Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

P-CB10PX Futaba T10PX 2.4GHz with R404SBS receiver

Product information "P-CB10PX Futaba T10PX 2.4GHz with R404SBS receiver"

robbe top image
The T10PXR is a 10-channel 2.4GHz computer radio control system with F-4G,T-FHSS SR / T-FHSS / S-FHSS and MiniZ modulation modes. The transmitter convinces with new design, new keypad and high quality carbon elements. New additions are some new buttons, 2- and 3-position switches and a rocker switch at the base of the transmitter.

The Futaba T10PX comes with many new features that make the new RC-car radio flagship a very flexible transmitter.

With 10 channels and many configuration options, the possible uses go far beyond those of a conventional car radio.
From racer and drifter to crawler and boat to complex function models, everything is possible.

Overview of the modulation types:
  • F-4G, 10 channels / telemetry
  • T-FHSS-SR, 4 channels
  • T-FHSS, 4 channels / telemetry li>
  • S-FHSS, 7 channels


The new F-4G transmission protocol has been further improved compared to T-FHSS SR. Latency has been significantly reduced again and the range extended. At the same time, the receivers have become smaller.

The optical center of the T10PX is the backlit 4.3 inch TFT color touch display with brilliant colors and high sharpness. Even in direct sunlight, all values on the display can be read excellently. The graphic user interface with the well-known easy to use Futaba menu structure, ensures easy operation. Navigation is intuitive via the screen and the additional buttons on the top of the transmitter.

TELEMETRY


Synchronized, bi-directional communication between transmitter and receiver with high telemetry data rate (up to 9 times per second), without loss of control channel response. Maximum of 31 telemetry sensors, alarm tone setting and output via beeper, vibration alert or voice output via internal speaker or optional headphones/active speaker.
  • Telemetry data recording on SD card (SDHC)
  • Telemetry data analysis via spreadsheet programs or LogView software
  • Real-time display of telemetry data on integrated display
  • Receiver signal strength indicator for monitoring the range
  • Receiver undervoltage warning system for monitoring of the receiver battery
  • Connection of up to 31 sensors to the S.BUS2 input




S.BUS-TECHNOLOGY


  • Connection option for S.BUS2 sensors
  • All S.BUS servos can also be connected to normal servo outputs of the receiver
  • Digital BUS technology for model sports
  • Allows ideal placement of all components with efficient wire routing
  • Future-proof, digital technology for all future Futaba components

Features:

  • Color LCD Touch Screen 4.3 Inch
  • F4G System & Telemetry
  • S-FHSS & T-FHSS
  • Super Response (SR) Mode
  • MiniZ S-FHSS
  • 10 channels
  • 40 models memory
  • additional 3- and 2-step switches
  • Brake mixer for large scale cars
  • 4-wheel steering mixer
  • Dual ESC mixer
  • Mixer for track drives
  • CPS LED mixer
  • Gyro adjustment via T10PX
  • microSD Slot (Data Log / Update)
  • USB port

Content of delivery

  • Transmitter T10PX
  • Receiver 404SBS
  • Instruction manual DE/UK
  • Accessories
Responsible company
Minicars Hobby Distribution AB
Annelundsgatan 17
74940 Enköping
Sweden
Responsible person
Henrik Gustafsson
Annelundsgatan 17
74940 Enköping
Sweden

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Similar products

Average rating of 0 out of 5 stars

TT0989/7PX TopTuning Racing-Team Alloy transmitter case, Futaba T7PX Design
Genuine TopTuning spare/option part.Top quality lockable aluminum transmitter case in Futaba T7PX design. Case has plastic feet on bottom and back.The case lid features a lock on either side of the handle and a ribbed foam insert on the inside.Comes with 2 keys includedOuter dimensions: length approx. 320 mm Width: approx. 240 mm Height: approx. 160 mm Weight: 1.5 kgContents:1 piece

