- Models / cars
- General 1:5 / 1:6
-
Technic 1:5 / 1:6
- Front a. Rear axle
- Differential and bearings
- Brake, shocks
-
Engines & more
-
Engines - Gas and Accessoires
- Engines
- Cylinder kits
- Starter
- Engine spare parts
- Gaskets
- Exhausts
- Air filter / air boxes
- Carbs / isolators / accessories
- Spark plugs / spark plug caps
- Crankshafts and ball bearing for Engines
- Misc. engine accessories
- Tools
- Chrome parts
- Sealant
- Engine mounts / quick mount
- To fuel and supplies
- Reed valve block
- Motors - Electric and Accessoires
-
Engines - Gas and Accessoires
- Clutches & Drivetrain
- Tires, rims, adapter
- Bodyshells paint & more
- RC/Servos/Batteries/co.
- Conversion kits
- Used
- Work equipment
- Models 1/7 and smaller
- General 1:8 / 1:10
- Outlet
Filter products
7340/09 FG Rubber cap for kill switch
Genuine FG spare/option part.Protects the switch against dirt and splashes. Highly recommended for off-road use.Contents:1 piece
7354/08 FG Spacer plate for CY / Zenoah / Fuelie
Genuine FG spare/option part.Installs between carb and air filter/airbox to assure choke flap clearance.Contents:1 piece
6061 Mielke pull starter with hybrid starter function
Genuine Mielke spare / option part.Starting by pull starter or by cordless screwdriver or electric starter is possible.Pull starter with hybrid starter function. Who does not know it? A torn starter rope, blisters on your finger from constant pulling or a defective starter pawl. All these problems are a thing of the past with the hybrid starter.With the help of a cordless screwdriver the engine can be started very easily and if the battery of the cordless screwdriver is empty, the engine can be started by using the conventional way with the pull-rope starter.Please note:The starter shaft for electric start is inserted in a straight line in extension of the crankshaft. No part of the vehicle must be in the way here. On a model with a longitudinally mounted engine (e.g. Losi 5ive or DBXL vehicles) the rear axle will usually prevent the use of the electric start. The normal pull start by cable remains possible.Contents:1 piece
6062 Mielke clutch nut for E-start shaft
Genuine Mielke spare / option part.Spare part for Mielke 6061.Contents:1 piece
Spektrum SPM1454 Head Temperature Sensor-Long Lead, 1 pce.
Temperature sensor fits Losi 5ive-T.
LOSR5018 Losi Kill switch, for Losi 23/26/29 cm³
Genuine Losi spare/option part.Fits Losi 5ive-T and 5ive Mini.Replacement part for Losi 23/26/29 cm³ engine with item number: LOSR5001.Contents:1 piece
6063 Mielke starter shaft with one-way bearing for cordless drill
Genuine Mielke spare / option part.Spare part for Mielke 6061.Contents:1 piece
LOSB5039 Losi Clutch Shoes & Spring, 8,000 RPM. 5T, Mini, DBXL+MTXL
Genuine Losi spare/option part.Fits Losi 5ive-T and 5ive Mini.Contents:1 pieces
y0092 Alloy starter pawl, CNC-machined
Genuine HT spare/option part. New billet version, CNC-machined!Fits Zenoah G230/240/260/270/290/320, Losi, HPI Fuelie and CY engines. Not as easily damaged as the stock plastic unit.Does not fit PT (Carson/Smartech) engines!Contents:1 piece
6061/01 Mielke Zenoah Hybrid starter, pullstart unit only
Genuine Mielke spare / option part.Spare part for Mielke 6061.Contents:1 piece
Carburetor Walbro WT 813
y0251 Performance carburetor with accelerator pump type: WT-813Walbro WT-813A carb with accelerator pump, improves low end response when the engine is tuned for maximum performance. 15.88mm bore, 12.7mm venturi. Ready for installation with modified shaft already installed. Fits Zenoah G230/240/260/270 engines and their CY/HPI Fuelie clones as well. Fits all Zenoah G230/240/260/270 and 290 engines as well as the respective Chung-Yang (CY) versions, also Losi and HPI Fuelie, Smartech, Carson PT engines, and many others.
