T4986 Pirate Monster MX 4WD 1/10 XL, RTR

Technical specificationsPolycarbonate body, fully painted and decorated4 LEDs (2x white front, 2x red rear)Wheelie bar system rearGearbox and differentials under waterproof protective housingAll-road tiresFully ball-bearing drive suitable for Li-Po 3SMedium steel drive shaft with protective housingComposite plastic chassis: grooved tub chassis with front and rear aluminum connecting partsHydraulic shock absorbers with aluminum housing and spring adjustmentFront and rear adjustable shock mountsRear drive shafts made of hardened steelBrushless motor 3652 3000 kV.Adjustable aluminum motor mountMotor pinion with waterproof protection50A WP-10BL50 front-rear brake controllerAdjustable slipper system3S 3500mAh LiPo battery with charger includedQuick battery pack attachmentAdjustable toe and adjustable front camber via reverse threaded rods, adjustable rear camberFront pivot ball control armsFront joint drive shafts made of hardened steelIndependent suspensionLower control arm mounts made of aluminumRC systemBuilt-in 2-channel 2.4 GHz RC systemFailsafe function Protective box for receiver4 AA 1.5V batteries are required for the transmitter (not included)Dimensions:Length: 470mmWidth: 335mmWheelbase: 275mmHeight: 200mmWheel diameter: 125mmWeight: 2.7kg

This fully pre-assembled 1:18 scale model with four-wheel drive and two differentials is equipped with a brushless motor.  Up to 18 minutes of driving fun on a single battery charge.  Up to 40 km/h top speed.  Thanks to its robust chassis, proven design, hydraulic shock absorbers and versatile tyres for different surfaces, the Pirate Monster-T can easily drive at high speeds.  • Ventilated chassis to protect the RC equipment, motor and gearbox.  • Independent 4-wheel suspension and double wishbones.  • 4x4 drive with central metal cardan shaft.  • Four hydraulic shock absorbers.  • Rollover protection wheels.  • Powerful brushless motor.  • Front and rear bumpers.  • Speed controller (30–100%). • LEDs.  • Metal differential gear at the front and rear.  • Versatile multi-purpose tyres.  • 2.4 GHz radio remote control with ergonomic transmitter with joystick/trigger. Model dimensions:  • Length: 210 mm  • Width: 175 mm  • Height: 95 mm  • Weight: 495 g  • Wheelbase: 175 mm Additional information: • 7.4V 1050mAh Li-Po battery pack and USB charger included. • Requires 2 x 1.5V AA batteries for the transmitter, not included. • Recommended minimum age: 14 years.1 Set

Product DetailsAlong with legendary toughness, the ARRMA MOJAVE GROM RTR desert truck offers the most accurate scale looks available in a mini size. Amp up your bashing with its thrilling Baja realism — and take its performance to the extreme with ARRMA upgrade parts!Key FeaturesHigh-traction 4WD drivetrainPowerful Spektrum 2S LiPo battery and safe, easy-to-use Smart chargerEnclosed metal gear drivetrain for all-terrain toughnessImproved V2 front and rear differentialsEasy clipless body attachment and high-quality hex hardware In The Box(1) ARRMA MOJAVE GROM Small Scale 4X4 Desert Truck RTR(1) Spektrum Waterproof SLT 2-in-1 25A ESC & Receiver(1) ARRMA MEGA 380 28T Brushed Motor(1) Spektrum 2.4GHz SLT2 Transmitter(1) Spektrum SX110 Waterproof Metal-Geared Servo(1) Spektrum Smart 7.4V 1400mAh 2S 30C Hard Case LiPo Battery w/IC2(1) Spektrum S10 Smart G2 Mini 2S USB-C Charger(4) AA Transmitter Batteries(1) Hex wrench(1) Instruction Manual Needed to Complete(1) USB power adapter with QC 2.0/3.0 18W+OverviewOff-road racing puts full-size desert trucks through brutal tests of performance and endurance. RC model versions face their own moments of truth during no-holds-barred bashing. But those from ARRMA come prepared with legendary toughness — including the small scale MOJAVE GROM 4X4 Desert Truck.With its detailed desert truck looks, the ready-to-run MOJAVE GROM captures the thrills of Baja-style action for bashers of all experience levels to enjoy. Agile and responsive like the 4S and 6S MOJAVE vehicles, the small scale MOJAVE GROM delivers all the performance and durability that ARRMA fans have come to expect. However, you can take this one with you almost anywhere, for