Samba 4110 for Off-Road and monster models 2WD/4WD tuned pipe
€199.90
1-3 days
Product information "Samba 4110 for Off-Road and monster models 2WD/4WD tuned pipe"
Samba announced this pipe as the monster model / Off-Road pipe, but it fits Beetle/Pajero/Monster Beetle/Monster Truck and 2WD/4WD FG models as well. Will fit Carson CPT as well with some minor modification to the body shell in the bed area.
The large distance between pipe and tire is a big advantage especially for the Monster models. The mounting wire is already bent into the correct shape for easy installation.
Complete system with steel manifold and hardware for installation included.
Content:
- 1 set
Login
Accessories / Spare parts
Wire diameter 2.5 mm, cut and bend as needed.
Measures:Total length: 55 mmLength of coils: 25 mmWire thickness: 1,25 mm
Protects against vibration and dirt which could jeopardize the spring. The spring is not protected by the rubber tube only, but also relieved.product contents: 2 pcs.
Genuine Samba spare/option part.Silikon, 20 x 25 x 2.5 mm, fits Masterfix and Steel PowerContents:4 pieces
Genuine Samba spare/option part.Contents:2 x Replacement spring y03764 x O-ringe 20 x 24 x 2 mm
Includes:1 x Retaining wire y03931 x Hose clamp 28 - 39 mm1 x Grub screw M5x 6 mm
included:2 x Replacement spring y03764 x O-ringe 20 x 25 x 2,5 mm
Especially for installation of all engine gaskets. Temperature resistant from -55 °C to +200 °C. Resistant to water, mineral oils, synthetic lubricants, fuels, organic solvents and refrigerants. info: Hand tight: 10 - 20 minReady to use: 1 - 3 hoursGap fill: 0.5 mmContent: 50 ml Notes for usage: This surface seal is not for use as the sole sealant, it should always be applied in combination with a paper gasket.The HT-surface sealing agent should be sparsely applied over the entire surface, with care being taken that the sealant does not enter the devices internals (e.g. crankcase, differential a.s.o.) during the assembly.
Content: 50 Milliliter (€538.00 / 1000 Milliliter)
Customers also viewed
Genuine FG spare/option part. Newly developed tuned pipe made of strong steel sheet, with plug connecting system. The pipe mounts close to the car for best protection possible and versatile usability. Suitable for:FG 2WD and 4WD 1:6 Off-RoadSmartech 2WD off-road And for many other brand's 1/6 carsNot suitable for:FG Leopard2 2+4 WD Sportsline and CompetitionOn several pictures the pipe is shown with a silicone tube tailpipe extension, which is not included. It can be ordered separately as an accessory with part number 6299/03 or y0995.Content:1 piece
Genuine rc-car-online spare/option part.The optimal parking lot or race tires for your FG Racetruck model.Type Width Outer diameterFront 64 mm 153 mmRear 78 mm 153 mmGlued on original FG-Racetruck rims (rear tire with extension to the inside), incl. foam rubber insert,FG rim with 18 mm square drive and reinforcement ring.Attention: From experience we warn against using rims and extensions from another manufacturer.Since the Mammoth tires provide a very good grip, the rim and bonding are extremely stressed. Due to the high torque load in relation to the bonding of tires on large models, an occasional check in this regard and possibly a repair of the bonding (y0067) is inevitable.As a recommendation:The dirtier the track or the colder the temperature, the softer the rear tire should be.Reference for the front tire: With 2WD models this should be one to two stages harder than the used rear tire. On 4WD models, a tire combination with the same shore hardness front and rear is often good to drive.Of course, with Mammoth Supergrip Racetruck tires, the softer the tire, the higher the wear.The Mammoth Supergrip Racetruck tires have a special onroad tread. Whereby these still have an optimal grip after the wear of the tread, and can still be driven for a long time.