirt on the intake side. Depending on the engine it is advantageous for best results, to slightly match the cylinders intake port to the Epoxy insulator plate at the bottom of the reed valve system. Both steps are described in the installation instructions for Zenoah and Chung Yang engines. Our thanks for these instructions go to our customer Thomas Hoenicke.Note: For the time being the epoxy insulator plate must be slightly reworked to fit a G320 Zenoah engine. The manual has been written with the conversion of a G320, the affected area for modification is therefore shown.The unit is 24.5 mm high.
Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-B, 5ive-T and Mini WRC.Contents:1 set
Reduced cross-section and flow-optimized transfer port cover plates for improved and faster gas flow for the Zenoah G320. The improved gas flow rate improves speed and gives faster throttle response in the medium rpm range. To improve mixture formation, the plates were glass bead blasted after machining.
Genuine Losi spare/option part. Contents:1 set
Genuine Losi spare/option part. Contents:5 pieces