Product information "5189 FG Porsche 911 GT3R body shell, Wheelbase 530 mm, painted"
Fits on all standard width touring car chassis' with 530 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan.
Genuine HT spare/option part.Fits 535 mm wheel base, current touring car width. A rear wing is available through the shop's options menu. The body shell comes without decals!Required body mounts:Front section: FG 7020/11 Front bumperRear body mount: FG 7152/01 Rear body supportSide front: FG 7012 Body mountSide rear: FG 7014 Body mountAvailable decal sheets:y1329 - Vehicle decalsy1320/01 - Team decals Posty1329/02 - Team decals Samsungy1329/03 - BMW-Bank decalsy0683 - Jägermeister decalsy3006 - rc-car-online decalsDimensions:Length: 885 mmWidth: 392 mmHeight: 260 mmWheel base: 530 mm
The Set contains the front body, the main body, the rear body, the spoiler-set and the body screws. The body shell is vac-formed from 2 mm Lexan.The body shell does not come with drilled mounting holes to make it possible to fit any 1/5 car with 530/535 mm wheelbase. The set is delivered as shown.Required body mounts:Mount front: FG 7020/12 Front bumperRear body mount: FG 7152/01 Rear body mount Side body mount front: FG 7014 Body mountsSide body mount rear: FG 7014 Body mountsMeasures:Length: 890 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mm
Rare itemFord Capri Zakspeed RS 1/5 top quality body shell set, fits 1/5 touring cars with a wheelbase of 530mm.The body shell set includes main section, front air dam, rear section, rear wing and a pair of rear wing brackets with all necessary screws. The set is delivered with RS Zakspeed painted. Required body mounts: Rear side: 9014 FG Body mounts Front side: 3014 FG Body mounts Rear: 2x 7152/01 FG Extended rear mount Front pumper: 7020/14 FG Front bumper Front: 2x 7155 FG Body mount short adjustable Dimensions:Length: approx. 940 mmWidth front: approx. 390 mmWidth rear: approx. 415 mmHeight: approx. 230 mmContent:1 set
Unfortunately, the pin striping lines on the body shell have not been applied very carefully and should be reworked individually, if you place value on it. The body shell is vac-formed from 2 mm Lexan.Measures:Length: 890 mmWidth: 392 mmHeight: 220 mmRequired body mounts:Mount front: FG 7020/16 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 8013 Body mounts Side body mount rear: FG 3014 Body mounts
Fits on 2WD touring car chassis' with 535 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan.Due to the low body shell, you need the low height FG airbox # 9043.Complete painted for 1/5 scale for 530/535 mm wheelbase. With rear wing, mirrows and decals.Required body mounts: Mount front: FG 7020/14 Frontrammer Rear body mount: FG 7155 Karosserieauflage hinten Side body mount front: FG 3014 Karosseriehalter Side body mount rear: FG 3014 Karosseriehalter Contents:1 piece
The set is delivered with Jägermeister painted. The body is not drilled and fits all 1/5 scale fabricate with a wheelbase of 535 mm.For additional cooling of the motor, there is the option of selecting a cooling air duct in the shopping basket selection.Required body mounts:Mount front: FG 7020/12 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 7012 Body mounts Side body mount rear: FG 7014 Body mounts Measures:Length: 890 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mm
Painted Audi RS5 DTM body shell with Team Audi-Ultra paint sheme for 1/5 cars with 530/535 mm wheelbase.With rear wing, flaps and decal sets for car and Audi Ultra paint sheme.This Audi RS5 DTM body shell is also available clear with part number y1441.Required body mounts:Mount front: FG 7020/14 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 3014 Body mounts Side body mount rear: FG 3014 Body mounts / for 4WD: FG 7014/02 Body mount
The body is cut out, painted but not drilled to fit all 1/5th scale (wheelbase 530/535 mm) touring cars. Samba has decided to produce a new touring car body to offer a new car from the WTTC series for the 1:5 drivers. Currently the most requested big scale body with optimal aerodynamics
1.5 mm material thickness. This is offered without a rear spoiler.The body consists of one part.
Width front / rear: 392 mm. Contents:
1 pieceSee photos for scope of delivery and paintwork.
