Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

Mielke Hurricane mounting hardware, 5062, set

Product information "Mielke Hurricane mounting hardware, 5062, set"

Replacement installation kit for the Hurricane system.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

68431 FG Universal joint for front axle Leopard 4, set
Solid universal joints made of hardened, high-quality steel for the front axle of Leopard 4 RTR. With ball drive and ball diff. axle. The model has a higher steering deflection and a smoother driving performance in curves if you mount this universal joint.

€158.50*

Average rating of 0 out of 5 stars

67299 FG Steel-Power Tuning pipe Leopard/Sportsline 4WD
Genuine FG spare/option part. Spare part for FG Leopard 4WD 2010. Fits for FG Sportsline 4WD 510/530.FG fuel tank #8383 along with tank mount #69238/01 is required for installation on a Leopard 4WD Sportsline. The receiver battery must be relocated as well.Mielke #5062 is required for installation of this pipe.Contents:1 set

€349.95*

Average rating of 0 out of 5 stars

8383 FG Fuel tank 800ml with quick acting closure, 1 pce.
Item N° 08383 Fuel tank 800ml with quick acting closure, 1 pce.800 ml fuel tank with snap closure, ventilating valve, fuel filter and fuel hoses.Dimensions:Lenght: 130 mmWidth: 100 mmHeight: 100 mmVolume: 800 ml

€84.70*

Average rating of 0 out of 5 stars

69238/01 FG Lower tank mount 4WD, 1:5, 1pce.
Item N° 69238/01 Lower tank mount 4WD, 1:5, 1pce.

€23.00*

Average rating of 0 out of 5 stars

6429/01 FG Upright front for 1:6 2WD models
Genuine FG spare/option part.Reinforced version with steel inlay to prevent the M5 bolts from being pulled out.Bearing seats: 22 x 7 mm.Contents:2 pieces

€39.90*

Average rating of 0 out of 5 stars

7154 FG Body mount adjustable, 1 pce.
Adjustable body mount with heigt-adjustable body support.Measures:Length 110 mmDiameter 8 mm10 mm at the baseFor all cars and body shells.

€9.95*

Similar products

Average rating of 0 out of 5 stars

Mielke 5099 O-ring 20 x 3 mm , 2 pcs.
Genuine Mielke replacement part.Set with 2 viton o-rings to seal the Masterfix connector from manifold to pipe. Isolates the pipe from engine vibrations.O-ring fits Mielke plug systems and FG #6299. Dimensions:Inner diameter: 20 mmOuter diameter: 26 mmThickness: 3 mm

€3.90*

Average rating of 0 out of 5 stars

5702 Mielke special Teflon gasket for all Masterfix systems
Special Teflon gasket, fits all Mielke Masterfix systems.Dimensions:Length: 19.4 mmInner diameter: 19.9 mmOuter diameter: 24.7 mm

€8.95*

Average rating of 0 out of 5 stars

Mielke 5082 Steel-Power manifold,
Original replacement part for Mielke.Inhalt:1 Stück

€39.90*

Average rating of 0 out of 5 stars

5090/01 Mielke Mounting for FG-EVO-Models, Set
Item-No.: 5090/1Mounting for FG EVO-Modelle, Set

€29.90*

Average rating of 0 out of 5 stars

Mielke SOS gasket set / teflon tube, 5063, set
Spare parts for Mielke Side-Power tuned pipe.Part is delivered in white or black color from vendor!

€8.90*

Average rating of 0 out of 5 stars

Mielke 5096 tuned pipe sealing set, 2 pcs.
Original Mielke sealing set for tuned pipes.

€9.90*

Average rating of 0 out of 5 stars

Mielke 5059/01 Steel manifold Formula 1 fits RS5 models
Genuine Mielke spare/option part.Fits Mielke tuned pipe with the order number 5058.

