Futaba 4PM-PLUS Transmitter with R304SBS receiver
Product information "Futaba 4PM-PLUS Transmitter with R304SBS receiver"
T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS:
In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response. SR system does not support telemetry function. *R304SB and R304SB-E are not compatible with SR system.
T-FHSS MINIZ SYSTEM:
By changing to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42. Dedicated Kyosho receiver RA-42 requires purchase separately.
FHSS MINIZ SYSTEM:
TELEMETRY SYSTEM:
The T4PM+ transmitter has adopted the newly developed bidirectional communication system “T-FHSS”.
2.4 GHZ SS RADIO COMMUNICATION SYSTEM:
Frequency channel setting is unnecessary: Channel shifting takes place within the 2.4 GHz band automatically. This system minimizes the interference from other 2.4 GHz systems.
MODEL MEMORY FOR 40 MODELS:
Model names can use up to 10 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function.
4-AXIS JOG BUTTON:
The (JOG) button can be operated in 4 directions: up, down, left, and right.
ESC-LINK FUNCTION (MC-LINK):
This dedicated function allows you set up the Link software so that your T4PM can control variable frequency and other data changes in Futaba speed controllers (ESCs): MC970CR, MC850C, MC851C, MC602C, MC402CR, etc.
S.BUS SERVO:
This is a special function that allows setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software. In addition to the conventional wired system, it can be set wirelessly in combination with the R334SBS or R334SBS-E.
STEERING MIXING:
Smooth cornering is possible by independent left and right steering servo setting.
BRAKE MIXING FOR LARGE CARS (BRAKE):
Brake mixing of the front and rear wheel of 1/5 gas power cars and other large cars can be adjusted independently.
GYRO MIXING (GYRO MIX):
The sensitivity of Futaba car rate gyros can be adjusted from the T4PM.
4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE (4WS):
This function can be used with crawlers and other 4WS type vehicles.
DUAL ESCS MIXING FOR CRAWLERS CARS (DUAL ESC):
ESCs at the front and rear are controlled independently.
CPS-1 MIXING (CPS MIX):
LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only.
ANTI-SKID BRAKING SYSTEM (TH A.B.S):
This function applies the brakes so that the tires of gas powered cars, etc. do not lose their grip on the road even when braking at corners.
THROTTLE ACCELERATION (ACCEL):
Gas power cars have a time lag before the clutch and brakes become effective. The throttle acceleration function reduces this time lag.
THROTTLE SPEED (SPEED):
Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption.
STEERING SPEED (SPEED):
When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted.
RACING TIMER (TIMER):
The lap timer can record 100 lap times and total time. The timer can also be started automatically by trigger operation. The race time and audible alarm can be set. Re-/fueling time are indicated by an audible alarm. An up timer is also provided.
FUNCTION SELECT SWITCH (SWITCH)/DIAL FUNCTION (TRIM DIAL):
This assigns functions to 2 switches and dials (digital trim, digital dial). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital.
TRIGGER POSITION CAN BE CHANGED:
The position of the throttle trigger can be moved forward and backward.
TENSION ADJUSTMENT FUNCTION:
The tension of the steering wheel and throttle trigger springs can be adjusted from the outside.
MECHANICAL ATL ADJUSTMENT:
Make this adjustment when you want to decrease the total travel of the brake (push) side of the throttle trigger.
YOUR T4PM-PLUS INCLUDES THE FOLLOWING COMPONENTS:
TRANSMITTER SPECS:
R304SBS Specs:
R304SB Specs (optional):
R304SB-E Specs (optional):
In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response. SR system does not support telemetry function. *R304SB and R304SB-E are not compatible with SR system.
T-FHSS MINIZ SYSTEM:
By changing to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42. Dedicated Kyosho receiver RA-42 requires purchase separately.
FHSS MINIZ SYSTEM:
By
changing to the MI-FH system in the receiver setting menu, you can use
Kyosho Mini – Z FH FS-RM005 module to connect to non-Evo Mini-z.
TELEMETRY SYSTEM:
The T4PM+ transmitter has adopted the newly developed bidirectional communication system “T-FHSS”.
2.4 GHZ SS RADIO COMMUNICATION SYSTEM:
Frequency channel setting is unnecessary: Channel shifting takes place within the 2.4 GHz band automatically. This system minimizes the interference from other 2.4 GHz systems.
MODEL MEMORY FOR 40 MODELS:
Model names can use up to 10 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function.