Genuine FG spare/option part. Factory painted Audi A4 DTM, "Albers" design with decals applied. The body shell is vac-formed from 2 mm Lexan.Required body mounts:Mount front: Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 935 mmWidth: 392 mmHeigth: 240 mmWheelbase: 530 mmContents:1 piece
Painted Audi RS5 DTM body shell with Team Audi-Jägermeister paint sheme for 1/5 cars with 530/535 mm wheelbase.With rear wing, flaps and decal sets for car and Jägermeister paint sheme.The body shell does not come with drilled mounting holes to make it possible to fit any 1/5 car with 530/535 mm wheelbase.This Audi RS5 DTM body shell is also available clear with part number y1441.Required body mounts:Mount front: FG 7020/14 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 3014 Body mounts Side body mount rear: FG 3014 Body mounts / for 4WD: FG 7014/02 Body mount
The legendary sports car Bugatti EB 110 body shell for 1:5 on-road cars with standard chassis width and 530/535 mm wheelbase. The body shell is vac-formed from 2 mm Lexan.Painted lexan body shell; thermoformed from 1.5 mm material. The body is cut and drilled, thus suitable for 530mm wheel base.Dimensions:Total length approx. 870 mmTotal width approx. 380/385 mmTotal height approx. 220 mmRequired body mounts:Mount front: FG 7020/14 Front bumper Rear body mount: FG 7154/01 Rear body mount Side body mount front: FG 8013 Body mounts Side body mount rear: FG 3014 Body mounts The body support FG 7154/01 is screwed directly onto the rear bridge. For attachment to the rear bridge, 2 holes 4 mm must be drilled in them.As a detailing kit (mirrors, windshield wipers!) set # 5435 is recommended (not included!).Since the Bugatti EB 110 1:5 scale body is - just like the original very low, a very low height air filter (#9043) is required. We also recommend 9.5 mm wide wheel squares: #6107 wheel squares 9.5 mm/M6 - 2pcs.For the body side support #32781 is requires, as is #2152/02 for the rear
Genuine HT spare/option part. Fits chassis with 535 mm wheelbase, standard touring car width. Set of flaps included. The body shell is vac-formed from 2 mm Lexan.This body shell comes without pre-drilled mounting holes, it can be installed on all FG standard width touring car chassis' with 530/535 mm wheelbase.Set contains:FG 4149 Body shell A4: 180,-- EURFG 4153/01 Car decals: 24,90 EURFG 4153/02 Window masking: 6,55 EURy0683 Big decals Jägermeister: 22,90 EURSurcharge Jägermeister painting + glueing the decals: 163,20 EURRegular price: 397,55 EURRequired body mounts:Mount front: Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 935 mmWidth: 392 mmHeight: 240 mmWheelbase: 530 mmContents:1 piece
The body shell is made from white colored polycarbonate. Without any decals.Required body mounts:Mount front: Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 890 mmWidth: 405 mmHeight: 240 mmWheelbase: 510 mm
Genuine FG spare/option part.The Set contains the front body, the main body, the rear body, the spoiler-set and the body screws. The thickness of the body shell is 2.0 mm and fits for Sportsline models. The body shell is vac-formed from 2 mm Lexan.The set is delivered unpainted.Frontteil: 5172 FG Porsche GT3 RSR body, front sectionHeckspoiler: 5173 FG Spoiler set Porsche GT3 RSR transparentRequired body mounts:Mount front: Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 890 mmWidth: 405 mmHeight: 240 mmWheelbase: 510 mmPainting tips:
Fits on all standard width touring car chassis' with 530 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan.Rear wing available in the options menue. Replacement parts: 5192 FG Front Porsche 911 GTR3 R clear 5193 FG Rear Wing Porsche 911 GTR3 R clear Required body mounts:Mount front: FG 8418 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 3014 Body mountsSide body mount rear: FG 3014 Body mountsDimensions:Length: 940 mmWidth: 415 mmHeight: 230 mmWheelbase: 530 mm Painting tips:
The Mecatech FW01 is for sure the currently most innovative 1/5 race car designed for the dedicated and technically enthusiastic rc car driver.Everyone is enthusiastic about the perfectly fitting and precise workmanship at the highest level. Only high quality materials are used for the production.Since many years Mecatech is a well-know premium manufacturer of largescale hydraulic brakes or shocks and, as only a few may know, a technology expert for a number of Formula 1 racing teams!The Performance Kit from the FW01 is particularly intended for "racer" and differs from the Chassis Kit model by the Performance Kit. Here the list of parts are not including:DifferentialEngine Clutch, Airbox and tuned pipe systembody shell and tiresElectonic components such as servos, batteries and Remote controlPerformance Kit :engine brace left and rightfront stabilizer bar 2.75 mm titanium ready for installationrear stabilizer bar 1.75 mm titanium ready for installationthe two 80 gram front weightsthe two smaller 80 gram center weightsWith the Performance Kit the vehicle is quasi equipped as used at races!Stock gearing:Clutch pinion / spur gear: 36T / 64TLayshaft pinion / differential: 24T / 73TCurrently the Mecatech FW01 is for sure the benchmark of the 1/5 scale racing scene! In the first year Markus Feldmann won with his FW01 1: 5 Mecatech on one of the world's finest and most demanding race track in Lostallo / SwitzerlandMecatech is multiple German, European and World Champion with the FW01 and as the last result:Markus Feldman wins the European Championship in Tourlaville/France. All top 5 positions went to drivers running a Mecatech FW01. 7 out of 10 finalists cars were Mecatech FW01.Although the fit of the Mecatech FW01 parts makes the assembly of the car a great experience, some of our customers want to use the expertise of our shop and wish their FW01 fully assembled and tuned in by us! The complete assembly of your FW01 by our workshop is possible for an additional charge. Please note that the costs of the full assembly with servos a.s.o. do not include the price of any rc-components. If you do not have a suitable radio system with servos and batteries as well as switch and charger, you have to take an additional EUR 800 to EUR 1,500 for this equipment into account. We will be happy to make you an appropriate offer. We are currently waiting for the latest version of the Mecatech FW01. The following components are not included in the Performance Kit not and can be selected individually through the choice of options: engine, clutch, exhaust and airbox, differential gear, body shell and wheels. Not included are all relevant components for remote control! included in the kit:clutch bellbell pinionshaft and screw for clutch installationdifferential spur gearnot included:differentialbody shellairboxrear wingengineelectronicstiresclutch We are currently waiting for the latest version of the Mecatech FW01.