R109 UFRC Motor pinion

Genuine Losi spare/option part.Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini WRC.Dimensionally identical with B55029Contents:1 piece

Genuine Top Tuning spare/option part. Motor pinion made of nitrided hardened steel, module 1.5 and 8 mm bore. Reinforced hub for set screw M5x6. The pinions with odd tooth counts are profile shifted. Within the same outer diameter, there is no need to adjust the backlash when changing the pinion. When mounting on vehicles with mounting holes in the motor mount that are specific to the tooth count, the mounting holes for the higher number of teeth in each case (16 or 18) must be used.Profile regraded:This means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn´t really matter. Available in two sizes with two tooth counts:Outer diameter 30 mm with 17T or 18TOuter diameter 27 mm with 15T or 16TContents:1 piece

Item N° 6432 Steel pinion 18 teeth - 1pce.For combination with 46T main spur gear.Diameter 29,7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5

Genuine Top Tuning spare/option part. Motor pinion made of nitrided steel, module 1 (such as for ARRMA cars) and 8 mm bore. Reinforced hub for set screw M5x6.The 26T pinion is profile shifted. Within the same outer diameter, there is no need to adjust the backlash when changing the pinion.Profile regraded:This means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother.Outer diameter 30 mm, Tooth width 13 mm, 26T or 28T.Contents:1 piece

Steel pinion 16 teeth suitable for 46 mm main gear for FG models.Modul 1,5