4-AXIS JOG BUTTON:
The (JOG) button can be operated in 4 directions: up, down, left, and right.
ESC-LINK FUNCTION (MC-LINK):
This dedicated function allows you set up the Link software so that your T4PM can control variable frequency and other data changes in Futaba speed controllers (ESCs): MC970CR, MC850C, MC851C, MC602C, MC402CR, etc.
S.BUS SERVO:
This is a special function that allows setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software. In addition to the conventional wired system, it can be set wirelessly in combination with the R334SBS or R334SBS-E.
STEERING MIXING:
Smooth cornering is possible by independent left and right steering servo setting.
BRAKE MIXING FOR LARGE CARS (BRAKE):
Brake mixing of the front and rear wheel of 1/5 gas power cars and other large cars can be adjusted independently.
GYRO MIXING (GYRO MIX):
The sensitivity of Futaba car rate gyros can be adjusted from the T4PM.
4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE (4WS):
This function can be used with crawlers and other 4WS type vehicles.
DUAL ESCS MIXING FOR CRAWLERS CARS (DUAL ESC):
ESCs at the front and rear are controlled independently.
CPS-1 MIXING (CPS MIX):
LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only.
ANTI-SKID BRAKING SYSTEM (TH A.B.S):
This function applies the brakes so that the tires of gas powered cars, etc. do not lose their grip on the road even when braking at corners.
THROTTLE ACCELERATION (ACCEL):
Gas power cars have a time lag before the clutch and brakes become effective. The throttle acceleration function reduces this time lag.
THROTTLE SPEED (SPEED):
Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption.
STEERING SPEED (SPEED):
When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted.
RACING TIMER (TIMER):
The lap timer can record 100 lap times and total time. The timer can also be started automatically by trigger operation. The race time and audible alarm can be set. Re-/fueling time are indicated by an audible alarm. An up timer is also provided.
FUNCTION SELECT SWITCH (SWITCH)/DIAL FUNCTION (TRIM DIAL):
This assigns functions to 2 switches and dials (digital trim, digital dial). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital.
TRIGGER POSITION CAN BE CHANGED:
The position of the throttle trigger can be moved forward and backward.
TENSION ADJUSTMENT FUNCTION:
The tension of the steering wheel and throttle trigger springs can be adjusted from the outside.
MECHANICAL ATL ADJUSTMENT:
Make this adjustment when you want to decrease the total travel of the brake (push) side of the throttle trigger.
YOUR T4PM-PLUS INCLUDES THE FOLLOWING COMPONENTS:
- T4PM-Plus Transmitter
- R304SBS Receiver
- Dry Battery Holder
- Mini Screwdriver
TRANSMITTER SPECS:
- T-FHSS SR/T-FHSS/S-FHSS SYSTEM, WHEEL TYPE, 4 CHANNELS
- COMMUNICATION METHOD: Bidirectional protocol
- MAXIMUM OPERATING RANGE: 100m (Except the MINIT system) (Optimum condition)
- FOR SAFETY: F/S, B-F/S, ID
- TRANSMITTER FREQUENCY: 2.4GHz band
- RF POWER OUTPUT: 100mW EIRP
- POWER REQUIREMENT: (Dry Cell Battery) Penlight x 3 (4.5 V)
- CURRENT DRAIN: 150mA or less
- TRANSMISSION ANTENNA: 1/2λ di-pole
R304SBS Specs:
- T-FHSS SR
- SIZE: 33.9 x 22.3 x 11.3 mm
- WEIGHT: 7.5g
- OPERATING VOLTAGE: DC 3.7-7.4V
R304SB Specs (optional):
- T-FHSS
- SIZE: 35.1 x 23.2 x 8.5mm
- WEIGHT: 6.6g
- OPERATING VOLTAGE: DC4.8-7.4V
R304SB-E Specs (optional):
- SIZE: 35.1 x 23.2 x 12.5mm
- WEIGHT: 7.0g
- RATED VOLTAGE: DC4.8-7.4V
- OPERATING VOLTAGE: DC4-8.4V
Responsible company
Minicars Hobby Distribution AB
Annelundsgatan 17
74940 Enköping
Sweden
Annelundsgatan 17
74940 Enköping
Sweden
Login
Customers also bought
y0711_alle Version:
y0711/01 Single-sided split alloy servoarm
Splitted Alloy servoarm for a more protecting screw connection (with a 2,0 mm allen head screw driver) causing stiffness on the servo output shaftSuitable for all servos with an output shaft with 15 tooth spline shaft, for example:K-Power DM4000Multiplex RhinoHitec 805Savöx SV-0236MGSpektrum S9010 and S9020LOSB 0886 S901T (Original Losi 5ive-T throttle Servo servo)LOSB 0884 S900S (Original Losi 5ive-T steering servo)Losi SPMS904 WPand many more!holes for linkage with M3 threadWhen you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.Content:1 pieces
Variants from €17.80*
akku_0018 Version:
y0415/01 Futaba/universal+ 2.4EUR
Genuine HT spare/option part.Charging cable for receiver batteries.Content:1 piece
Genuine FG spare/option part. Dimensions:Length: 123 mmWidth: 246 mmHeight: 37 mmContents:1 piece