amped-up ARRMA bashing fun anytime you like.Indoors and outdoors, the MOJAVE GROM goes places that are off-limits to larger RC desert trucks. And it’s still engineered to the same high standards as other ARRMA vehicles. No compromises were made when reducing the size. With its smooth handling and tackle-anything toughness, you can be as aggressive as you like when you send the MOJAVE GROM through the corners and over the jumps.Built for endurance, the MOJAVE GROM survives any punishment you and the environment can dish out. Its strong composite chassis is ventilated to help on-board components keep their cool, aided by a high-speed fan integrated into the electronics. Robust metal gears support the rugged 4WD drivetrain. Oil-filled shocks soak up bumps. A MEGA 380 brushed motor sends power through an enclosed drivetrain to four dBoots Fortress tires that turn it into high speeds.Even the Spektrum SX110 steering servo has metal gears — and it’s waterproof, like the Spektrum SLT 2-in-1 25A ESC and receiver, for trouble-free operation in any conditions. If you’re a first-time RC basher, the Spektrum 2.4GHz SLT2 transmitter helps you learn control skills safely by limiting maximum speed to 50% or 75% until you’re ready for it all. Recharging the Spektrum Smart 2S LiPo battery is also a snap. Just plug it into the Spektrum S10 Smart G2 Mini 2S USB-C Charger with the attached IC2 connector. In about an hour, your battery is safely recharged and ready for more fun.The sleek MOJAVE desert truck body comes finished in eye-catching red/black or blue/white color schemes. It mounts to the chassis with a secure but clipless quick-release mechanism that even young kids can manage easily. The wheels are color-coordinated with the body, and high-quality hex hardware is used throughout the vehicle for reliability and simplicity.You’ll find everything you need to the run the MOJAVE GROM inside the box. ARRMA upgrade parts are also available for expanding its capabilities, including a Metal Axle & Wheel Hub Set (ARA311231), Aluminum Shock Set (ARA-1567), Adjustable Steering Links (ARA340217), and a two-piece, assembled Oil-Filled Differential Set (ARA311193).Experience small scale RC bashing in a big way with the affordable ARRMA MOJAVE GROM — a bash-ready mini filled with desert truck detail.FeaturesHigh-traction 4WD drivetrainMOJAVE desert truck styling with two color scheme optionsPowerful Spektrum 2S LiPo battery and safe, easy-to-use Smart chargerEasy, quick-release clipless body attachment and removalReliable, high-quality hex hardwareEnclosed metal gear drivetrain for all-terrain toughnessUpdated V2 front and rear differentialsDurable composite chassisIndependent suspension and oil-filled, coil-over shocks25mm cooling fan and motor heatsinkTough dBoots Fortress tires on body color-coordinated wheelsImpact-absorbing front and rear bumpersSpektrum SLT2 2-channel 2.4GHz radioSpektrum SLT 2-in-1 25A waterproof ESC and receiverSpektrum SX110 waterproof metal-geared servo2-Year limited warranty (see website for details) BASH-ANYWHERE SMALL SCALE SIZEThe ARRMA MOJAVE GROM 4X4 Desert Truck RTR is engineered and manufactured to the same high standards of durability and performance that you expect from any ARRMA vehicle. It’s just smaller! MOJAVE DESERT TRUCK LOOKSOut of the box, the desert truck body comes factory-finished in two exciting color scheme options. It captures the unmistakable looks and form of the original MOJAVE in small scale size. The dBoots Fortress tires add all-terrain traction and are mounted on tough color-coordinated wheels. CLIP-FREE BODY ATTACHMENTThe MOJAVE GROM desert truck body snaps onto the chassis easily, quickly, and securely. It comes off with a simple press-and-release. With no tiny clips to force into place, it’s a body attachment system that’s perfect even for young bashers. RUGGED 4WD DRIVETRAINThe enclosed drivetrain with rugged metal gears carries power from the installed MEGA 380 brushed motor to all four wheels for high traction. The entire power system is well-protected for dependable performance on all terrain. UPDATED V2 DIFFERENTIALSThe MOJAVE GROM is equipped with new V2 