7338 Insulated carburetor spacer for CY / Zenoah / Fuelie
Genuine FG spare/option part. Made from T7075 aluminum with wide epoxy insulator plates to protect against engine heat transfer. Venturi-shaped bore increases engine performance.For easier installation removing the cylinder shroud is recommended .Contents:1 Set
y1423 Engine flange for engine quick mount, G320 version available for FG 1/5 models
Genuine HT spare/option part. For fitment on additional engines or as a spare part for engine quick mount y1421. The engine flange is available in two versions:y1423/01 for all Zenoah and Chung Yang engines up to 30 cm³ with standard bolt pattern 50 x 36 mmy1423/02 for Zenoah G320 - For installation of a Zenoah G320 in a FG Evo (Model range from 2004 till 2014). Fits the standard quick mount.When mounting the motor flange the bolts/nuts must be tightened together in small steps. To mount the studs from y1421/01 or the screws from y1421/02 the use of thread locking compound (link) is required.Please note: y1423/01 does not fit in combination with Zenoah OEM clutch!
LOSR5026 Losi Muffler screws for 26 cm³
Genuine Losi spare/option part. Replacement part for Losi 23/26/29 cm³ engine with item number: LOSR5001.Measures:Length: 65 mmDiameter: M5Part is delivered in silver or black color from vendor!Contents:2 pieces
y1421 Engine quick mount for G320 Zenoah in FG 1/5 scale
Genuine HT spare/option part. The engine quick mount replaces the standard clutch housing. It allows a much faster installation or removal of the engine since the clutch side of the engine is only be clamped by one single screw. The gear plate remains in the vehicle, the motor flange on the engine.The engine quick mount fits all FG 2WD on-road cars with horizontal engine (except Formula 1) Sportsline, Competition and Evo (EVO model range till 2003, except Evo 2020 series).We are sorry, but due to the design the quick mount cannot be used for FG 1/6 off-road and monster cars.For the first time it is now possible to install the Zenoah G320 in these cars! For cars allready equipped with a FG quick mount only the engine flange y1423/02 is required.The quick mount is available in two versions:y1421/01 for all Zenoah and Chung Yang engines up to 30 cm³ with standard bolt pattern 50 x 36 mmy1421/02 for Zenoah G320When mounting the motor flange the bolts/nuts must be tightened together in small steps. To mount the studs from y1421/01 or the screws from y1421/02 the use of thread locking compound (link) is required.Please note: y1421/01 does not fit in combination with Zenoah OEM clutch!
LOSR5017 Losi Sparkplug, for Losi 23/26/29 cm³
Genuine Losi spare/option part.Fits Losi 5ive-T and 5ive Mini.Replacement part for Losi 23/26/29 cm³ engine with item number: LOSR5001.Content:1 piece
y1431 Ignition cable with waterproof spark plug connector, 1 piece
Waterproof spark plug connector with cable. Suitable for Zenoah, Chung Yang, HPI Fuelie, King, Losi, PT Carson Smartech and many other engines. - Ignition cable length 240 mm. - Spark plug connector suitable for standard spark plugs from Campion and NGK with round connection (without thread). 1 set as shown.
LOSR5009 Losi Engine cover (plastic), for Losi 23/26/29 cm³
Genuine Losi spare/option part.Fits Losi 5ive-T and 5ive Mini.Replacement part for Losi 23/26/29 cm³ engine with item number: LOSR5001Content:1 piece
7323/08 FG Complete pull start unit for CY / Zenoah / Fuelie / Losi engines
Genuine FG spare/option part. Complete starter unitPull start unit for CY / Zenoah G230/240/260/270/290/320.Contents:1 piece
LOSR5015 Losi Flywheel, for Losi 23/26/29 cm³
Genuine Losi spare/option part.Fits Losi 5ive-T and 5ive Mini.Replacement part for Losi 23/26/29 cm³ engine with item number: LOSR5001.Content:2 piece
y1422 Clamping ring for engine quick mount
Genuine HT spare/option part. Spare part for engine quick mount y1421.
LOSR5016 Losi Ignition coil and screws, for Losi 23/26/29 cm³
Genuine Losi spare/option part. Replacement part for Losi 23/26/29 cm³ engine with item number: LOSR5001.Content:1 piece