DBXL017 ATOP Aluminum front chassis brace for DBXL-E 2.0
€29.90
Available
Product information "DBXL017 ATOP Aluminum front chassis brace for DBXL-E 2.0"
CNC-machined 6061-T6 aluminum front chassis brace for Losi DBXL-E 2.0.
Compared to the stock plastic part (from set # LOS251100) the higher strength of the aluminum part noticeably increases the chassis rigidity.
Contents:
- 1 piece
Login
Customers also bought
Genuine ATOP spare/option part. CNC machined 6061-T6 aluminum rear uprights from ATOP to fit all Losi DBXL and MTXL versions, gasoline and electric.Significantly more rigid than the stock plastic version, this part contributes to increased directional stability. Plastic bushings for the hinge pins ensure reduced wear.Two additional mounting points are available for attaching the camber rods, allowing the model's handling to be better matched to the track.Comes with wheel bearings included. Contents:2 pieces
Genuine HT spare/option part.Very strong linkage with M6 steel ball joints.M6 threaded rod with lock nuts, balls with holes for M4 screws.Maximum length about 96 mm, but through cutting the M6 rod allows for a minimum length of 48 mm.Significantly stronger than the standard plastic version, and especially recommend when using the Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP servo, this linkage can be used with "normal" servos as well.The threaded rod is not designed as a turnbuckle for a reason because there is not need to change the adjusted length for this application after installation. The setting accuracy of 0.5 mm (½ turn) means a maximum difference to the ideal length of 0.25 mm. This is always sufficient, the trim on the transmitter handles the final adjustment.On the other hand, a connecting rod with the same thread on both ends will always keep its setting when installed, even when both lock nuts are not tightened against the ball joints. Therefore reliability is higher.Set includes:2 x steel ball joints M62 x flat lock nuts1 x M6 x 60 mm threaded piece for Losi 5ive-T1 x M6 x 80 mm threaded piece for Losi 5ive-T 2.02 x spacer tubesContents:1 piece
Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum rear chassis brace 1 + 2 for Losi DBXL-E 2.0.Compared to the stock plastic part (from set # LOS251100) the higher strength of the aluminum part noticeably increases the chassis rigidity.Contents:1 set
Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum front top chassis brace; fits Losi DBXL-E 2.0 only.Stiffer than the stock plastic part (from set # LOS251097), the aluminum brace reduces chassis tweak in the area of the steering assy. Contents:1 piece
Genuine GPM spare/option part. Extremely sturdy split-style servo horn, fits servos with 8 mm/15T output shaft (e.g. DM4000, large Savöx/Losi/Hitec, Multiplex Rhino etc.). It is therefore also suitable for use in many other applications. Linkage mounting holes tapped for M4 screws.Contents:1 piece
Customers also viewed
Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum rear chassis brace 1 + 2 for Losi DBXL-E 2.0.Compared to the stock plastic part (from set # LOS251100) the higher strength of the aluminum part noticeably increases the chassis rigidity.Contents:1 set
Genuine MadMax spare/option part.Losi and HPI foam tire inserts from can be used.The BIG DIGGER tires had 84 extremely strong tread blocks on the front tires and 96 on the rears, with more than 1 cm² cross-section and 6 mm tread depth, allow for best power transfer and provide excellent grip even on loose surfaces like sand or soil. Dimensions:Outer diameter: 170 mmTyre width: 60 mmContents:2 pieces / 1 pair Some off-road tires knowledge can be found here!
With complete RTR equipment y1382 Original Maxi-Pin 1/6 offroad competition tire The legendary 1/6 FG Marder 2WD Off Road Buggy! For many years the ideal entry into the elite class of radio controlled cars! The large-scale car with tough 26 cc engine is operated with normal 2-stroke gas. A 800 cc tank gives almost an hour of driving fun! For the FG Marder theres a wealth of option parts, most of them are not exactly a must, but make infinitely more fun! The FG Marder comes with completely installed remote control. Just fuel up, start the engine and drive off.Features:The model is built on an angled 4 mm chassis plate. All screws on the bottom are countersunk with no protruding heads. Double a-arms front and rear axle with 4 high volume oil-filled shock absorbers ensure optimum traction.All rotating parts are supported by ball bearings. Secondary spur gears, bevel gears inside the differential and all drivetrain parts are case-hardened. Rocker panels protect the car against contamination from below. The model is equipped with a powerful 26 cc engine. It needs a regular 2-stroke petrol/oil mix (available at every gas station). The integrated pull starter allows for easy engine starts without additional equipment.Dimensions: Length: 690 mm Width: 420 mm Height: 270 mm Wheelbase: 475 mm
Genuine Losi spare/option part. Contents:1 piece
Genuine Losi spare/option part. Contents:1 piece