differentials front and rear. The V2 differentials are improved with metal internal gears and cross pins to better handle any future power upgrades. TOUGH METAL GEARSEnjoy carefree bashing in any conditions with your MOJAVE GROM desert truck. The drivetrain is metal geared for durability. Even the installed Spektrum SX110 waterproof steering servo has tough metal gears. FAST, SAFE BATTERY CHARGINGThe Spektrum Smart 2S LiPo battery with IC2 connectors provides the power for long run times. When it’s time to recharge, just plug it into the convenient Spektrum Smart G2 S10 USB-C Charger. Safe charging begins automatically and takes only about an hour. EASY-TO-USE SPEKTRUM 2.4GHz SLT2 TRANSMITTERThe high-quality Spektrum SLT2 2-channel transmitter is the perfect size for all drivers. It can help you learn control skills safely by limiting the vehicle’s maximum speed to 50% or 75% until you’re ready for it all. Four AA batteries included.

To celebrate the 30th anniversary of the legendary Marder 1/6 scale 2WD buggy, FG Modellsport/T2M releases a special edition, limited to 300 numbered pieces, with the original signature of Franz Gröschl on the sticker sheet as well as a top equipment (G260RC Zenoah engine, hi-capacity low friction aluminum shock absorbers and special aluminum engine mounts). with original 260 Zenoah with Low-Friction Alu shocks with alloy enginemount The Models is built on a 4 mm u-bended chassis. All borings of the lower side are countersunk, therefore the screw heads can't bear out.Double wishbones at font and rear axle as well as 4 bulk oil-pressure shock absorbers guarantee perfect ground adherence. All rotating parts are supported by ball-bearings. Rear gear wheels, differential gears and all driving elements are case-hardened. The side guards protect the model from dirt. With original signature of Franz Gröschl. The model is equipped with a powerfull 26 ccm engine which runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 liters enables you to drive about 45 minutes. The engine can be started without difficulties through the integrated pull-start. To complete the models all merchantable servos and radio control systems are suitable.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery

The FG Sportsline Formula 1 electric convinces not only by its appearance, but rather by its technical achievements. The unique details such as push rods, horizontal oil pressure shock absorbers, double wishbone and much more can be found in almost no other model.The chassis is built on a high-strength 5mm aluminum chassis plate and thus offers extreme stability. Countersunk holes in the chassis plate allow the screws to be flush, ensuring a flat surface under the model. Versatile adjustment options on the front and rear axles allow the model to be perfectly adapted to your own needs. Adjustments such as camber, caster, etc. are no problem whatsoever, even for beginners, and are made via the double a-arms, which provide maximum stability at the rear axle by means of additional track rods. Also the adjustable aluminum oil filled shock absorbers convince on full length and offer maximum performance even on a very difficult underground. The above mentioned push-rod suspension enables play-free power transfer from the suspension to the shock absorbers, which is essential for precise driving.The factory-mounted combination of 980KV motor and 160A MAX6 esc provides performance that is second to none. With a 6S 22.2V (4S 14.8V is also possible) LiPo batteries, the motor reaches a final speed of about 25,000 rpm, leaving a comparable combustion engine far behind. The braking is done by the 980KV motor and is very strong. Within a few meters the model comes from top speed to a standstill. Those who have searched in vain for reverse gear with a combustion engine will find it with the electric version. The operation is very easy, if you press the brake lever once, you hit the brakes. If you press the brake lever twice, you shift into reverse. With the help of a programming card (available separately) you can adjust all ESC values according to your needs. This includes setting options for power, brake force, low-voltage