500608186 Carson LiPo pack 3900mAh 11,1V, 3S/1P, 60C
€64.90
Available
Product information "500608186 Carson LiPo pack 3900mAh 11,1V, 3S/1P, 60C"
Dimensions:
- Width: 45 mm
- Length: 136 mm
- Height: 25 mm
- Weight: 294 mm
Contents:
- 1 piece
Werkstrasse 1
90765 Fürth
Germany
Login
Accessories / Spare parts
Genuine Top Tuning spare/option part. Dimensions:Length: 420 mmWidth: 20 mmContents:2 pieces
Genuine Top Tuning spare/option part.For secure transport and storage of LiPo batteries. For batteries up to approx. 175 x 75 x 70 mm.Contents:1 piece
T-connector male / female with spring loaded 4 mm contact.Select from:y1301/01 - male connectory1301/02 - female connectory1301/03 - one each male and female connector
Charging cord for batteries with T-connector; cable length 300 mm, silicone insulated cable with gold-plated connectors.
Adapter cable T male to EC5 female.Dimensions:Length cable: 50 mmTotal length: 85 mmContent:1 piece
Genuine rc-car-online spare/option part. Compatible with up to 8S lithium batteries. In addition to the LiPo Tester, the CellMeter also has a built-in servo tester. This makes it possible to check at any time whether the servos are working properly.Technical data:High visibility LCD displayBalancer functionDischarge functionVery accurate battery checkSuitable for Li-Ion, LiPo, LiFe, LiHv, NiCd, NiMh batteries (up to 8 cells)Battery type and Zellenanzahl will be recognized automaticallyVoltage displayed individually for every cellWeight: 48gDimensions LxWxH: 84 mm x 52 mm x 15 mmContents:1 piece
Alternatives
Rc-car LiPo hardcase battery with XH balancer connector and cable with T-connector (link to the T-connector). Battery conector:Typical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesCan be charged with 5C when time is criticalRecommended charge with 2 3CPArt numberLiPo-Battery typeCable cross sectionCaseCapacity mAhVoltWidth +/- 1,5 mmHeight +/- 1,5 mmLength +/- 5 mmWeight +/- 10gCont. currentPeak currenty1300/023 S / 2 P12AWG/3,3hart6.00011,138,046,5137,546240C(240A)80C(480A)y1300/034 S / 2 P12AWG/3,3hart5.50014,848,046,5137,555840C(220A)80C(440A)y1300/046 S / 1 P10AGW/5,27soft5.20022,248,046,0155,070845C(189A)90C(378A)y1300/063 S / 2 P10AWG/5,27soft6.00011,144,033,0137,042440C(240A)80C(480A)
Genuine Carson spare/option part. Dimensions: Width: 45 mm Length: 136 mm Height: 25 mm Weight: 294 mm Contents:1 piece
Customers also viewed
Highlights News 2026 Tuning aluminium lower wishbones, one-piece (front and rear) FG hydraulic brakes front and rearTuning chassis plate black anodised and milled Tuning milled aluminium rear axle linkage for toe-in adjustment Perforated tuning clutch bell Side flaps on the rear spoiler in carbon fibre Highlights Formel 1 Competition- This model is fitted with numerous aluminium parts: - front and rear side bulkheads, rockers, engine mount, suspension arm ends...Steel made Uniball sockets all possible enable all adjustments of the front and rear suspensions.The transmission made with a gearwheell drive offers outstanding reliability and smooth operation.Technical description of the FG Formula 1 Competition :The undercarriage of the FG Formula 1 Competition is built on an 5mm alloy chassis. All screws at the bottom of the chassis are countersunk.Front and rear axle mounts as well as the engine unit are connected over the complete length of the chassis, therefore we achieved almost the stiffness of a monocoque chassis. The quick fix system of the engine makes a fast changing of the engine possible. The drive to the rear axle is carried out over several easy-running front gearwheels and an FG ball drive at the rear axle. A separate flange bearing holds the clutch bell in order to relieve the crankshaft. Front and rear axle with their various adjusting possibilities as king pin angle, castor a.s.o. consist of alloy delta wishbones below. Solid alloy rear axle plates reduce the wear at the rear axle and give an enormous driving stability. 4 oil-pressure shock absorbers controlled by a pushrod suspension as well as stabilizers guarantee an optimal ground contact.We deliver the chassis selectively with FG hydraulic brakes for front or respectively rear axle. The model is powered by a high-capacity 26 cm³ engine with airbox and Tuning pipe.Equipment of the FG Formula 1 Competition CNC-cut 5mm alloy chassis with lateral carbon fiber inserts, 26 cm³ Zenoah engine, inlet silencer, Tuning pipe, FG gearwheel drive, ball drive, complete rear and front axle carrier unit with integrated engine quick-fixing device, double alloy wishbone fastenings, lower alloy delta wishbones at front and rear axle, front and rear alloy uprights, ball-bearing servo saver, steering stops, pushrods, 4 oil-pressure shock absorbers with alloy damper pistons, FG hydraulic brakes at front and rear, stabilizer for front and rear axle, 10mm alloy balls, rear spoiler, polycarbonate body shell, polyamide front spoiler, receiver box, competition tires with tire inserts.For the final assembly of the models you need further: radio control system (transmitter, receiver), 1 large steering servos, 2 servo for throttle brake, batteries and charger.These parts are not included and must be supplied or ordered separately when the rc installation option is selected! Includet Zenoah 26cc engineAirboxPipe Clear bodyshell and polycarbonate spoiler FG hydraulik brakes front and rearDimensions Length: 960mm Width: 440mm Height: 230mm Wheelbase: 620mm Formular 1 models in action!
3 steel gears 24/25/26 teeth with 18 mm square and 1.5 module for Carson Dirt Attack GP from the Carson 500305239 gear set. 1 piece 24 teeth 1 piece 25 teeth 1 piece 26 teeth
Genuine Losi spare/option part.Features:Extremely affordable high-capacity receiver packs for higher-current-drain RC vehicles. Increased run times over standard receiver packs. Universal connector plugs directly into the switch harness for all radio systemsDimensions:Width: 112 mmHeight: 46 mmDepth: 23 mm
Rim with 18 mm square drive. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.1/6 monster truck tires, hard, glued on chromed FG Monstervrim. Outer Ø 210mm, width 120mm, fits FG Marder, Off-Road Buggy, Beetle and Monster cars. Fits other makes of 1/6 cars as well, wheel square size must be checked prior to installation. Installation of tires with a different diameter may require a change in gear ratio as well.Diameter 195 mm Width 120 mm 1 pair