LOS251046 Losi Wing, Black, DBXL-E

€29.99*

Prices incl. VAT plus shipping costs

Available

Product number: losi_los251046

EAN: 605482086681

Product information "LOS251046 Losi Wing, Black, DBXL-E"

Genuine Losi spare/option part.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

LOS250055 Losi Wing, FOX Racing, DBXL-E 2.0

Genuine Losi spare/option part. Contents:1 piece

€29.99*

Customers also bought

TLR252003 TLR Axle Boot Set 5ive-B, 5ive-T

Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-B; for 5ive-T and Mini WRC only in combination with TLR252004 F/R Stub Axle.Contents:1 set

€29.99*

LOSB3214 Losi Center Diff Outdrive Set 5T, 2 pcs.

Item N° LOSB 3214 Center Diff Outdrive Set 5T, 2 pcs.Content:2 Pieces

€39.99*

LOSB3212 Losi F/R drive shafts Set 5T and Mini

Genuine Losi spare/option part.Fits Losi 5ive-T and 5ive Mini.Content:2 pieces

€39.99*

LOSB6560 Losi Drive Pin Set 5ive-T, TLR 5ive-B and Mini WRC

Genuine Losi spare/option part. Suitable for Losi 5ive-T, TLR 5ive-B and 5ive Mini WRC. Part is delivered in silver or black color from vendor!Measures and content:4 x 18 mm - 6 pieces5 x 25 mm - 4 pieces4 x 20 mm - 6 pieces

€10.99*

LOSB2073 Losi Front Spindle Carrier Set 5T, TLR 5ive-B and Mini

Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini.Dimensionally identical with B59010Contents:2 pieces

€19.99*

TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters

Genuine TT spare/option part.The new and improved failsafe modul.This kill switch module works with most FM and 2.4 GHz rc-systems. Not compatible with AVC-equipped receivers! You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. With this module you can stop the engine with your radio. Additionally the module features a failsafe function which stops the engine when the rx-battery's voltage drops below a certain level or the rc-system has a glitch. A kill switch module fulfils two tasks. On the one hand, as a safety device, it is intended to shut off an engine with magneto ignition in case of failure of the remote control, and on the other hand, the engine can be stopped at any time by remote control.While the latter is mainly used for convenience, the safety aspect is what really matters.The failsave circuit integrated in all modern remote controls may brake the vehicle in the event of a radio interference, but this feature is dependent on the basic functionality of the receiver system and its power supply. However, if the receiver, the gas servo or the power supply fails completely, the failsave of the remote control can no longer do its job. The vehicle may be running haywire at full throttle.In these cases, the kill switch will cut the ignition of the engine and the vehicle will roll out without power.Features:Ready to install no soldering requiredRemote LED for easy-to-spot operational status (ignition live/killed)Optically coupled to isolate the ignition from the radio systemThreshold value for undervoltage protection (4V, 5V, 6V) adjustable with jumpers allows adaptation to the rx-battery type (LiPo, LiFePo, NiMH, NiCd)Contents:1 piece

€42.90*

AR-023 Fuel line hose clamps

For a secure fit of the fuel line. The self-adjusting clamps are suitable for diameters from 6 to 7 mm.Contents:10 pieces

€8.90*

Similar products

LOS252017 Axle Boot Set Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:10 pieces

€29.99*

LOS252009 Differential Rebuild Kit Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 set

€8.99*

LOS250055 Losi Wing, FOX Racing, DBXL-E 2.0

Genuine Losi spare/option part. Contents:1 piece

€29.99*

LOSA99172 Camber Gauge

Genuine Losi spare/option part. Contents:1 piece

€19.99*

LOS252006 Front/Rear Differential Outdrive Set Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:2 pieces

€29.99*

LOS250019 Losi LED Light Bar set, complete, DBXL-E

Genuine Losi spare/option part. Contents:1 piece

€59.99*

LOS252010 Differential Case Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 set

€29.99*

Details

LOS250016 Body Set, Screened, black, DBXL-E

Genuine Losi spare/option part. Contents:1 set

€169.99*

LOS251053 Losi Roll Cage, Flip, Complete, DBXL-E

Genuine Losi spare/option part. Contents:1 set

€119.99*

LOS251012 Radio tray & gas tank mount Losi DBXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 set