protection and much more. Furthermore, the model has the following technical: Features: 160A MAX6 esc, 6S compatible (4S also possible) 980KV brushless motor Waterproof components Adjustable aluminum oil filled shock absorbers Aluminum levers for the shocks Aerodynamic Lexan body shell 5mm thick aluminum chassis plate Mounting compartment for steering servo Mounting compartment for separate brake servo (for mechanical/hydraulic brakes) Cogged belt drive Side battery mounts for optimal weight distribution Custom CNC machined motor mount Unique double a-arms Push rod suspension Treaded F1 tires Tuning ball drive shafts Dimensions: Length: 960 mm BrWidtheite: 440 mm Height: 230 mm Wheelbase: 620 mm Technical data 980KV brushless motor: Max. Voltage: 33V Max. Current: 130A Max. Speed: 30.000RPM Power in watts: 4250W Rotor poles: 4 No-load current: 2.8A Resistance: 0.0128 Length: 82mm Diameter: 55 / 58mm with fins Weight: 880g Shaft diameter: 8mm Free shaft length: 30mm Weight: 880g Technical data Max6 esc: Continuous current: 160A Peak current: 1050A Battery: 3S - 8S LiPo or 9-24 cells NiMH BEC: 6V/7,2V - 3A/6A Abmessungen:70x56x46,5mm Weight: 240g Note: In our online shop you can also find a detailed 360° illustration, where especially the technology of the FG Formula1 electric chassis can be seen.Note battery mounting:When mounting the l/h side LiPo battery, you must always make sure that it does not rub against the drive pulley. For this purpose, a 5 mm thick piece of foam mat or something similar between battery and battery holder is sufficient to ensure an appropriate distance. For driving you still need: 2 drive batteries incl. charger Battery dimensions maximum: Length 143 mm/5,6 Width 48 mm/1,9 Height 40 mm/1,6 Connector EC8 The RTR equipment (remote control and steering servo!) The body shell comes unpainted! In our online store you can use our store configurator (shopping cart selection / options menu) to add the desired parts, as well as the completely painted body. Formular 1 models in action!

Pirate Desert Short Course Truck 1:7 4x4 6S Brushless RTRSpecial features:Painted and decorated polycarbonate body.Pre-installed 4-channel radio control system (2+2) 2.4 GHzFail-safe function (automatic switch-off in the event of radio failure).With deactivatable gyro to stabilize the vehicle on slippery surfacesProtective housing for the receiver.LED strip on the roof.Versatile tires for different surfaces, large diameter (140 mm).Front and rear axle differentials with gears in waterproof housings.Front and rear bumpersAll-wheel drive completely on ball bearingsReinforced drive for 6S LiPo supply.Technical data :Headlights/rear lights, indicator140 mm tires with fabric (space-savingDifferential + central bearing made of aluminumAluminum servo saverSteering servo with metal gears (18 kg)XT-90 battery connectorsBLACK aluminum chassisESC 150 Amp (6S)Reinforced wishbonesCentral aluminum reinforcementMulti-adjustable front and rear shock absorber mountsRear cardan shafts made of treated steelBrushless motor in 4274/2000 kV Adjustable aluminum motor mountQuick attachment of the battery pack with a strap4-wheel independent suspensionFront wishbone suspensionHomokinetic cardan shafts at the front made of steelAluminum wheel nutsDimensions :Length : 770mmWidth : 380mmHeight : 270mmWeight : 7400gWheelbase : 415 mmWheel diameter : 140x50 mmAdditional information :Minimum age : 14 yearsRequired accessories:2 x Lipo battery 3SchargerTransmitter batteries (4)Scope of delivery:Assembled short course model including electronics (battery not included)Instruction manual