€79.90*

Average rating of 0 out of 5 stars

TT0989 TopTuning Racing-Team Alloy transmitter case
Genuine TopTuning spare/option part.Top quality lockable aluminum transmitter. Case has plastic feet on bottom and back.The full-surface foam inlay, divided into 15 mm blocks, allows the transmitter case to be individually adapted to each transmitter and its accessories.See example picture with Futaba transmitter!Of course, it is also possible to adapt the pre-cut foam inlay to other high-quality objects.The case lid features a lock on either side of the handle and a ribbed foam insert on the inside.Comes with 2 keys includedOuter dimensions: length approx. 320 mm Width: approx. 240 mm Height: approx. 160 mm Weight: 1.5 kgContents:1 piece

€69.90*

Average rating of 0 out of 5 stars

VP99635 Transmitter Battery Li-Po 7,4V 2200mAh
2-Cell 7.4V 2200mAh LiPo Transmitter BatteryThis is a transmitter only, rechargeable LiPo battery pack that fits some Futaba transmitters and also other radio brands. Fits Futaba Transmitters: T4PM T4PLS T4GRS T4PV T4PX T6KT7PX T7XC (tight fit) T8J T10JT10PX T12K T14SG T16SZ T18SZ FX20 FX36 Make sure the transmitter battery settings are for 2S LiPo with alarm cut-off set to 6.4 volt. Specs: Type: LiPo Transmitter Battery Power Connector: Futaba Power Wire: 22AWG Balance Connector: JST-XH Battery: 2S1P LiPo Nominal Voltage: 7.4V/2S Max Charge Voltage: 4.2V/Cell Mac Charge Current: 2.2A (1C) Capacity: 2200mAh Energy: 16Wh Storage Voltage: 3.7-3.8V/cell Size: Length: 73mm Width: 45mm Thickness: 15.5mm Weight: 98g Tech Notes: Charge the battery outside the transmitter with a LiPo balance charger equipped with an Futaba adapter lead and XH balancing connector Set the charger to "LiPo", 2s, 3.7v/cell