€59.99*

Details

LOS251045 Losi Wing Mount, Complete, DBXL-E

Genuine Losi spare/option part. Contents:1 set

€39.99*

LOS252001 Driveshaft & Axle Dogbone Losi DBXL 1/5 4WD

Genuine Losi spare/option part. Replacing the pins on DBXL drive shafts LOS252001, LOS252021, LOS252019: Remove set screw completelyOpen bench vise until the pin just fits between the jaws Position shaft on vice, held by a second person if necessaryDrive pin out with light hammer blows using a pin punch or a suitable comparable tool If Loctite was excessively used in the assembly, heating the shaft end may be required. Depending on the thread locking compound, you will strive for a value of 200 - 300°C. The shaft end must not be annealed! An annealed pin will mushroom on impact and make it very difficult to drive it out if not impossible. When installing the new pin from set LOS252020 make sure that the flat section of the pin is positioned under the set screw. The set screw should be just slightly tightened against the pin using high strength thread locker (link). Firm tightening puts the pin under preload and increases the risk of breakage!Contents:2 pieces

€39.99*

Customers also viewed

LOS250055 Losi Wing, FOX Racing, DBXL-E 2.0

Genuine Losi spare/option part. Contents:1 piece

€29.99*

LOS05020V2T1/BEAST Losi DBXL-E 2.0 4WD 12S Brushless RTR

Beast Edition: Standard equipment: Beast Edition: Motor: 780kV 650/620kV Regler: 160 A 250/300A S-Power: 8S 12S The Losi DBXL-E 2.0 is fitted with a Spektrum 780KV motor and a 160A Spektrum ESC as standard.With our 12S Beast Edition you can choose between 2 variants:1. Hobbywing Ezrun Max5 HV ESC 250A up to 12S LiPo BEC8 and Ezrun 650KV 4pol brushless motor, without surcharge.2. Hobbywing Ezrun Max4 HV ESC Sensorless 300A up to 12S LiPo, BEC 10A and Top Tuning Beast Brushless Motor 620KV 4pol, 190,00 € extra charge. The original DBXL-E set the world on fire as the go-to vehicle for large scale bashers and enthusiasts alike. Its agile handling, out of the box speeds and durability make it a fan favorite. Now the Losi® DBXL-E 2.0 continues to build on the legendary status! Known worldwide for their dominance in the gas 1/5 market, especially with the 5IVE-T 2.0, Losi has built the DBXL-E 2.0 to be cleaner and easier to use, but with performance and speed that outruns the competition. At home in any environment from dirt to pavement, wet or dry, especially with its 4WD drivetrain with larger 5mm drive pins, the desert buggy makes sure all the power is put to the ground. Drivers stay in control with a DX3 transmitter, a Spektrum SR6100AT 6 Channel AVC® Telemetry Surface Receiver, and scale-to-size Maxxis Creepy Crawler LT tires. This desert buggy features all the technological advances drivers. Finally, the DBXL-E 2.0 has a Losi race-inspired motorsports themed livery for that true off-road look. You get all this and more from the brand that represents the pinnacle of performance.The Full-Throttle Freedom of AVC® TechnologyThe receiver's built-in AVC® (Active Vehicle Control®) traction control system works behind the scenes, making hundreds of throttle and steering adjustments per second, so more of the motor's power is translated into ballistic speed and acceleration instead of just flying dirt. The patent-pending AVC system adds a level of performance that simply cannot be found with any vehicle from any manufacturer other than Horizon Hobby. Like traction control in your full-scale vehicle, you can activate or deactivate the system on the fly and adjust the level of stability based on driving conditions. Any RC vehicle can go fast and with AVC you can go faster while maintaining optimum stability in all driving conditionFeatures Without surcharge : Ezrun MAX5 HV G2 ESC 12S and Ezrun 650KV brushless engine. Surcharge 190€ : Ezrun MAX4 HV G2 ESC and Top Tuning BEAST 620KV Brushless engine. Spektrum DX3 radio system with AVC® and new SR6100AT Receiver Spektrum S906 1/5th scale metal gear servo Water protected components Aluminum Shock Towers Aluminum Center Diff Cup New Radio Tray designed for use with single or dual steering servos. New Heavy Duty Drivetrain with 5mm drive pins New Electric Chassis specific chassis braces for increased durability and strength Spedial motor adapter plate Modified ESC mounting bracket Beast decal sheet New ESC Mount Pinned Center Outdrive Cups New Gearboxes for improved drivetrain strength and stability New Steering Rack with helical servo saver design Updated Front and Rear Bulkheads Maxxis Creepy Crawler LT Tires Losi and Fox Shox race-inspired Motorsports themed livery Laser Etched FOX Logo Shock Caps Roof-mounted LED bar Dimensions Height: 317 mm Length: 844 mm Width: 495 mm Weight: 9,8 kg

€1,749.00*

Configure now