AKX177 GPM Piggyback reservoir shocks or Arrma Kraton 8S, front

€84.90*

Available

Product number: gpm_akx177

EAN: 4058575139300

Product information "AKX177 GPM Piggyback reservoir shocks or Arrma Kraton 8S, front"

Genuine GPM spare/option part.

The GPM piggyback reservoir shocks increase the oil volume and the separate vent screw makes filling the shocks easier. Shocks come in pairs including all-metal lower ball joints, spring perches and two pairs of springs with 2.6 mm and 2.8 mm wire diameter. Reinforced shock shafts with 6 mm diameter.

Fits Arrma Kraton 8S front suspension application only!

Length extended/compressed (center-to-center of mounting points): approx. 180 mm/125 mm.

Contents:

1 set

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

ARA320617 ARRMA Bumper And Skids for Kraton 8S EXB

Genuine ARRMA spare/option part. Contents:1 set

€29.99*

AKX10 / + 11MM GPM wheel spacers for Arrma Kraton 8S

Genuine GPM spare/option part. GPM GPM wheel spacers for Arrma Kraton 8S, CNC-machined from 6061-T6 aluminum. Tread width is increased by 11mm per side / 22mm in total, fits front and rear.Does not fit Outcast rims due to their different design on the inner side!Contents:2 pieces

€29.90*

AKX005 GPM Closed wheel nuts for Arrma Kraton/Outcast 8S

Genuine GPM spare/option part. Closed wheel nuts made of 6061T6 aluminum from GPM, suitable for Arrma Kraton/Outcast 8S.Secure hold of the rim due to large flange with 34 mm diameter and serrated surface.Wrench size: 24 mmThread size: M18x1,0Thread depth: 9 mmContents:4 pieces

€19.90*

AKX008 GPM aluminum hinge pin brackets front suspension, lower, for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. Milled 6061T6 aluminum additional heat sink from GPM with larger 12 volt fan (60 x 60 x 15 mm) for Arrma Kraton / Outcast 8S. The additional heat sink also serves as an adapter plate to mount the larger fan on the original heat sink. A machined contact guard for the intake side of the fan is also included.The fan is connected to the EC5 connector of a 3S or 4S drive battery using an adapter cable (included). Thus, the operating current does not have to be provided by the ESC's BEC.The overall height of the unit, measured from the bottom of the additional heat sink is about 30 mm.Contents:2 pieces

€29.90*

AKX054 GPM aluminum a-arms front upper for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM front upper aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushings for the wishbone pin.Comes complete with wishbone pins (direct replacement for original sets ARA330561 and ARA330564).Contents:2 pieces

€39.90*

AKX009 GPM aluminum hinge pin brackets rear axle, lower, for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM aluminum lower hinge pin brackets rear axle for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. With this set, the multi-part front bracket is replaced by a one-piece design with plastic bushings.(Replaces original sets ARA330555, ARA330588 and ARA330557)Contents:2 pieces

€29.90*

ARA320591 ARRMA Aluminium Motor Plate 56 Series red for Kraton / Outcast 8S

Genuine ARRMA spare/option part. This red Aluminum Motor Plate is specially designed to provide a safe and secure mounting point for your 56 series motorFeaturesPrecision manufactured from lightweight aluminum for reduced vehicle weight and consistent hardware fit - Anodized red for cool ARRMA looks and increased durability - Precision manufactured screw mounting holes for fast and easy servicing - 1.18 inch (30mm) screw pitch - Aluminum material will assist in dissipating heat during extreme RC actionContents:1 pieces

€39.99*

ARA330749 ARRMA Shock Set rear Kraton 8S EXB

Genuine ARRMA spare/option part. This assembled 188mm Shock Set, featuring 6mm thick shock shafts and heavy duty rod ends, provides ideal replacement parts for your ARRMA vehicle.Precision manufactured red anodized aluminum shock bodies - Smooth polished stainless steel shock shafts - Tough composite molded parts - Supplied assembled without springs - Features 6mm thick shock shafts and heavy duty rod ends for awesome durability - Pre-filled with 700cSt silicone shock oil - Supplied fitted with 8 hole 1.5mm shock pistons - Ready to bolt on to your vehicle after fitting your choice of spring - Threaded spring preload adjusters included for fine-tuning vehicle ride heightContents:2 pieces

