7366/10 FG Throttle valve shaft steel for carburetor - set

€29.70*

Prices incl. VAT plus shipping costs

Available

This product is currently not available.

Product number: fg_7366_10

EAN: 3410564517512

Product information "7366/10 FG Throttle valve shaft steel for carburetor - set"

Solid steel throttle valve shaft, carburetor lever with optimized carburetor reguation. Set contains throttle valve shaft, carburetor lever, stop and 3 pcs. screws.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

y7366/14 E-clip for throttle shaft

Fits the throttle and choke shaft on Walbro carbs like installed on Zenoah G230, G240, G260, G270, G320 and all Chung Yang, Fuelie and Losi engines.Content:one piece

€1.40*

Similar products

7373 FG Pump for CY / Zenoah

Genuine FG spare/option part.Contents:1 piece

€9.90*

TT1031 TopTuning Carburetor heat sink for all Zenoah/CY/HPI/Losi and PT (Smartech!) engines

Original TopTuning spare/option part. Carburetor heat sink for all Zenoah/CY/HPI/Losi and PT-Smartech/Carson engines.Fits all Walbro 603/813/990/771/527/1107 carburetors as well as all Smartech/Carson PT engine carburetors and many more!The TopTuning carburetor heat sink counteracts the notorious vapor lock at high engine temperatures.In fact all current large scale engines have a special adaptor for the thermal insulation of the carb (isolator) to keep the carb as cool as possible, so that the fuel does not form bubbles due to heat transfer from the cylinder. And without this isolator the gasoline would literally cook after a short operating time and therefore the engine would receive a leaner mixture. The much feared lean-out until the engine stalls is inevitably.Unfortunately, even a special isolator is often insufficient at higher ambient temperatures or when the engine is subjected to higher loads, e.g. in racing. In such scenarios the better heat dissipation of the Top Tuning carburetor heat sink contributes to the solution of the problem.The easy to install heat sink, requires a considerable manufacturing and milling effort and fits easily to all common 1:5/1:6 large scale cars, such as FG, Mecatech, Smartech/Carson, HPI, Losi, etc..For installation in FG 4WD cars the rear cross member # 66212 must be modified.Attention: the Allen head screw is an imperial size and therefore not compatible with metric Allen wrenches! Available in our options menu Content: Carburetor heat sink 1 x Allen head screw #8-32 x 5/8" (for Walbro carbs) 1 x washer 4 mm

€39.90*

7375 FG Carburetor screw for CY / Zenoah / Fuelie

Genuine FG spare/option part.4-40 UNC x 1/8"Part is delivered in silver or black color from vendor!Content:1 piece

€3.20*

y1366 TURBO-TWIST 325 mm special XXL screw driver

y1366 Version: y1366/03 - Phillips no. 2 / PH2

TURBO-TWIST, 325 mm long screw driver in top quality.Allows easy access to hard-to-reach screws in any 1/5 & 1/6 car.Features:Soft Grip handlesExtra long 325 mm shaftChrome Vanadium hardened and tempered bladesBlackened magnetic tipsVersions:y1366/01 - Phillips No. 0 / PH0y1366/02 - Phillips No. 1 / PH1y1366/03 - Phillips No. 2 / PH2y1366/04 - Flat 1.2 x 8 x 325 mm

€6.90*

7370 FG Diaphragm for CY / Zenoah

Genuine FG spare/option part.Set includes diaphragm and gasket.Contents:2 pieces

€32.90*

7366/11 FG Throttle valve shaft steel - 1pce.

Spare part for 7366/10

€18.70*

This product is currently not available.

y0037/01 Ball bearings, sealed type 2RS (3/16"x5/16"x1/8")

Genuine HT spare/option part. Ball bearings, sealed type 2RS (3/16x5/16x1/8).Content:2 pieces

€12.90*

7363 FG Diaphragm for all CY und Zenoah engines

Genuine FG spare/option part.Contents:2 pieces

€17.50*

y1615 Shims 10 x 20 x 0,3 mm

Genuine HT spare/option part. Part is delivered in silver or black color from vendor!Contents:10 pieces

€5.00*

7377/81 FG Choke locking ball with spring - set

Spare part for Zenoah G230RC, G230RC 04 and G260RC.Ball diameter 3.2 mmSpring outer diameter 3.1 mm x length 5.5 mm

€3.20*

TT1102 Top Tuning isolating carburetor riser plate

Genuine Top Tuning spare/option part.The carburetor riser plate is made from 2 mm FRP; it improves the isolation of the carburetor against engine heat and strengthens the carburetor installation.Contents:1 piece

€12.90*

7366/08 FG Throttle shaft for CY / Zenoah

Genuine FG spare/option part.Contents:1 piece

€19.90*

Customers also viewed

Mielke 5646/01 Clutch shoes aluminum for Power Gearshift II clutches, set of 3

Genuine Mielke spare/option part.Clutch shoes for Mielke Power Gearshift II clutches part numbers 5640, 5641 and 5642.Content:3 Pieces

€44.90*

Details

y0045 GPM Crankcase cover for 1/5 & 1/6

To ensure the required cooling for current 1/5 and 1/6 engines the flywheels have fins on both sides. Therefore the fan housing has large openings on the crankcase side for the required air supply. However, the risk of foreign objects (grass, sand, or even stones!) entering here Is very high! As a result, broken fins on the flywheel occur frequently. This leads to reduced cooling efficiency and - even more critical vibrations from a flywheel which is out of balance due to missing fins. Therefore, this kind of flywheel protection is highly recommended, especially for offroad use. The product video explains the handling in detail! Note:It is essential to thoroughly clean and degrease the crankcase prior to attaching the hook-and-loop tape (OKS2661)!For installation on Chung-Yang and Zenoah engines in FG cars, the crankcase cover must be slightly modified in two places where the engine mount is attached (see Figure 6 and 7). Furthermore the fit of the fabric must be as tight as possible in the region of the layshaft pinion (in front of the differential ring gear!) (see Figure 8).Set includes:Special tailored fabric with sewed on hook-and-loop tapehook-and-loop tape for installation to the crankcaseAdhesive for securing the hook-and-loop tape

€24.90*

y7366/14 E-clip for throttle shaft

Fits the throttle and choke shaft on Walbro carbs like installed on Zenoah G230, G240, G260, G270, G320 and all Chung Yang, Fuelie and Losi engines.Content:one piece

€1.40*

7766 FG Throttle shaft for Zenoah

Genuine FG spare/option part.Contents:1 piece

€27.50*