LiPo batteries with Spektrum Smart technology practically take care of themselves. When combined with a Spektrum Smart Battery Charger, the unique parameters, history of the battery and more are all available the instant its connected. Charging a Smart Battery is easy as it gets, plus Smart LiPo battery packs are programmable to meet your exact charging needs. But the crowning feature of a Spektrum Smart LiPo battery is that it can be programmed to safely self-discharge to storage condition. Thats a Smart Battery pack!Spektrum Smart technology is about offering a higher connection to your hobby. Its a connection that puts you in complete control, makes you more aware and more confident about the capability of your equipmentall the while making your hobby easier. The combined result will make you wish everything about your hobby was smarter. Spektrum Smart LiPo Batteries are a part of a wide series of Smart technology products now available.Feature OverviewYoull never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger Start button. Smart technology takes care of the rest.Every Smart LiPo battery is factory assembled with the next-generation IC3 or IC5 output connector thats conveniently compatible with older devices equipped with robust EC3 and EC5 connectors. You can use Smart Batteries with older systems, but only when connected to a Spektrum Smart device will all the benefits of Smart technology become obvious.Spektrum Smart LiPo Batteries Store Unique Data, such as:Battery BrandBattery TypeBattery CapacityBattery C RatingIndividual Cell VoltageBattery TemperatureCharge/Discharge CyclesSpektrum Smart LiPo batteries also maintain an error log including the number of over-heat, over-discharge and over-charge incidents which can be helpful data in assuring that the battery youve chosen is right for the application. A Smart Battery uploads its charge parameters to a Spektrum Smart Charger automatically making charging as simple as pressing the Start button. The charge rate of every Smart Battery is customizable, allowing you to take full advantage of packs with faster charge ratings.Specification:Application: SurfaceBattery Type: Smart LiPoBattery Voltage: 7.4VCapacity: 4000 mAhConnector Type: IC3Height: 1.2 in. (30mm)Length: 3.5 in. (90mm)Number of Cells: 3Weight: 170gWidth: 1.3 in. (34mm)Contents:1 piece
Customers also viewed
The T10PXR is a 10-channel 2.4GHz computer radio control system with F-4G,T-FHSS SR / T-FHSS / S-FHSS and MiniZ modulation modes. The transmitter convinces with new design, new keypad and high quality carbon elements. New additions are some new buttons, 2- and 3-position switches and a rocker switch at the base of the transmitter.The Futaba T10PX comes with many new features that make the new RC-car radio flagship a very flexible transmitter.With 10 channels and many configuration options, the possible uses go far beyond those of a conventional car radio.From racer and drifter to crawler and boat to complex function models, everything is possible.Overview of the modulation types: F-4G, 10 channels / telemetry T-FHSS-SR, 4 channels T-FHSS, 4 channels / telemetry li> S-FHSS, 7 channels The new F-4G transmission protocol has been further improved compared to T-FHSS SR. Latency has been significantly reduced again and the range extended. At the same time, the receivers have become smaller.The optical center of the T10PX is the backlit 4.3 inch TFT color touch display with brilliant colors and high sharpness. Even in direct sunlight, all values on the display can be read excellently. The graphic user interface with the well-known easy to use Futaba menu structure, ensures easy operation. Navigation is intuitive via the screen and the additional buttons on the top of the transmitter.TELEMETRYSynchronized, bi-directional communication between transmitter and receiver with high telemetry data rate (up to 9 times per second), without loss of control channel response. Maximum of 31 telemetry sensors, alarm tone setting and output via beeper, vibration alert or voice output via internal speaker or optional headphones/active speaker. Telemetry data recording on SD card (SDHC) Telemetry data analysis via spreadsheet programs or LogView software Real-time display of telemetry data on integrated display Receiver signal strength indicator for monitoring the range Receiver undervoltage warning system for monitoring of the receiver battery Connection of up to 31 sensors to the S.BUS2 input S.BUS-TECHNOLOGY Connection option for S.BUS2 sensors All S.BUS servos can also be connected to normal servo outputs of the receiver Digital BUS technology for model sports Allows ideal placement of all components with efficient wire routing Future-proof, digital technology for all future Futaba components Features: Color LCD Touch Screen 4.3 Inch F4G System & Telemetry S-FHSS & T-FHSS Super Response (SR) Mode MiniZ S-FHSS 10 channels 40 models memory additional 3- and 2-step switches Brake mixer for large scale cars 4-wheel steering mixer Dual ESC mixer Mixer for track drives CPS LED mixer Gyro adjustment via T10PX microSD Slot (Data Log / Update) USB port Content of delivery Transmitter T10PX Receiver 404SBS Instruction manual DE/UK Accessories
