Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

6063 Mielke starter shaft with one-way bearing for cordless drill

Product information "6063 Mielke starter shaft with one-way bearing for cordless drill"

Genuine Mielke spare / option part.

Spare part for Mielke 6061.

Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

5476/01 Mielke HR Wheel nuts M8
Mielke wheel nuts for 8 mm axles!

€29.00*

Average rating of 0 out of 5 stars

y3017 Manufacturer sponsor decals set, universal
y3017 Elasto film: Original film
Genuine HT spare/option part. Universal sponsor decals suitable for all body shells. The decals are printed on clear film and have to be cut out by yourself.All logos are 40 mm wide, their heights differ depending on the logo; four logos each per sheet.With logos from: Kenwood, Sparco, Shell V-Power, Sonax, Recaro, O-Z Racing, Hankook, ABT, Michelin, H&R, Eibach, Castrol, Akrapovic, Bosch, Bilstein.Size (Height x Width):Complete sheet: 310 mm x 450 mmThis decal set is also available in the elasto version! Decal sets made from elasto film are substantially more durable and have a much more massive adhesive layer. Unfortunately, the elasto film has three times the price of the vinyl normally used for decal sets. Therefore the elasto decal sets have an approx. 30% higher price. And sorry, but the choice of elasto decal sets is still limited at the moment! Attention:Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells. However, with the usual polycarbonate body shells the standard decals are sufficiently durable.Contents:1 piece

€19.90*

Average rating of 0 out of 5 stars

y0273 Opel Vectra team decals Valvoline - set
Valvoline team decals for Opel Vectra body shell.Sheet dimensions:500 x 230 mm (3x)230 x 80 mm

€29.00*

Average rating of 0 out of 5 stars

6061 Mielke pull starter with hybrid starter function
Genuine Mielke spare / option part.Starting by pull starter or by cordless screwdriver or electric starter is possible.Pull starter with hybrid starter function. Who does not know it? A torn starter rope, blisters on your finger from constant pulling or a defective starter pawl. All these problems are a thing of the past with the hybrid starter.With the help of a cordless screwdriver the engine can be started very easily and if the battery of the cordless screwdriver is empty, the engine can be started by using the conventional way with the pull-rope starter.Please note:The starter shaft for electric start is inserted in a straight line in extension of the crankshaft. No part of the vehicle must be in the way here. On a model with a longitudinally mounted engine (e.g. Losi 5ive or DBXL vehicles) the rear axle will usually prevent the use of the electric start. The normal pull start by cable remains possible.Contents:1 piece

€114.90*

Average rating of 0 out of 5 stars

y0732 GPM Big Scale Cross adjustable 3 shoe clutch with tuning clutch bell, 1 pce.
Regular price Big Scale Clutch: 109,90 EUR Nitriding hardened clutch bell: 40,50 EUR complete price:.......................150,40 EURAdjustable 3-shoe clutch for:Zenoah / Chung Yang / HPI - Fuelie / Smartech PT and many other engines.The Big Scale-Cross clutch is equipped with 1.3 mm springs. This version is particularly suitable for off-road use.The GPM-Big Scale clutch:Suitable for racing and for the ambitious hobbyist driver. Unlike the stock clutch, the installed GPM-Big Scale clutch can be adjusted by turning one single screw. A 2.5 mm allen key wrench is required for this application.Therefore it is possible to precisely adjust the clutch engagement depending on track characteristics.Attention: You must use adhesive y0743 Clutch-Safe when replacing clutch pads!

€129.99*

Average rating of 0 out of 5 stars

10530 FG 4-block clutch 05 adjustable
Genuine spare/option part.Reliable and approved 4-block clutch with teflon linings, adjustable. The well approved clutch was reworked in some details. This clutch is excellent for the use in Off-Road models and is distinguised through reliability and low wear.Adjustable and in many details improved 4-block clutch. This clutch is suitable for all FG models and other brands with Zenoah or CY engines.Not suitable for HPI cars.Contents:1 piece

€119.50*

Similar products

Average rating of 0 out of 5 stars

7337 FG Carburetor gasket for CY / Zenoah / Fuelie
Genuine FG spare/option part.For Zenoah G230/G240/G260/G270/G290/G320Applications:Click here!Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:1 piece

€5.90*

Average rating of 0 out of 5 stars

7335 FG Insulator gasket for Zenoah / CY / Fuelie
Genuine FG spare/option part.For Zenoah G230/G240/G260/G270/G290Applications:Click here!Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:1 piece

€4.30*

Average rating of 0 out of 5 stars

7332 FG Silencer gasket for CY / Zenoah / Fuelie / PT
Genuine FG spare/option part.For all Zenoah / CY / Fuelie / PT engines.Applications:Click here!Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:2 pieces

€4.90*

Average rating of 0 out of 5 stars

7373 FG Pump for CY / Zenoah
Genuine FG spare/option part.Contents:1 piece

€9.90*

Average rating of 0 out of 5 stars

ST-AN21D SPEED TEC 0,25 mm EWP207 Silencer gasket for CY / Zenoah AN - expansion sealing gasket
Genuine Speed-Tec spare/option part. For all Zenoah G230/240/260/270/290/320 / CY / Fuelie / PT / Losi / CarsonAN - expansion sealing gaskets are in use in the 2-stroke motor sports for years and are based on NBR-linked cellulose fibers. They are especially used for sealing hot oils, greases and fuels! The sealing material is compressed during assembly, and as soon as it comes into contact with fuel, it swells again. Thus it is i.e. possible to make up for irregularities in the sealed surfaces (i.e. cylinder / crankcase) and seal them properly! The material of the SPEED TEC AN - expansion sealing gaskets guarantees a very good dimensional accuracy and is often the solution for leaks on your engine! Technical data of the material in contact with fuel:- Rebound ASTM G > 30%; increase in thickness < 5%; weight gain < 55%;- Compressibility ASTM F36 G 22.5% +/- 2.5 27.5% +/- 7.5Contents:1 piece

