The ideal cleaner for pretreatment of Lexan body shells when are to be applied! Decals or detailing kits will stick significantly better to a body shell cleaned with LOCTITE 7063. Also great for removal of "battle scars" from the body shell. But note: The cleaner should not come in contact with the printed surface of the decals!Use to prepare surfaces to be bonded. The product flashes off very quickly and it allows cleaning directly prior to adhesive/sealant application. It is non-corrosive and non toxic.Application:Spray a sufficient amount of product on the surface to be cleaned and wipe while still wet to ensure heavy contamination and excess solvent is removed.Content:400 ml
The Wheelbase of the WB535 version is 60 mm longer. This modification improved the directionally stability as well as further driving qualities significantly. In addition parts of the 4WD Monster models were assembled in order to make a conversion to a 4WD model possible with low efforts. According to the large tires this model can be driven almost everywhere. The 26 cm³ engine provides sufficient power. Driving fun as well as tremendous looks are the prime characteristics of these models.The body shell comes unpainted. A decal set with writings for further decoration is enclosed in the delivery.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Technical description:The undercarriage of the Monster models is built on a 4 mm angled alloy plate. All borings for fixa- tion of the chassis parts at the bottom side are countersunk in order to prevent the screw heads from sticking out. At the front axle you have the possibility to adjust toe-in or toe-out as well as the wheel camber through track rods with right-hand/left-hand thread. The wheel camber of the rear wheels can be adjusted individually through adjusting screws with right-hand/left-hand thread. Four large-volume oil-pressure shock absorbers are mounted at the lower double wishbones of front and rear axle, these are able to absorb larger shocks of jumps to a great extent and care for an optimal road grip. All rotating drive components are supported by ball bearings. Highly stressed steel parts such as rear gearwheels, differential gears and drive components are hardened. Fuel tank and ra- dio control parts are protected through alloy plates at the sides. The body parts are made of coloured or respectively clear polycarbonate. The Monster tires with tire inserts are glued on chrome-plated rims.The models are equipped with a powerful 26 cm³ combustion engine with ready-for-use oiled air fil- ter. The engine runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties.The pictures may display the car with some optional items which are not included, like bed-mounted rollbar, lights, front bumper or mirrors. These items can be added in the drop down menus.The RTR version is delivered with assembled and preset radio control system and rechargeable batteries. To complete the non-RTR version all popular servos and radio control sys- tems are suitable.Dimensions: Length: 780 mm Width: 510 mm Height: 350 mm Wheelbase: 353 mm
Race ported top end set for Zenoah G260 engine.The SPEED TEC EXPERT genuine Zenoah G260 race ported top end set is optimized for performance with sophisticated craftsmanship and when accurately installed - guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC EXPERT version modifications: Cylinder: Adjustment of compressionnlarged portsFuel management milledModified exhaust and intake Piston: Weight reducedSkirt shortenedOil ringsPiston above and below piston ring tapered and piston dome ground The set includes the following items: Performance-optimized cylinder and piston, piston ring, piston pin, piston pin circlips and cylinder gasket.To achieve the optimum performance gain of a SPEED TEC EXPERT top end set, we recommend the use of a tuned pipe ().Each SPEED TEC Tuning cylinder set comes with a small amount of a spec. assembly lube for the installation of piston and piston ring. This spec. lube provides the required lubrication to the engine for the first start and dissolves without residue!
Also available mounted and glued in the options menu.The MCD Astro-Block tires feature 42 rows with a total of 230 approx. 5 x 5 x 5 mm ultra-strong lugs with different shape and orientation providing optimal grip, even on loose surfaces like sand or soil.Due to the extreme stress created by the MCD Astro-Block tire, careful bonding is recommended on reinforced 1/6 rims like FG # 6105/01.The tires come with a molded rigid inserts which transmit the applied force while maintaining the tires shape.The MCD Astro-Block competition tire is particularly suitable for tracks with loose soil and sandy surface. The tread design allows for extremely fast cornering and excellent propulsion on these surfaces.By cutting the tread you can perfectly fine-tune your car with the MCD Astro-Block tires. The partially or nearly complete caps cutting of the outside lugs has a tremendous effect on the cars handling characteristics when cornering grip.In a nut shell: cutting the lugs of MCD Astro-Block tires on the front axle reduces steering and makes your car usually less aggressive (more drivable). In cases of extreme oversteer (i.e. common in high grass etc.) additional cutting of the lugs on the inside shoulder may help to counteract traction rolling.The excellent grip and thereby accumulated strain on the bonding of the MCD Astro-Block tires requires careful control of the bonding after each use.Recommended tire repair kit: y0067.Dimensions:Outer diameter (glued) approx. 155 mmInner diameter (glued) approx. 110 mmWidth approx. 65 mmContent:2 pieces
Variants from €29.90*
€54.90*
This website uses cookies to ensure the best experience possible. More information...