30 products found for "fg_10080"

rc-car-online - Home

10080 FG Engine mount small for F1 - 1pce.

Suitable for Formula 1.

€12.90*

10082 FG Engine carrier - 1pce.

Suitable for Formula 1.

€18.90*

10087 FG Upper damper mount for F1 - 2pcs.

Spare part for .

€3.10*

10084 FG Formula 1 tank mount for Zenoah tank

Genuine FG spare/option part. Tank holder for Formula 1, Porsche GT2 and GT3 for Zenoah tank. Also suitable for other makes. Vertical tank.Contents:1 set

€13.90*

10086 FG Shock absorber housing for F1

Genuine FG spare/option part.Spare part for 10091.Contents:1 piece

€18.90*

10081 FG Engine support - 1pce.

Suitable for Formula 1.

€5.90*

10083 FG Spacer SW10 - 2pcs.

Suitable for Formula 1.

€10.50*

10085 FG Damper mount pin - 2pcs.

Fits formula 1 cars only.

€10.90*

10088 FG Lower damper mount for F1 - 2pcs.

Spare part for and .

€3.70*

10050 FG Clutch gilmer belt pulley 18 teeth - 1pce.

Fits formula 1 cars only.

€27.90*

10060 FG Gilmer belt 150x20mm

Genuine FG spare/option part.Fits formula 1 cars only.Contents:1 piece

€27.90*

10480 FG Stabilizer F1 front/rear

Genuine FG spare/option part.Continously adjustable stabilizer for front and rear axle. Suitable for Formula 1 Sportsline chassis.Contents:1 set

€59.90*

10180 FG Damper spring set F1

Genuine FG spare/option part.The contains two each of the following springs: 10181 FG Damper spring for F1 2,2 mm orange10182 FG Damper spring for F1 2,3 mm yellowSuitable for Formula 1.Dimensions:Length: 48 mmInner diameter: 17 mmContents:4 pieces

€27.90*

10020 FG Brake rods-set for F1 300 mm

Suitable for Formula 1.Length: 300 mm

€7.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

10030 FG Front axle carrier

Genuine FG spare/option part.Suitable for Formula 1.Contents:1 piece

€19.90*

10008 FG Formula 1 Competition 1/5

This model is fitted with numerous aluminium parts: front and rear side bulkheads, rockers, engine mount, suspension arm ends...Steel made Uniball sockets all possible enable all adjustments of the front and rear suspensions.The transmission made with a gearwheell drive offers outstanding reliability and smooth operation.Just like all other FG Competition models the FG Formula 1 Competition is the most successful model of the past years. The experiences we gained from numerous competitions have all influenced this version. The FG gearwheel drive which is extremely smooth running and cares for more power reserves. Surely FG Modellsport has created a competitive model for the next years with this version which will seamlessly follow up on the past successes. Highlights Alloy wishbones FG gearwheel drive Alloy rear axle plate FG alloy shock absorbers 04 Ball-bearing alloy servo saver 26 ccm Zenoah-Engine Airbox Tuned pipe Front- and rear brake 5 mm Chassis Lexan body shell Technical description of the FG Formula 1 Competition ki:The undercarriage of the FG Formula 1 Competition is built on an 5mm alloy chassis. All screws at the bottom of the chassis are countersunk.Front and rear axle mounts as well as the engine unit are connected over the complete length of the chassis, therefore we achieved almost the stiffness of a monocoque chassis. The quick fix system of the engine makes a fast changing of the engine possible. The drive to the rear axle is carried out over several easy-running front gearwheels and an FG ball drive at the rear axle. A separate flange bearing holds the clutch bell in order to relieve the crankshaft. Front and rear axle with their various adjusting possibilities as king pin angle, castor a.s.o. consist of alloy delta wishbones below. Solid alloy rear axle plates reduce the wear at the rear axle and give an enormous driving stability. 4 oil-pressure shock absorbers controlled by a pushrod suspension as well as stabilizers guarantee an optimal ground contact.We deliver the chassis selectively with tuning bowden cable brakes for front or respectively rear axle. The model is powered by a high-capacity 26 cm³ engine with airbox and Tuning pipe.Equipment of the FG Formula 1 Competition kitCNC-cut 5mm alloy chassis with lateral carbon fiber inserts, 26 cm³ engine, inlet silencer, Tuning pipe, FG gearwheel drive, ball drive, complete rear and front axle carrier unit with integrated engine quick-fixing device, double alloy wishbone fastenings, lower alloy delta wishbones at front and rear axle, front and rear alloy uprights, ball-bearing servo saver, steering stops, pushrods, 4 oil-pressure shock absorbers with alloy damper pistons, mechanical Tuning brakes at front and rear, stabilizer for front and rear axle, 10mm alloy balls, rear spoiler, polycarbonate body shell, polyamide front spoiler, receiver box, competition tires with tire inserts.We deliver the models as a kit including mounting instruction. The body parts are made of clear polycarbonate for your own painting. FG stickers and writings are enclosed.For the final assembly of the models you need further: radio control system (transmitter, receiver), 1 large steering servos (each approx. 40 - 50 kg), 2 servo for throttle brake (approx. 20 - 30 kg), batteries and charger.These parts are not included and must be supplied or ordered separately when the rc installation option is selected! Includet Zenoah 26cc engine Clear bodyshell and polycarbonate spoiler Mechanical brakesDimensions Length: 960mm Width: 440mm Height: 230mm Wheelbase: 620mm Formular 1 models in action!

€2,499.95*

Configure now

10040 FG Rear axle carrier left - 1pce.

Fits formula 1 cars only.

€23.90*

10010 FG Alloy chassis F1 - 1pce.

Suitable for the Formula 1.

€215.10*

y1008 CFH gas

Genuine HT spare/option part. Propan/Butan gas mix for the torch above, similar units and cigarette lighters. Contents:1 piece / 100 ml

€3.50*

B61008/61015 Chassis braces

Contents:2 piece

€14.90*

10081/01 FG Engine support for CY / Zenoah

Genuine FG spare/option part. Suitable for CY / Zenoah G230/240/260/270.Contents:1 piece

€7.70*

E540080-L UFRC A-arm, rear lower l/h

Genuine UFRC spare/option part. Fits Growler GX1.Contents:1 piece

€18.90*

HA0080 Hurrax Steel wheel drives 17 mm hex, 19 mm wide

Genuine Hurrax spare/option part.17 mm hex wheel drives, 19 mm wide with 8 mm bore diameterm. Weight 20 grams.Contents:2x Adaptor4x Grub screws M 5x5 mm

€19.90*

E540080-R UFRC A-arm, rear lower r/h

Genuine UFRC spare/option part. Fits Growler GX1.Contents:1 piece

€18.90*

30 products found for "fg_10080"

Filter products

rc-car-online - Home