€28.90*

Average rating of 0 out of 5 stars

Futaba 4PM-PLUS Transmitter with R304SBS receiver
T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS:In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response. SR system does not support telemetry function. *R304SB and R304SB-E are not compatible with SR system.T-FHSS MINIZ SYSTEM:By changing to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42. Dedicated Kyosho receiver RA-42 requires purchase separately.FHSS MINIZ SYSTEM:By changing to the MI-FH system in the receiver setting menu, you can use Kyosho Mini – Z FH FS-RM005 module to connect to non-Evo Mini-z.TELEMETRY SYSTEM:The T4PM+ transmitter has adopted the newly developed bidirectional communication system “T-FHSS”.2.4 GHZ SS RADIO COMMUNICATION SYSTEM:Frequency channel setting is unnecessary: Channel shifting takes place within the 2.4 GHz band automatically. This system minimizes the interference from other 2.4 GHz systems.MODEL MEMORY FOR 40 MODELS:Model names can use up to 10 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function.4-AXIS JOG BUTTON:The (JOG) button can be operated in 4 directions: up, down, left, and right.ESC-LINK FUNCTION (MC-LINK):This dedicated function allows you set up the Link software so that your T4PM can control variable frequency and other data changes in Futaba speed controllers (ESCs): MC970CR, MC850C, MC851C, MC602C, MC402CR, etc.S.BUS SERVO:This is a special function that allows setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software. In addition to the conventional wired system, it can be set wirelessly in combination with the R334SBS or R334SBS-E.STEERING MIXING:Smooth cornering is possible by independent left and right steering servo setting.BRAKE MIXING FOR LARGE CARS (BRAKE):Brake mixing of the front and rear wheel of 1/5 gas power cars and other large cars can be adjusted independently.GYRO MIXING (GYRO MIX):The sensitivity of Futaba car rate gyros can be adjusted from the T4PM.4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE (4WS):This function can be used with crawlers and other 4WS type vehicles.DUAL ESCS MIXING FOR CRAWLERS CARS (DUAL ESC):ESCs at the front and rear are controlled independently.CPS-1 MIXING (CPS MIX):LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only.ANTI-SKID BRAKING SYSTEM (TH A.B.S):This function applies the brakes so that the tires of gas powered cars, etc. do not lose their grip on the road even when braking at corners.THROTTLE ACCELERATION (ACCEL):Gas power cars have a time lag before the clutch and brakes become effective. The throttle acceleration function reduces this time lag.THROTTLE SPEED (SPEED):Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption.STEERING SPEED (SPEED):When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted.RACING TIMER (TIMER):The lap timer can record 100 lap times and total time. The timer can also be started automatically by trigger operation. The race time and audible alarm can be set. Re-/fueling time are indicated by an audible alarm. An up timer is also provided.FUNCTION SELECT SWITCH (SWITCH)/DIAL FUNCTION (TRIM DIAL):This assigns functions to 2 switches and dials (digital trim, digital dial). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital.TRIGGER POSITION CAN BE CHANGED:The position of the throttle trigger can be moved forward and backward.TENSION ADJUSTMENT FUNCTION:The tension of the steering wheel and throttle trigger springs can be adjusted from the outside.MECHANICAL ATL ADJUSTMENT:Make this adjustment when you want to decrease the total travel of the brake (push) side of the throttle trigger.YOUR T4PM-PLUS INCLUDES THE FOLLOWING COMPONENTS:T4PM-Plus TransmitterR304SBS ReceiverDry Battery HolderMini ScrewdriverTRANSMITTER SPECS:T-FHSS SR/T-FHSS/S-FHSS SYSTEM, WHEEL TYPE, 4 CHANNELSCOMMUNICATION METHOD: Bidirectional protocolMAXIMUM OPERATING RANGE: 100m (Except the MINIT system) (Optimum condition)FOR SAFETY: F/S, B-F/S, IDTRANSMITTER FREQUENCY: 2.4GHz bandRF POWER OUTPUT: 100mW EIRPPOWER REQUIREMENT: (Dry Cell Battery) Penlight x 3 (4.5 V)CURRENT DRAIN: 150mA or lessTRANSMISSION ANTENNA: 1/2λ di-poleR304SBS Specs:T-FHSS SRSIZE: 33.9 x 22.3 x 11.3 mmWEIGHT: 7.5gOPERATING VOLTAGE: DC 3.7-7.4VR304SB Specs (optional):T-FHSSSIZE: 35.1 x 23.2 x 8.5mmWEIGHT: 6.6gOPERATING VOLTAGE: DC4.8-7.4VR304SB-E Specs (optional):SIZE: 35.1 x 23.2 x 12.5mmWEIGHT: 7.0gRATED VOLTAGE: DC4.8-7.4VOPERATING VOLTAGE: DC4-8.4VNever use the R304SB-E receiver in GP cars/boats

€299.90*

Average rating of 0 out of 5 stars

2PCKA-AM40 Futaba Megatech Radio control with Servo
Genuine Futaba replacement / option part.Handy pistol-grip system with interference-insensitive FM modulation, ideal for controlling RC cars, especially for 1:5 models that have a gasoline engine with electric or magnetic ignition.The non-slip, rubber-coated knob allows steering movements like in the original car.The turning distance, the middle position and end points of the steering and throttle servo are adjustable. Conveniently positioned controls allow trim and travel to be adjusted on the transmitter even while driving.The pistol trigger allows fast acceleration and sensitive braking. The center position can be selected in a ratio of 7:3 or 5:5 to optimally adjust the trigger for combustion and electric cars. A 3-stage LED display system provides precise information about the current operating voltage of the transmitter at all times.Plug-in crystals that can be easily changed from the outside and a servo reverse function for reversing the servo direction are of course part of the basic equipment of such a system.All switches and controls which are not used during driving are protected under a smoked glass cover on the front of the transmitter.A built-in charging socket allows easy conversion to rechargeable NC battery operation.Functions: ATV steering Servo travel setting separately for throttle and steeringVariable Rate Control travel reduction for steering Neutral trim for steering and throttle Content: Transmitter Megatech Receiver R-122 JE 40 MHz Servo S3003 Battery box - BEC Switch cable with charging battery box BEC Servo accessories

