Genuine rc-car-online spare/option part. A "must have" for every run in the dark. A total of 11 different lighting effects are programmeded into this LED module. The LED strip has the same size like that of the Losi 5ive-T 2.0 and the Losi DBXL-E and can therefore replace for the OEM version in its bracket.The LED module is typically powered by the receiver battery (maximum 7.4V). Depending on the version selected, the effects are changed via the radio (requires a free channel on transmitter and receiver) or via an onboard switch.The LED strip has on the back of an adhesive strip with which it can be glued on loose on the body. In the shop's options menu you can add an optional mounting bracket for the Losi 5ive-T. Modes:Continuous whiteContinuous white 30% intensityOffKnightRider redKnightRider whiteKnightRider blueKnightRider greenPolice 1Police 2SafetyCarRainbow chaser lightStrobo-Light whiteDimensions LED:Length: 160 mmHeight: 10 mmDimension mount:Width: 160 mmHeight orifice: 8 mmHeight behind orifice: 10 mmContents:1 set

Complete set of 22 sealed ball bearings for Losi DBXL-E 2.0 and Desert Buggy XL 1/5.Set includes:16 pieces of 12 x 24 x 6 mm sealed bearings (axle shafts / differentials / clutch bell)4 pieces of 10 x 22 x 6 sealed bearings (bevel pinion shafts)2 pieces of 8 x 19 x 6 sealed bearings (intermediate shaft)Total: 22 sealed bearingsPrice when bought separately: 95.92 EUR

Genuine Losi spare/option part.

Genuine Losi spare/option part. Contents:4 pieces

Genuine Top Tuning spare/option part.Lens for the Losi DBXL-E, 5ive-T 2.0 front light bar. It protects the LED strip against dirt.The lens replaces the black stock frame.When using on the 5ive-T 2.0 light bar, please note that the support spacers of the lens must be cut off (only a pair of scissors is required). Contents:1 piece

To ensure the required cooling for current 1/5 and 1/6 engines the flywheels have fins on both sides. Therefore the fan housing has large openings on the crankcase side for the required air supply. However, the risk of foreign objects (grass, sand, or even stones!) entering here Is very high! As a result, broken fins on the flywheel occur frequently. This leads to reduced cooling efficiency and - even more critical vibrations from a flywheel which is out of balance due to missing fins. Therefore, this kind of flywheel protection is highly recommended, especially for offroad use. The product video explains the handling in detail! Note:It is essential to thoroughly clean and degrease the crankcase prior to attaching the hook-and-loop tape (OKS2661)!For installation on Chung-Yang and Zenoah engines in FG cars, the crankcase cover must be slightly modified in two places where the engine mount is attached (see Figure 6 and 7). Furthermore the fit of the fabric must be as tight as possible in the region of the layshaft pinion (in front of the differential ring gear!) (see Figure 8).Set includes:Special tailored fabric with sewed on hook-and-loop tapehook-and-loop tape for installation to the crankcaseAdhesive for securing the hook-and-loop tape

Genuine HT spare/option part. Ball & socket tool with t-handle, special version for the ball joints.Fits Losi 5ive-T. 5ive-B, Desert Buggy XL, Desert Buggy XL-E, Monster Truck XL and the HPI Baja 5B and Baja 5R Ford Mustang.Contents:1 piece

Hobbythek car bag for 1/6 cars. Fits for all 1/6 models for example: FG Offroad-; Monster/Stadium-; Racetruck-; Carson-; Smartech-; Reely Carbon Fighter; Losi Super Rock Rey, Super Baja Rey, Axial Jeep and any more models. Made from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure. No dirt in the car boot! Dimensions: Length: 70 cmWidth: 50 cmHeight: 40 cm

Genuine HT spare/option part. Hardened pins made of 100Cr6 steel for driveshafts, differentials, wheel drives and similar applications. Pack of ten. Sizes available:y1345/01: 4 x 18 mm, e.g. for Losi 5ive-T/Mini and HPI Baja differentials or HPI Baja layshafty1345/02: 4 x 20 mm, e.g. for Losi 5ive-T/Mini CVD jointsy1345/03: 4 x 24 mm, e.g. for Losi DBXL and HPI Baja wheel hexy1345/04: 5 x 24 mm, e.g. for Losi 5ive-T/Mini wheel hexContents:10 pieces