TT1031 TopTuning Carburetor heat sink for all Zenoah/CY/HPI/Losi and PT (Smartech!) engines
Original TopTuning spare/option part. Carburetor heat sink for all Zenoah/CY/HPI/Losi and PT-Smartech/Carson engines.Fits all Walbro 603/813/990/771/527/1107 carburetors as well as all Smartech/Carson PT engine carburetors and many more!The TopTuning carburetor heat sink counteracts the notorious vapor lock at high engine temperatures.In fact all current large scale engines have a special adaptor for the thermal insulation of the carb (isolator) to keep the carb as cool as possible, so that the fuel does not form bubbles due to heat transfer from the cylinder. And without this isolator the gasoline would literally cook after a short operating time and therefore the engine would receive a leaner mixture. The much feared lean-out until the engine stalls is inevitably.Unfortunately, even a special isolator is often insufficient at higher ambient temperatures or when the engine is subjected to higher loads, e.g. in racing. In such scenarios the better heat dissipation of the Top Tuning carburetor heat sink contributes to the solution of the problem.The easy to install heat sink, requires a considerable manufacturing and milling effort and fits easily to all common 1:5/1:6 large scale cars, such as FG, Mecatech, Smartech/Carson, HPI, Losi, etc..For installation in FG 4WD cars the rear cross member # 66212 must be modified.Attention: the Allen head screw is an imperial size and therefore not compatible with metric Allen wrenches! Available in our options menu Content: Carburetor heat sink 1 x Allen head screw #8-32 x 5/8" (for Walbro carbs) 1 x washer 4 mm
7375 FG Carburetor screw for CY / Zenoah / Fuelie
Genuine FG spare/option part.4-40 UNC x 1/8"Part is delivered in silver or black color from vendor!Content:1 piece
7370 FG Diaphragm for CY / Zenoah
Genuine FG spare/option part.Set includes diaphragm and gasket.Contents:2 pieces
7379/08 FG Choke lever for CY / Zenoah / Fuelie
Genuine FG spare/option part.Contents:1 piece
y0037/04 Screw for throttle lever, high strength, 4-40 UNC x 1/8, 3 pices
High strength mounting screw for the throttle lever on all Walbro carbs (included with ball-raced carbs). 1/16" Allen key size.Content:3 pieces
7371 FG Plastic part and carburetor nipple
Genuine FG spare/option part.Contents:1 piece
y0037/01 Ball bearings, sealed type 2RS (3/16"x5/16"x1/8")
Genuine HT spare/option part. Ball bearings, sealed type 2RS (3/16x5/16x1/8).Content:2 pieces
7363 FG Diaphragm for all CY und Zenoah engines
Genuine FG spare/option part.Contents:2 pieces
y1366 TURBO-TWIST 325 mm special XXL screw driver
TURBO-TWIST, 325 mm long screw driver in top quality.Allows easy access to hard-to-reach screws in any 1/5 & 1/6 car.Features:Soft Grip handlesExtra long 325 mm shaftChrome Vanadium hardened and tempered bladesBlackened magnetic tipsVersions:y1366/01 - Phillips No. 0 / PH0y1366/02 - Phillips No. 1 / PH1y1366/03 - Phillips No. 2 / PH2y1366/04 - Flat 1.2 x 8 x 325 mm
6065 Mielke steel shaft for all carburetors (exc. WT-(813), with stronger spring
Genuine Mielke spare/option part.Steel shaft with reinforced spring. Optimizes the gas path absorption in the braking phase.Contents:1 piece
y0037/05 Allen key bit 1/16
High quality bit made from S2 steel by KS-Tools. Fits the Allen screw on the throttle lever of our ball raced carbs and the screws for the ball joints on GPM trailing arms SB014L.Content:1 pieces
7374 FG Carburetor horn for CY / Zenoah / Fuelie
Genuine FG spare/option part.Contents:1 piece
y1367 TURBO-TWIST 325 mm special carburetor screw driver
TURBO-TWIST, 325 mm long screw driver in top quality. Allows you to set the carburetor on almost any 1:5 / 1:6 model also with a mounted body shell.On most models, you have to adjust the motor with this screwdriver does not even stoop.Caution:May differ from picture!
y1362 Zenoah carburetor body for WT 603/668/668A
Genuine Zenoah carburetor bodies, direct replacement for the used part.Available versions:y1362/01 - for WT 603y1362/02 - for WT 668y1362/03 - for WT 668A
TT1102 Top Tuning isolating carburetor riser plate
Genuine Top Tuning spare/option part.The carburetor riser plate is made from 2 mm FRP; it improves the isolation of the carburetor against engine heat and strengthens the carburetor installation.Contents:1 piece
7366/10 FG Throttle valve shaft steel for carburetor - set
Solid steel throttle valve shaft, carburetor lever with optimized carburetor reguation. Set contains throttle valve shaft, carburetor lever, stop and 3 pcs. screws.
y0037/06 9/64 Allen key wrench
9/64 Allen key wrench for the imperial size mounting screw of the carburetor heat sink on Walbro carbs.
y0037/02 Steel shims 8 x 5 x 0.3 mm
Genuine HT spare/option part. Custom made steel shims.Part is delivered in silver or black color from vendor!Dimensions:Inner diameter: 5 mmOuter diameter: 8 mmThickness: 0.3 mmContents:5 pieces
7366/08 FG Throttle shaft for CY / Zenoah
Genuine FG spare/option part.Contents:1 piece
7365/01 FG Valve inlet for Walbro carburetor
Genuine FG spare/option part.Contents:1 piece
7372 FG Cover for all CY und Zenoah engines
Genuine FG spare/option part.Contents:1 piece