€99.90*

Customers also viewed

Average rating of 0 out of 5 stars

Futaba 4PM-PLUS Transmitter with R304SBS receiver
T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS:In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response. SR system does not support telemetry function. *R304SB and R304SB-E are not compatible with SR system.T-FHSS MINIZ SYSTEM:By changing to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42. Dedicated Kyosho receiver RA-42 requires purchase separately.FHSS MINIZ SYSTEM:By changing to the MI-FH system in the receiver setting menu, you can use Kyosho Mini – Z FH FS-RM005 module to connect to non-Evo Mini-z.TELEMETRY SYSTEM:The T4PM+ transmitter has adopted the newly developed bidirectional communication system “T-FHSS”.2.4 GHZ SS RADIO COMMUNICATION SYSTEM:Frequency channel setting is unnecessary: Channel shifting takes place within the 2.4 GHz band automatically. This system minimizes the interference from other 2.4 GHz systems.MODEL MEMORY FOR 40 MODELS:Model names can use up to 10 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function.4-AXIS JOG BUTTON:The (JOG) button can be operated in 4 directions: up, down, left, and right.ESC-LINK FUNCTION (MC-LINK):This dedicated function allows you set up the Link software so that your T4PM can control variable frequency and other data changes in Futaba speed controllers (ESCs): MC970CR, MC850C, MC851C, MC602C, MC402CR, etc.S.BUS SERVO:This is a special function that allows setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software. In addition to the conventional wired system, it can be set wirelessly in combination with the R334SBS or R334SBS-E.STEERING MIXING:Smooth cornering is possible by independent left and right steering servo setting.BRAKE MIXING FOR LARGE CARS (BRAKE):Brake mixing of the front and rear wheel of 1/5 gas power cars and other large cars can be adjusted independently.GYRO MIXING (GYRO MIX):The sensitivity of Futaba car rate gyros can be adjusted from the T4PM.4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE (4WS):This function can be used with crawlers and other 4WS type vehicles.DUAL ESCS MIXING FOR CRAWLERS CARS (DUAL ESC):ESCs at the front and rear are controlled independently.CPS-1 MIXING (CPS MIX):LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only.ANTI-SKID BRAKING SYSTEM (TH A.B.S):This function applies the brakes so that the tires of gas powered cars, etc. do not lose their grip on the road even when braking at corners.THROTTLE ACCELERATION (ACCEL):Gas power cars have a time lag before the clutch and brakes become effective. The throttle acceleration function reduces this time lag.THROTTLE SPEED (SPEED):Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption.STEERING SPEED (SPEED):When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted.RACING TIMER (TIMER):The lap timer can record 100 lap times and total time. The timer can also be started automatically by trigger operation. The race time and audible alarm can be set. Re-/fueling time are indicated by an audible alarm. An up timer is also provided.FUNCTION SELECT SWITCH (SWITCH)/DIAL FUNCTION (TRIM DIAL):This assigns functions to 2 switches and dials (digital trim, digital dial). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital.TRIGGER POSITION CAN BE CHANGED:The position of the throttle trigger can be moved forward and backward.TENSION ADJUSTMENT FUNCTION:The tension of the steering wheel and throttle trigger springs can be adjusted from the outside.MECHANICAL ATL ADJUSTMENT:Make this adjustment when you want to decrease the total travel of the brake (push) side of the throttle trigger.YOUR T4PM-PLUS INCLUDES THE FOLLOWING COMPONENTS:T4PM-Plus TransmitterR304SBS ReceiverDry Battery HolderMini ScrewdriverTRANSMITTER SPECS:T-FHSS SR/T-FHSS/S-FHSS SYSTEM, WHEEL TYPE, 4 CHANNELSCOMMUNICATION METHOD: Bidirectional protocolMAXIMUM OPERATING RANGE: 100m (Except the MINIT system) (Optimum condition)FOR SAFETY: F/S, B-F/S, IDTRANSMITTER FREQUENCY: 2.4GHz bandRF POWER OUTPUT: 100mW EIRPPOWER REQUIREMENT: (Dry Cell Battery) Penlight x 3 (4.5 V)CURRENT DRAIN: 150mA or lessTRANSMISSION ANTENNA: 1/2λ di-poleR304SBS Specs:T-FHSS SRSIZE: 33.9 x 22.3 x 11.3 mmWEIGHT: 7.5gOPERATING VOLTAGE: DC 3.7-7.4VR304SB Specs (optional):T-FHSSSIZE: 35.1 x 23.2 x 8.5mmWEIGHT: 6.6gOPERATING VOLTAGE: DC4.8-7.4VR304SB-E Specs (optional):SIZE: 35.1 x 23.2 x 12.5mmWEIGHT: 7.0gRATED VOLTAGE: DC4.8-7.4VOPERATING VOLTAGE: DC4-8.4VNever use the R304SB-E receiver in GP cars/boats