€44.90*

Average rating of 0 out of 5 stars

5194 Mielke Cross-Power Mounting set
Mounting set for Cross-Power tuned pipe for Smartech UNO and Carson Attack

€24.90*

Average rating of 0 out of 5 stars

5185/01 Mielke Manifold for 5185 Big Power
Genuine Mielke spare/option part.Steel manifold, fit Mielke Big Power with the order number 5185. Contents:1 piece

€29.90*

Average rating of 0 out of 5 stars

Mielke Hurrican steel wool packing, 5093, 1 pce.
Replacement packing for the Hurrican system.

€5.90*

Average rating of 0 out of 5 stars

Mielke 5705/01 plug manifold for 5705
Genuine Mielke spare/option part. Original replacement part for Mielke no 5705 plug tuning pipe.Contents:1 piece

€39.50*

Average rating of 0 out of 5 stars

Mielke Hurrican o-rings, 5092, 2 pcs.
Replacement o-rings for the Hurrican system.

€5.90*

Customers also viewed

Average rating of 0 out of 5 stars

y1605 SPEED TEC CRANK Team-Edition Zenoah 30,5 Tuning engine
The SPEED TEC CRANK genuine Zenoah engine is optimized for performance by hand with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC Team Edition version modifications: Cylinder & case:Adjustment of compression; enlarged ports, fuel management milled, machined and polished exhaust, the intake is flow-optimized the case is specially matched with enlarged and flow-optimized cross section towards the ports Piston:Transfer port area optimized for flow, weight reduced and the piston-roof is polishedCrankshaft:is adjusted, aligned and balancedFlywheel and ignition:Latest SPEED TEC CRANK SV ignition system for rc-car race engines with air baffles, a special balanced 62 mm diameter flywheel, modified ignition coil mount and special ignition system allows for the extremely fast revving of the SPEED TEC team edition engine and guarantees a significantly improved performance.The machined and more than 30% lighter than stock CRANK flywheel with fins on both sides contributes to the optimized engine cooling.Gaskets:Premium quality gaskets installed. Cylinder gasket installed using elastic gasket sealer.Insulator:Special matched and raised insulator Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€999.00*

Average rating of 0 out of 5 stars

7432/25 FG Steel gearwheel hardened 25 teeth
Suitable for 39, 40 and 41 teeth main gear wheel.Measures:Diameter: 38,7 mmBore: 10 mmTotal width: 18 mmTooth width: 11,5 mmModule: m=1.5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.Content:1 piece

€35.10*

Average rating of 0 out of 5 stars

4403/01 FG Front alloy uprights
Genuine FG spare/option part. Suitable for all 1:5 and 1:6 Truck models, not for Formula 1.For installation in 1:6 Off-Road models you need 7028/01. Will allow to use all FG tires. Contents:1 set

€93.40*

Average rating of 0 out of 5 stars

5702 Mielke special Teflon gasket for all Masterfix systems
Special Teflon gasket, fits all Mielke Masterfix systems.Dimensions:Length: 19.4 mmInner diameter: 19.9 mmOuter diameter: 24.7 mm

€8.95*

Average rating of 0 out of 5 stars

Mielke 5097/01 Extension spring for Steel-Power, 3 pcs.
Item N° Mielke 5097/1 Extension spring for Steel-Power, 3 pcs.Fits FG tuning pipes no. 6299/01 and 67298.

€6.50*

Average rating of 0 out of 5 stars

7103/08 FG Distance bush for front upright
Genuine FG spare/option part.The installation of these spacer bushings between the ball bearings in the uprights allows you to tighten the wheel nut strongly. Suitable for all FG plastic and alloy uprights.Dimensions:Outer diameter: 11 mmWidth: 7 mmInner diameter 8,22 mmContents:2 pieces

€3.90*

Average rating of 0 out of 5 stars

5446/01 Mielke Clutch shoes aluminum for Power Gearshift clutches, set of 3
Genuine Mielke spare/option part.Clutch shoes for Mielke Power Gearshift clutches part numbers 5440, 5441 and 5442.Content:3 Pieces

€44.90*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Theme Development