€3.50*

Average rating of 0 out of 5 stars

7309/09 FG Piston ring for Zenoah G230/04
Genuine FG spare/option part.Width 0.8 mm.Hint for installation: The green dot on the ring goes towards the clutch side!Contents:1 piece

€15.30*

Average rating of 0 out of 5 stars

7357 FG Air filter foam for CY / Zenoah / Fuelie
Genuine FG spare/option part.Contents:2 pieces

€8.50*

Average rating of 0 out of 5 stars

6061 Mielke pull starter with hybrid starter function
Genuine Mielke spare / option part.Starting by pull starter or by cordless screwdriver or electric starter is possible.Pull starter with hybrid starter function. Who does not know it? A torn starter rope, blisters on your finger from constant pulling or a defective starter pawl. All these problems are a thing of the past with the hybrid starter.With the help of a cordless screwdriver the engine can be started very easily and if the battery of the cordless screwdriver is empty, the engine can be started by using the conventional way with the pull-rope starter.Please note:The starter shaft for electric start is inserted in a straight line in extension of the crankshaft. No part of the vehicle must be in the way here. On a model with a longitudinally mounted engine (e.g. Losi 5ive or DBXL vehicles) the rear axle will usually prevent the use of the electric start. The normal pull start by cable remains possible.Contents:1 piece

€114.90*

Average rating of 0 out of 5 stars

7340/09 FG Rubber cap for kill switch
Genuine FG spare/option part.Protects the switch against dirt and splashes. Highly recommended for off-road use.Contents:1 piece

€3.90*

Average rating of 0 out of 5 stars

7304/02 FG Ball bearing for CY / Zenoah / Fuelie
Genuine FG spare/option part.Dimensions:12 x 28 x 8 mmContents:2 pieces

€21.90*

Average rating of 0 out of 5 stars

7706 FG Cylinder gasket for Zenoah G240, G270, G290 and 4-Bolt Chung Yang
Genuine FG spare/option part.Applications:Click here!The gasket have a thickness from 0,40 mm. Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:1 piece

€5.40*

Average rating of 0 out of 5 stars

7375 FG Carburetor screw for CY / Zenoah / Fuelie
Genuine FG spare/option part.4-40 UNC x 1/8"Part is delivered in silver or black color from vendor!Content:1 piece

€3.20*

Customers also viewed

Average rating of 0 out of 5 stars

y1600 SPEED TEC CRANK Team-Edition Zenoah G230 Tuning engine
The SPEED TEC CRANK genuine Zenoah engine is optimized for performance by hand with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC Team Edition version modifications: Cylinder & case:Adjustment of compression; enlarged ports, fuel management milled, machined and polished exhaust,the intake is flow-optimized the case is specially matched with enlarged and flow-optimized cross section towards the ports Cylinder modified for installation of the ignition systemPiston:Transfer port area optimized for flow, weight reduced and the piston-roof is flow-optimized and polishedCrankshaft:is adjusted, aligned and balancedFlywheel and ignition:Latest SPEED CRANK SV ignition system for rc-car race engines with air baffles, a special balanced 62 mm diameter flywheel, modified ignition coil mount and special ignition system allows for the extremely fast revving of the SPEED TEC team edition engine and guarantees a significantly improved performance.The machined and more than 30% lighter than stock CRANK flywheel with fins on both sides contributes to the optimized engine cooling.Gaskets:Premium quality gaskets installed. Cylinder gasket installed using elastic gasket sealer.Isolator:Special matched and raised insulator Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€949.00*

Average rating of 0 out of 5 stars

TLR356002 TLR Outerwear Square Pre-Filter 5ive-B
Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-B.Contents:1 piece

€39.99*

Average rating of 0 out of 5 stars

6062 Mielke clutch nut for E-start shaft
Genuine Mielke spare / option part.Spare part for Mielke 6061.Contents:1 piece

€24.90*

Average rating of 0 out of 5 stars

y1409/01 GIANT GRIP tires on MadMax Extreme rims for Losi and HPI, pair
GIANT GRIP 190 x 70 with black colored MadMax Extreme rims, 20-fold screwed, very tough, with 24 mm hex drive and reinforced beadlock rings for Losi 5ive-T and Desert-Buggy XL as well as all HPI Baja 5 B/T cars.The GIANT GRIP provides giant traction through 96 about one cm² wide and 5 mm high strong lugs, getting ample grip even on loose surfaces like sand and soil.Due to the extreme strain caused by the GIANT GRIP tires the MadMax rim with reinforcement ring had to be optimized once more.The GIANT GRIP tires come with strong special tire inserts which allow to transfer the power without canting, even on heavy cars like the Losi 5ive-T.Dimensions:Outer diameter: 190 mmTire width at bead 70 mmTread width 80 mmReinforced 24 mm hex wheel driveThe MadMax Giant Grip tires use 60 mm wide rims ( y1415/01 or y0761/01).The video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!

From €64.90*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Plugin Development