€299.90*

Average rating of 0 out of 5 stars

SPMR5025 Spektrum DX5 Pro 5-Kanal DSMR
Original Spektrum Ersatz-/Tuningteil.Now ready to support the connectivity advantages of Smart Technology out of the box, the Spektrum DX5 Pro 2021 DSMR® also includes design and ergonomic improvements to give racers, bashers and boaters top-of-the-line features at an affordable price. Key Features Smart Technology compatible out of the box Five fully proportional channels Multiple mixing setups including Motor on Axle (MOA) Upgraded RF Module for stronger signal and improved output power 5.5-Millisecond frame rate with compatible receivers If you're a racer, basher or boater who's looking for an affordable radio with a "custom" feel and next-generation capabilities, look no further than the Spektrum lineup's new top-of-the-line surface transmitter: the 5-channel DX5 Pro 2021. Funktionen Smart Technology compatible out of the box Upgraded RF Module for stronger signal and improved output power Five fully proportional channels Generous ergonomic options for tailoring the transmitter to your feel Multiple mixing setups including Motor on Axle (MOA) DSMR® 2.4GHz technology (backwards compatible with DSM2®) 5.5-Millisecond frame rate with compatible receivers Advanced programming features, made easy to use with SimpleScroll interface Built-in telemetry Programmable vibe alerts 250-Model memory LiPo battery compatible (battery not included) Available as transmitter only or matched with an SR2100 DSMR® receiver, the DX5 Pro 2021 delivers the performance and comfort of a pro-class radio at a price that won't break your hobby budget. Its improved ergonomics, connectivity and programmability are ready to take your control to the next level. OUT-OF-THE-BOX SMART CONNECTIVITY The Spektrum DX5 Pro 2021 is ready right out-of-the-box to support the innovative connectivity of Spektrum Smart Technology. With a Spektrum Firma Smart ESC and Smart battery in your model, you'll have real-time telemetry data available at your fingertips to keep you aware of every component's status and to boost your confidence in its capabilities. Smart Technology ensures that all of your model's electronics work together seamlessly for the greatest efficiency and performance. It makes your entire system more responsive and simpler to use. IMPROVED SIGNAL QUALITY The DX5 Pro 2021 features Spektrum's latest RF module, engineered around DSMR® 2.4GHz technology. This generates a stronger and more robust signal, increases the telemetry range, and creates an extremely reliable connection between the transmitter and receiver. When paired with a receiver capable of 5.5ms frame rates, such as the SR2100, the DX5 Pro 2021 delivers lightning-fast response that gives new meaning to the word "connected". PRECISE STEERING WHEEL MECHANISM The ergonomically designed DX5 transmitter has a feel that any driver can appreciate. Its overall low weight minimizes fatigue, while the non-slip rubber grip and trigger-throttle action deliver precise control that feels perfectly natural. To these, the updated DX5 Pro 2021 transmitter adds a new steering wheel mechanism that increases the accuracy and precision of steering motion. UPDATED TRIM TABS Among the many ergonomic options available for tailoring the DX5 Pro 2021 transmitter to your personal touch are updated trim tabs, designed to make their operation easier while you drive your vehicle. ADVANCED PROGRAMMABILITY The DX5 Pro 2021 offers an impressive number of programming features and they're easy for anyone to use, thanks to the SimpleScroll programming interface that makes navigating menus and changing settings as simple as "scroll and click". You can program up to five drive modes per model to help dial in the perfect drag racing and lap times. Drive modes can also be used to program compatible AVC® (Active Vehicle Control) receivers to match your skill level, driving style, and terrain to provide predictable handling at every speed. There are multiple mixing setups, including Motor-On-Axle (MOA), plus ABS, Traction Control and 4-wheel steering, dual rates, expo and more. PROGRAMMING VIBE ALERTS You can select from a variety of vibe alerts for timer alarms, low battery voltage and other telemetry functions. Most of these can be set to go off when the voltage level or telemetry data exceeds specific values that you can easily define in the telemetry menus. Contents:1 piece

