10 products found for "at_5t022"

rc-car-online - Home

AT-5T022 ATOP Aluminum differential case for Losi 5ive-T/2.0/B and Mini, one-piece design

Genuine ATOP spare/option part. CNC-machined from 6061-T6 aluminum by Area RC.The big advantage over the stock plastic part is its temperature insensitivity. While the plastic case loses its strength with increasing temperatures and may finally disintegrate, the aluminum case stays intact.The one-piece design guarantees a true running and leak-free case. Steel bushing for drive cup shaft and O-ring.Fits front, center and rear applications on all Losi 5ive versions and Mini!Contents:1 piece

€49.90*

AT-5T012 ATOP Front camber rod 5ive-T/2.0

Genuine ATOP spare/option part. Upper front camber rods with guide bushing set and with pivoted steel ball joints right/left thread and locknuts for Losi 5ive-T. Balls with 6 mm hole, adapter bushings for 5 mm screws, shortest distance between mounting points (center/center) 130 mm. Contents:2 pieces

€39.90*

AT-5T002 ATOP Aluminum rear chassis brace Losi 5ive-T/2.0 and Mini

Genuine ATOP spare/option part. CNC-machined from 6061-T6 aluminum by ATOP.New improved design combines increased strength with reduced weight (59 grams).Contents:1 piece

€39.90*

AT-5T021 ATOP Tie rod set for Losi 5ive-T/2.0

Genuine ATOP spare/option part.ATOP tie rod set with guide bushing set and with steel ball joints and turnbuckle center piece with locknuts for Losi 5ive-T.Balls with 6 mm bore diameter, adapter bushings for 5 mm screws, shortest distance between mounting points (center/center) 134 mm.Contents:2 pieces

€34.90*

AT-5T023 ATOP Aluminum front a-arms Losi 5ive-T/2.0

Genuine ATOP spare/option part.Light weight design (108 grams each), CNC-machined from 6061-T6 aluminum by ATOP a-arms fits Losi 5ive-T front.The chassis-side is wider than stock arms to bring the large longitudinal play at this point down to a reasonable level.Bushings for the hinge pins guarantee low wear. On the wheel side floating stainless steel bushings allow for normal tightening of the c-hub screws.Contents:1 set

€79.90*

AT-5T024 ATOP Aluminum rear a-arms Losi 5ive-T/2.0

Light weight design (119 grams each), CNC-machined from 6061-T6 aluminum by ATOP a-arms fits Losi 5ive-T rear.The chassis-side is wider than stock arms to bring the large longitudinal play at this point down to a reasonable level.Bushings for the hinge pins guarantee low wear.

€79.90*

AT-5T026 ATOP Aluminum spindles front for Losi 5ive-T/2.0/B and Mini

Genuine Atop spare/option part.CNC-machined 6061-T6 aluminum front spindles from Area RC; fits Losi 5ive-T/B and Mini. Significantly more rigid than the stock plastic partthese spindles improve steering precision and tracking.They also feature larger outer bearings (12 x 28 x 7 mm) than stock for higher load capacity. All four ball bearings are sealing bearings.Contents:2 pieces

€79.90*

AT-5T028 ATOP Aluminum radio plate Losi 5ive-T 1.0 and 2.0 for dual steering servos

Genuine ATOP spare/option part. CNC machined 6061-T6 aluminum radio plate from ATOP, fits Losi 5ive-T 1.0 and 2.0.This all-aluminum unit allows for installation of dual steering servos. The servo hole patterns are suitable for Losi original servos / servos with the size of 900S and K-Power.The box for the receiver battery has internal dimensions of 142 x 65 x 32 mm.Available with additional genuine Losi S900S 5ive-T steering servo incl- Y-harness in the options menu.Contents:1 piece

€169.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

AT-5T020 ATOP Aluminum servo clamps

at_5t020 Version: AT-5T020-01 - 0236

Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP. CNC-machined 6061-T6 aluminum servo clamps from Area RC distribute the load from the mounting screws equally over the complete area of the mounting tabs, protecting them against breakage. Available in two versions:AT-5T020-01 - 0236 for stock servos in Losi 5ive and DBXL, Savöx 235 und 236, Orange Power and other servos with a mounting hole distance of 18 mmAT-5T020-02 - 5765 for MPX Rhino, Hitec 5765 and other servos with a mounting hole distance of 16 mmContents:2 pieces

€12.90*

AT-5T023/024 ATOP Aluminum a-arms front and rear Losi 5ive-T/2.0

Genuine ATOP spare/option part.Light weight design (Total weight of all the wishbones is a mere 444 grams), CNC-machined from 6061-T6 aluminum by ATOP a-arms fits Losi 5ive-T front. The chassis-side is wider than stock arms to bring the large longitudinal play at this point down to a reasonable level.Plastic bushings for the hinge pins guarantee low wear. On the wheel side floating stainless steel bushings allow for normal tightening of the c-hub screws.Contents:1 set

€149.90*

10 products found for "at_5t022"

Filter products

rc-car-online - Home