6741 FG Shim ring 6x12x0,5mm - 10pcs.
€3.90
Available
Product information "6741 FG Shim ring 6x12x0,5mm - 10pcs."
Part is delivered in silver or black color from vendor!
Lebacher Strasse 4
66113 Saarbrücken
Germany
Login
Customers also bought
Genuine FG spare/option part.Square wheel driver in high-strength alloy material with M6 fixing thread. Essentially higher retention force. Suitable for all models.Dimensions:14 mm wide18mm squareBore diameter 8 mmContent:2 pieces
Item N° 7431 Steel gearwheel hardened 22 teeth - 1pce.Suitable for 42 teeth main gear wheel.Diameter 35,7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5
Twin hose bracket for hoses up to 7 mm outer diameter. With 5 mm hole for installation by screw or cable tie.Keeps your car's fuel lines in place. Especially helpfull with tuned pipe layouts running close to the engine.Screws with part number #6726/25 are recommended for installation on the fan cover.
Genuine HT spare/option part.Rim reinforcement, transfers the load over a larger diameter into the rim and protects the rim's square. Will also allow for the use of rims with an already damaged square.For FG Monster- and Stadium rims 6232, 6232/01, 6232/03, 6232/04, 6232/05 and 6232/06.14 mm wide square drives must be used.Please note:When installed with new (unused) rims, it may be necessary to modify the rim's square slightly.Contents:2 pieces
Shim rings to compensate the axial play of the shaft, to use as washers a.s.o.Part is delivered in silver or black color from vendor!
Customers also viewed
Genuine FG spare/option part. Suitable for all FG touring cars and GT models. Not for Mercedes C291 and Porsche GT1.Contents:1 set
The alloy housing has an outside thread to adjust the damper spring. The upper alloy shock absorber seal is equipped with a ventilation boring which makes the refilling if the damper easier. Completely new is the lower shock absorber seal with the plastic guiding bushes for the damper piston rod and for an easier chaning of the o-rings. The alloy adjusting ring has a socket for the spring collet and an adjusting mark. The shock absorber 2004 has an diameter of approx. 16mm. Suitable for all damper springs with approx. 17mm inside diameter .With 115 mm hole distance.