€369.99*

Average rating of 0 out of 5 stars

2PCKA-AM40 Futaba Megatech Radio control with Servo
Genuine Futaba replacement / option part.Handy pistol-grip system with interference-insensitive FM modulation, ideal for controlling RC cars, especially for 1:5 models that have a gasoline engine with electric or magnetic ignition.The non-slip, rubber-coated knob allows steering movements like in the original car.The turning distance, the middle position and end points of the steering and throttle servo are adjustable. Conveniently positioned controls allow trim and travel to be adjusted on the transmitter even while driving.The pistol trigger allows fast acceleration and sensitive braking. The center position can be selected in a ratio of 7:3 or 5:5 to optimally adjust the trigger for combustion and electric cars. A 3-stage LED display system provides precise information about the current operating voltage of the transmitter at all times.Plug-in crystals that can be easily changed from the outside and a servo reverse function for reversing the servo direction are of course part of the basic equipment of such a system.All switches and controls which are not used during driving are protected under a smoked glass cover on the front of the transmitter.A built-in charging socket allows easy conversion to rechargeable NC battery operation.Functions: ATV steering Servo travel setting separately for throttle and steeringVariable Rate Control travel reduction for steering Neutral trim for steering and throttle Content: Transmitter Megatech Receiver R-122 JE 40 MHz Servo S3003 Battery box - BEC Switch cable with charging battery box BEC Servo accessories

€99.90*

Average rating of 0 out of 5 stars

y1608 SPEED TEC CRANK Team-Edition Zenoah G320 7-port Tuning engine
The SPEED TEC CRANK genuine Zenoah engine is optimized for performance by hand with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC Team Edition version modifications: Cylinder & case:Adjustment of compression; enlarged ports, fuel management milled, machined and polished exhaust, intake is flow-optimized the case is specially matched with enlarged and flow-optimized cross section towards the ports Crankshaft:is adjusted, aligned and balancedFlywheel and ignition:Latest SPEED TEC CRANK SV ignition system for rc-car race engines with air baffles, a special balanced 62 mm diameter flywheel, modified ignition coil mount and special ignition system allows for the extremely fast revving of the SPEED TEC team edition engine and guarantees a significantly improved performance.The machined and more than 30% lighter than stock CRANK flywheel with fins on both sides contributes to the optimized engine cooling.Gaskets:Premium quality gaskets installed.Isolator:Special matched and raised insulator Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€1,099.00*