Genuine Futaba replacement / option part.Handy pistol-grip system with interference-insensitive FM modulation, ideal for controlling RC cars, especially for 1:5 models that have a gasoline engine with electric or magnetic ignition.The non-slip, rubber-coated knob allows steering movements like in the original car.The turning distance, the middle position and end points of the steering and throttle servo are adjustable. Conveniently positioned controls allow trim and travel to be adjusted on the transmitter even while driving.The pistol trigger allows fast acceleration and sensitive braking. The center position can be selected in a ratio of 7:3 or 5:5 to optimally adjust the trigger for combustion and electric cars. A 3-stage LED display system provides precise information about the current operating voltage of the transmitter at all times.Plug-in crystals that can be easily changed from the outside and a servo reverse function for reversing the servo direction are of course part of the basic equipment of such a system.All switches and controls which are not used during driving are protected under a smoked glass cover on the front of the transmitter.A built-in charging socket allows easy conversion to rechargeable NC battery operation.Functions: ATV steering Servo travel setting separately for throttle and steeringVariable Rate Control travel reduction for steering Neutral trim for steering and throttle Content: Transmitter Megatech Receiver R-122 JE 40 MHz Servo S3003 Battery box - BEC Switch cable with charging battery box BEC Servo accessories
Original Spektrum Ersatz-/Tuningteil.Now ready to support the connectivity advantages of Smart Technology out of the box, the Spektrum DX5 Pro 2021 DSMR® also includes design and ergonomic improvements to give racers, bashers and boaters top-of-the-line features at an affordable price. Key Features Smart Technology compatible out of the box Five fully proportional channels Multiple mixing setups including Motor on Axle (MOA) Upgraded RF Module for stronger signal and improved output power 5.5-Millisecond frame rate with compatible receivers If you're a racer, basher or boater who's looking for an affordable radio with a "custom" feel and next-generation capabilities, look no further than the Spektrum lineup's new top-of-the-line surface transmitter: the 5-channel DX5 Pro 2021. Funktionen Smart Technology compatible out of the box Upgraded RF Module for stronger signal and improved output power Five fully proportional channels Generous ergonomic options for tailoring the transmitter to your feel Multiple mixing setups including Motor on Axle (MOA) DSMR® 2.4GHz technology (backwards compatible with DSM2®) 5.5-Millisecond frame rate with compatible receivers Advanced programming features, made easy to use with SimpleScroll interface Built-in telemetry Programmable vibe alerts 250-Model memory LiPo battery compatible (battery not included) Available as transmitter only or matched with an SR2100 DSMR® receiver, the DX5 Pro 2021 delivers the performance and comfort of a pro-class radio at a price that won't break your hobby budget. Its improved ergonomics, connectivity and programmability are ready to take your control to the next level. OUT-OF-THE-BOX SMART CONNECTIVITY The Spektrum DX5 Pro 2021 is ready right out-of-the-box to support the innovative connectivity of Spektrum Smart Technology. With a Spektrum Firma Smart ESC and Smart battery in your model, you'll have real-time telemetry data available at your fingertips to keep you aware of every component's status and to boost your confidence in its capabilities. Smart Technology ensures that all of your model's electronics work together seamlessly for the greatest efficiency and performance. It makes your entire system more responsive and simpler to use. IMPROVED SIGNAL QUALITY The DX5 Pro 2021 features Spektrum's latest RF module, engineered around DSMR® 2.4GHz technology. This generates a stronger and more robust signal, increases the telemetry range, and creates an extremely reliable connection between the transmitter and receiver. When paired with a receiver capable of 5.5ms frame rates, such as the SR2100, the DX5 Pro 2021 delivers lightning-fast response that gives new meaning to the word "connected". PRECISE STEERING WHEEL MECHANISM The ergonomically designed DX5 transmitter has a feel that any driver can appreciate. Its overall low weight minimizes fatigue, while the non-slip rubber grip and trigger-throttle action deliver precise control that feels perfectly natural. To these, the updated DX5 Pro 2021 transmitter adds a new steering wheel mechanism that increases the accuracy and precision of steering motion. UPDATED TRIM TABS Among the many ergonomic options available for tailoring the DX5 Pro 2021 transmitter to your personal touch are updated trim tabs, designed to make their operation easier while you drive your vehicle. ADVANCED PROGRAMMABILITY The DX5 Pro 2021 offers an impressive number of programming features and they're easy for anyone to use, thanks to the SimpleScroll programming interface that makes navigating menus and changing settings as simple as "scroll and click". You can program up to five drive modes per model to help dial in the perfect drag racing and lap times. Drive modes can also be used to program compatible AVC® (Active Vehicle Control) receivers to match your skill level, driving style, and terrain to provide predictable handling at every speed. There are multiple mixing setups, including Motor-On-Axle (MOA), plus ABS, Traction Control and 4-wheel steering, dual rates, expo and more. PROGRAMMING VIBE ALERTS You can select from a variety of vibe alerts for timer alarms, low battery voltage and other telemetry functions. Most of these can be set to go off when the voltage level or telemetry data exceeds specific values that you can easily define in the telemetry menus. Contents:1 piece
Competition-OnRoad RC car with the latest technical developments. Unique among the large scale models. New stabilizer bar construction front and rear. Ball stabiliszers or frame stabilizers can be used (accessories). 10 mm thick chassis made of T7075 aluminium with cut-outs for weights (also under the tank) and grooves in the front area. This allows the vehicle to be perfectly adapted to the track or the driver. The engine is now again bolted to the chassis for more stiffness. Optimally designed wishbones on front and rear suspension. Reinforced and with toe-in adjustability, which is performed via aluminum wedges. Front upper wishbone for more adjustment possibilities. All gears with fine pitch.Since 1997, i.e. since the beginning of the 1:5 RC car scene, FG Modellsport has been represented with team drivers worldwide at national and international competitions. With the Competition-EVO series, FG won most world championships and almost all European championships. Content Top suspension with 10 mm T7075 aluminum chassis plate Zenoah G230RC Engine Adjustable Tuning Clutch Air filter / Airbox Tuned pipe system Front and rear hydraulic brakes Differential Large volume shock absorbers, black anodized Wheels and rims
2-Cell 7.4V 2200mAh LiPo Transmitter BatteryThis is a transmitter only, rechargeable LiPo battery pack that fits some Futaba transmitters and also other radio brands.
Fits Futaba Transmitters:
T4PM
T4PLS
T4GRS
T4PV
T4PX
T6KT7PX
T7XC (tight fit)
T8J
T10JT10PX
T12K
T14SG
T16SZ
T18SZ
FX20
FX36
Make sure the transmitter battery settings are for 2S LiPo with alarm cut-off set to 6.4 volt.
Specs:
Type: LiPo Transmitter Battery
Power Connector: Futaba
Power Wire: 22AWG
Balance Connector: JST-XH
Battery: 2S1P LiPo
Nominal Voltage: 7.4V/2S
Max Charge Voltage: 4.2V/Cell
Mac Charge Current: 2.2A (1C)
Capacity: 2200mAh
Energy: 16Wh
Storage Voltage: 3.7-3.8V/cell
Size:
Length: 73mm
Width: 45mm
Thickness: 15.5mm
Weight: 98g
Tech Notes:
Charge the battery outside the transmitter with a LiPo balance charger equipped with an Futaba adapter lead and XH balancing connector
Set the charger to "LiPo", 2s, 3.7v/cell
Genuine Mecatech spare/option part for the FW01.Content:1 piece
Genuine TopTuning spare/option part.Top quality lockable aluminum transmitter case in Futaba T7PX design. Case has plastic feet on bottom and back.The case lid features a lock on either side of the handle and a ribbed foam insert on the inside.Comes with 2 keys includedOuter dimensions: length approx. 320 mm Width: approx. 240 mm Height: approx. 160 mm Weight: 1.5 kgContents:1 piece