€99.99*

AKX055 GPM front lower aluminum a-arms for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM front lower aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushing for the wishbone pin.(Direct replacement for original set ARA330589)Contents:2 pieces

€59.90*

MAKX177F+R GPM shocks for Arrma Kraton 8S, front and rear, 2 pairs

Genuine GPM spare/option part. These GPM shocks are basically the same as the piggyback version, just without the piggyback. This allows for a more budget-friendly price.Shocks come in pairs including all-metal lower ball joints, spring perches and two pairs of springs with 2.6 mm and 2.8 mm wire diameter. Reinforced shock shafts with 6 mm diameter.Fits Arrma Kraton 8S only!Front:Length extended/compressed (center-to-center of mounting points): approx. 180 mm/125 mm.Rear:Length extended/compressed (center-to-center of mounting points): approx. 190 mm/131 mm.Contents:1 set

€119.90*

AKX040 GPM Aluminum wheelie bar with wing mount for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. Milled 6061T6 aluminum wheelie bar with wing mount for Arrma Kraton / Outcast 8S.Significantly stronger than the stock part, it also offers an adjustment option for the angle of the wing.Double ball bearing 55 mm diameter wheels made of Delrin with replaceable O-rings as "tread".Contents:1 set

€89.90*

MAKX021 GPM Aluminum front spindles, Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. Front spindles from GPM for Arrma Kraton / Outcast 8S, machined from 6061 aluminum. Extremely torsion-resistant and robust.Contents:2 pieces

€64.90*

Customers also viewed

y1137/03 GPM-Big Bore Premium shock absorbers for FG Marder/Offroad Buggy 4WD, set

Set consists of 4 dampers. Premium version, suitable for FG, Carson / Smartech etc. Fully assembled and filled. Special features: 16 mm inner diameter for higher oil volume Volume equalisation Housing and screw connections made entirely of aluminium Hard anodised housing Precision piston made of Delrin, machined (no moulded part!) Aluminium piston rod base and aluminium spring plate Replaceable bearing bushes in the mounting eyes Pre-filled with 1000 silicone oil. For the following models: FG 4WD: Marder, Off-Road Buggy Set contents: Four long shock absorbers, one pair of shock absorbers has the upper mount with 5 mm bore. We recommend our progressive off-road tuning shock absorber springs from the "Dirt-Spring M" series, part number y0321, for the shock absorbers. The original springs can also be used on FG models! Silicone oil recommendation: The GPM-Spezial Cross shock absorbers are filled with silicone oil viscosity 1000. This viscosity provides very good damping properties at normal outside temperatures. If softer damping is required, oil with a viscosity of 500 or 600 is recommended; for harder damping, 1500 or higher is recommended. One 50 ml bottle of y0038 is sufficient for five long or six short dampers.

€149.90*

SB132F/L GPM Front Piggyback Shock absorbers for Super Baja Rey (incl. 2.0)

Original GPM Ersatz-/Tuningteil.Shock absorber for Super Baja Rey (incl. 2.0) with external volume compensation in all-metal design, spring perches and lower ball joints are also made of aluminum. Oversized 7 mm diameter piston rod.Mounting hole spacing: extended approx. 134 mm, compressed approx. 103 mm. Dimensions springs: 9 coils 2,5 mm wire thickness approx. 88 mm free length 24 mm inner diameter Contents:2 pieces

€99.90*

y1129 Mecatech hydraulic brake Expert for FG, Carson and many more, incl. brake bleeding set

Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all accessories (see also our pictures) required for installation.One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline and E (in connection with alloy front uprights y0932Bleeding instructionsDimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set

From €179.90* €219.90* (18.19% saved)

Details