Average rating of 0 out of 5 stars

FG Challenge Line 2WD-530 Porsche 962C with 26 cm³ FG engine
With this robust and reliable FG chassis, which is equipped with a powerful 26 cm³ combustion engine, you get the ideal entry into the fascinating "royal class" of large scale RC models as well as into the competition.The model has a 530 wheelbase. The models are built on a 4 mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in.Further equipment points are differential gear, 24 teeth steel pinion, oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings.The remote control, the two servos and the receiver battery (RTR set!) are required to operate the FG model. This RTR equipment is available in our shop selection for an additional fee.The body shell is clear, but also available in a painted version in our shop selection for an additional fee.Thanks to the numerous available option parts, you can upgrade your FG Challenge Line as required.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 945 mmWidth: 390 mmHeight: 215 mmWheelbase: 530 mm

From €899.90*
%

Average rating of 0 out of 5 stars

Losi 5ive-T 2.0 V2 1/5 4WD SCT Gas BND, HT-Edition
Includes HT-Edition parts set worth over 150.- , consisting of:: TT1000 Top Tuning Electronic 20 Amp Bigscale high voltage 30 Volt switch TT1000 Top Tuning Electronic 20 Amp Bigscale high voltage 30 y0558 HT Car Bag XXL for Losi 5ive-T/2.0, Mini 5ive WRC, Desert Buggy XL and many more   y0558 HT Car Bag XXL für Losi y1312 Twin hose bracket 3 pieces y1312 Twin hose bracket When the original 5IVE-T was introduced the world of 1/5-scale off-road racing changed, and this iconic platform became one of the most successful and influential platforms to date. Now get ready for 2.0! The Losi 5IVE-T 2.0 BND: 1/5 4WD Gas Short Course Truck has all of the unrivaled performance of its predecessor and includes Bind-N-Drive technology, allowing you to pick the transmitter that best fits your lifestyle. The powerful Zenoah G320 32cc engine has been built specifically for the 5IVE-T 2.0.The revised chassis layout reduces the front drive shaft angle for improved durability and increased 4WD balance. Plus, the new rack style bellcrank steering assembly makes for easy Ackermann changes and overall improved steering geometry. Additional advances include an updated front hood, upgraded brakes, and hard anodized bleeder caps and shock bodies for improved shock performance. All this ensures the 5IVE-T 2.0 continues to reign supreme.Key FeaturesGenuine Zenoah G320 32cc engineInnovative Bind-N-DriveSpektrum SR6000T telemetry-ready receiverImproved bar style steering rack with adjustable AckermannImproved center differential orientationImproved drive line angleHeavy-duty brakesInnovative clutch mount with gear mesh braceTough steering and gas/throttle servo braceExtra-large 800cc capacity fuel tank What's in the Box?Losi 5IVE-T® 2.0 BND 4WD SCTSpektrum 6200A DSMR 6-Ch AVC Telemetrie receiverZenoah 32cc Gasoline Pull-Start EngineS900S 1/5 Scale Metal Gear Steering ServoS901T 1/5 Scale Metal Gear Throttle ServoWheel WrenchRod End/Shock End toolMulti WrenchSpark Plug WrenchBind PlugExhaust Gasket2.0mm, 2.5mm, 3.0mm, 4.0mm Allen WrenchesProduct Manual Dimensions Height: 181 mm Length: 965 mm Width: 520 mm Weight: 17 kg Needed to CompleteAppropriate Charger like DYNC0505WTransmitter / receiver eg: DX2E or serial receiver compatible e.g: DX6R87-92 Octane Gasoline2-Cycle Motul Oil e.g: y0813/02Gas can e.g: y0686Contents:1 piece

From €1,899.00*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency