Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

4429/02 FG Steel taper disk 5mm bore

Product information "4429/02 FG Steel taper disk 5mm bore"

Genuine FG spare/option part.

Steel taper disks, 3.5 mm thick, with a higher stiffness compared to alloy taper disks. Installation of these disks allows for larger operation angles of the metal ball joints and rose joints. You need two disks per joint.

Contents:
  • 4 pieces

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

9540/22 FG Gasket
Genuine FG spare/option part. Contents:1 piece

€7.90*

Average rating of 0 out of 5 stars

9540/05 Gasket
Genuine FG spare/option part. Content:1 piece

€7.50*

Average rating of 0 out of 5 stars

9540/19 Spacer
Genuine FG spare/option part. Content:1 piece

€7.90*

Average rating of 0 out of 5 stars

4429 FG Steel balljoint
Genuine FG spare/option part. Steel ball-and-socket-joint with 5mm bore in the ball and M6 right-handed thread for use with the wishbones. For the installation are needed the adjusting screws 4430 or 4431. The delivery contains all needed pin disks. Dimensions:A = 5 mmB = M6C = 8 mmD = 15.5 mmE = 37 mmContents:2 pieces

€42.30*

Similar products

Average rating of 0 out of 5 stars

y1036 HT rose joints with conical spacers
Genuine HT spare/option part. Dimensions:A = 5 mmB = 6 mmC = 8 mmD = 13 mmContents:2 pieces rose joints4 pieces conical spacers

€18.90*

Average rating of 0 out of 5 stars

4466 FG Rose joint for alloy wishbone
Suitable for , , , , , , , , , , and Elcon Monster-Truck front axle.A = 5 mmB = 6 mmC = 8 mmD = 13 mmContent:2 pieces

€49.50*

Customers also viewed

Average rating of 0 out of 5 stars

4495 FG Alloy servo saver B
Genuine FG spare/option part. CNC-machined from high grade aluminum to close tolerances this rigid part features three sets of mounting holes for the steering rods.Suitable for all FG models.Contents:1 piece

€19.40*

Average rating of 0 out of 5 stars

4472/03 FG Hexagon nut M8 right
Genuine FG spare/option part.Counternut for track rod, 3,8 mm thick.Part is delivered in silver or black color from vendor!Contents:2 pieces

€3.20*

Average rating of 0 out of 5 stars

6155 FG Marder body shell Zenoah white
Genuine FG spare/option part. The FG Marder body shell is delivered white and without window gitter or decal set.Dimensions:Length: 580 mmWidth: 240 mmHeight: 205 mmContents:1 piece

€114.99*

Average rating of 0 out of 5 stars

7497/01 FG Rear brake 2WD/4WD
Genuine FG spare/option part. The set will shipped without gear carrier plate. Contents:1 set

€53.90*

Average rating of 0 out of 5 stars

y6107 Wheel squares 18 mm HART-COAT, 9,5 mm wide
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)9,5 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 9,5 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€14.95*

Average rating of 0 out of 5 stars

y0529 Steel ball joint 6 mm r/h or l/h thread, 4 mm bore in ball
y0529 Version: y0529L One piece left hand thread+ 1EUR
Steel ball joint 6 mm r/h or l/h thread, 4 mm bore in ball, for steering rods and other applications.This version is for steering rod applications.Sets available:One each with r/h and l/h threadOne x r/h threadOne x l/h thread Please note:We recommend using a nut 4472/03 for locking the r/h thread ball joint to prevent the linkage from loss of adjustment.

Variants from €5.90*
€6.90*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Agency