Inclusive: Original HPI Fuelie 26 cm³ Benzin Motory0733 Big Scale-EXTREME, adjustable 3 - shoe clutch H105/01 Tuned pipe 2.0 for HPI - Baja 5B BUILD YOUR OWN ORIGINAL,AUTHENTIC HPI BAJA 5BHPI large scale fans, we have heard you! The one and only original HPI Baja 5B is BACK and ready for you to build from the ground up! The HPI SBK collection of Self Build Kits grows with the addition of not just one, but TWO 1/5th scale HPI kits! Fans of large scale off-road RC will be super excited to build their own gas-powered 1/5th scale Buggy with the HPI Baja 5B Self Build Kit!When the HPI Baja 5B buggy was first introduced, large scale RC was very expensive and quite difficult for the average RC hobbyist to experience. Using highly durable parts and innovative design features, HPI brought large scale off-road to new enthusiasts and ushered in a new, BIGGER era of RC!Now, YOU can build and own the legend! Experience the thrill and excitement of building a car which ends up being over 80cm (nearly 32 inches) long and weighing nearly 10kg (over 21 lb)! Just install your own engine and electronics as you build the HPI Baja 5B and you'll be ready for any adventure that comes your way!With extra-tough drivetrain parts like the viscous torque differential, super-durable composite spur gear with internal damping and all-metal drivetrain, the HPI Baja 5B is ready for your 23-32cc 2-stroke engine so you can experience the joy of gas-powered RC and up to 30-minute runtimes!The HPI Baja 5B is also equipped with extra-big and super-tough suspension parts, featuring awesome HPI durability! With its expertly designed molded composite suspension plus extra-long adjustable HD shocks, and massive high impact nylon 3-piece beadlock wheels, the Baja 5B is ready for full-speed racing on any off-road circuit!The 4mm thick 6061 aluminum monocoque chassis gives the HPI Baja 5B the classic desert racing buggy look. Precisely bent into shape for maximum strength, the chassis provides the mounting points for the engine and suspension, forming the backbone of the car. Precise steering is provided by a dual-bellcrank rack and cam-type servo saver. Aluminum parts are anodized in cool gunmetal and the classic Baja desert racer clear polycarbonate body is included in the SBK kit, ready for your custom racing scheme!The Baja 5B SBK is a great addition to your HPI collection, as well as a fabulous introduction to large scale buggies!RACING CHASSIS DESIGN & LAYOUTThe narrow channel chassis made from rigid 4mm 6061 aircraft aluminum and gives the HPI Baja 5B a classic desert racing buggy look and extreme stiffness and durability. The U-shaped chassis is protected at the rear with a thick plastic skid plate for extra protection to the motor and drivetrain.The tube roll cage is made of high impact nylon and topped with a real aluminum roof to carry on the classic looks. The roll cage is fully functional and protects the motor and internals from crash damage. The roll cage, radio box, body panels, wing, undertray and gear case are all mounted with fast access clips for easy maintenance. To finish you need: Remote control with servos and receiver battery Charger Two cans of Lexan paint Features Summary Unassembled 1/5th scale Off-Road Buggy HPI RC engine 26ccm Ready for your electronics Enclosed radio box Baja desert racing body design Adjustable HD shock absorbers Monocoque chassis Low CG for superior handling Long travel suspension Viscous torque oil-filled gear differential All-terrain tires Beadlock wheels with metal insert hubs Aluminum rear shock tower Hard plastic skid plates Adjustable rear wing Quick access to all critical maintenance points Dual bellcrank steering Cam type servo saver Race spec Hex socket hardware Gunmetal anodizing Full set of rubber-sealed ball bearings Chassis Specifications Overall Length 817mm Height: 255mm Width: Front - 460mm; Rear - 480mm Tire Track (to center of tires): Front - 395mm; Rear - 400mm Wheelbase: 570mm Ride Height: 76mm Suspension Travel: Front - 95mm; Rear - 100mm Weight: 9.6kg (21.3lb) Adjustable Camber: front - shims; rear - screw Front caster: adjustable with shim 22 / 25.5* / 29 degrees (* stock) Toe-in: Front adjustable with tie rod; Rear adjustable with inserts 0-4 degrees (3 degrees stock set-up) Aircraft aluminum 6061 T6 monocoque chassis Double wishbone suspension with adjustable roll center F/R Drive system: HD metal gears with sealed gear box (8.382:1 gear ratio) Differential: viscous torque control with 4 pinion gears; sealed diff case with silicone oil Shock absorber: HD Aluminum coilover shock absorber with fully adjustable preload collar Wheel type: 3-piece beadlock design, high impact nylon material with inset heavy-duty metal hex hub