FG Sportsline 2WD-465 Electric Porsche GT2, up to 200A

The 2WD-465 Sportsline electric model is based on a short chassis (465 mm wheelbase) with double wishbones Rear and front axles built. The vehicle is factory equipped with the 2-damper front axle.E stands for electric power which is equivalent to extremely high torque, high speed and all this without any engine noise. The Sportsline models are equipped with a powerful brushless engine and a Brushless ESC. This control can be regulated simply via transmitter or optionally via the program card.In the unpainted version Version does not include a decal sheet!Features:The front axle of the GT2 was widened to 384 mm. The rear axle is 395 mm wide.Chassis short 465 with double wishbones on the rear and front axle completely assembled, ball bearings, differential gear, oil pressure shock absorber, multi-part unpainted polycarbonate body (item no. 05160L), white spoke rims, tires and tire inserts.T2M standard equipment brushless motor and ESC, 6S - 150A controller up to 3-6S  - brushless motor 6S You can order a motor/ESC combination with 8S for an additional charge.- ESC 200A, 3-8S LiPo, BEC 8A - Brushless Motor 8S The model is also available in our shop selection including complete RTR equipment! RTR features RTR = Ready to Run. The RTR version is delivered ready to drive and with the 2.4 GHz remote control installed.Decor set: selectable (included in the painted version)LiPo batteries and the appropriate charger are required for all versions of the electric models. We recommend using LiPo batteries with a maximum length of 150mm and a width of 50mm to ensure trouble-free installation. The model is supplied with an EC8 connector system.

The 2WD-465 Sportsline model is built on the short chassis with double a-arms suspension front and rear. The vehicle is equippedwith the 2-shocks front suspension as standard, which ensures optimum traction for both front wheels.On the GT2, the front axle has been widened to 384 mm. The rear axle is 395 mm wide.Technical description:The model has a 465 wheelbase. The models are built on a 4mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in. Further equipment points are front disk brakes, differential gear, easy-running FG ball drive, alloy brake calliper with big brake disk, stabilizer bar front and rear, tuned pipe muffler, rear brace, 24T steel pinion, spark plug cap suppression cover, latest version (Evo) oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The models are equipped with a powerful 23ccm combustion engine. The engine needs a 2-stroke petrol oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-tried system: from the engine over the 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box.To complete the models all merchantable servos and radio control systems are suitable. The RTR version comes with complete factory installed rc-system, including Ni-Cads! The car comes with an unpainted body shell.The FG 5164 decor sheet is not included!Also available painted in the shop selection!Dimensions: Length: 840 mm Width: 395 mm Height: 250 mm Wheelbase: 465 mm Touring cars in action!Painting tips:

With this robust and reliable FG chassis, which is equipped with a powerful 26 cm³ combustion engine, you get the ideal entry into the fascinating "royal class" of large scale RC models as well as into the competition.A roll cage was installed for more rigidity and protection of the vehicle.The model has a 510 wheelbase. The models are built on a 4 mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in.Further equipment points are differential gear, 24 teeth steel pinion, oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings.The remote control, the two servos and the receiver battery (RTR set!) are required to operate the FG model. This RTR equipment is available in our shop selection for an additional fee.The body shell is clear, but also available in a painted version in our shop selection for an additional fee.Thanks to the numerous available option parts, you can upgrade your FG Challenge Line as required.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 870 mmWidth: 392 mmHeight: 260 mmWheelbase: 510 mm

Original FG spare/tuning part. The following items are required for completion:- E-motor, ESC, steering servo, transmitter system, LiPo drive batteries and charger. The models are built on a 4 mm aluminium chassis with double wishbones on the rear and front axles. All holes in the aluminium chassis for attaching the chassis parts are countersunk from below. The camber, caster and toe-in can be adjusted on the front and rear axles using track rods or adjusting screws with right/left-hand thread. Further equipment points are: Differential gear, smooth-running FG ball drive, oil-pressure shock absorbers with volume compensation and external adjustment ring for the spring preload. All rotating drive parts such as shafts, axles etc. are mounted on ball bearings. The tyres are glued to the rim. Not included : - RC system - 1100 KV brushless motor - 160A controller - Servo- You will also need Lexan paint and a decal sheet.Dimensions : - Length......840 mm - Width.....395 mm - Height.......250 mm - Wheelbase...465 mm

This stadium truck is the perfect model for the entry into the RC large scale sport. The model is fully assembled and can be equipped with an RC system in our shopping cart selection. It is available with Lexan body shell. Limited Edition tune parts:2x 4492 Alu Querlenker hinten untenPreis: 55,70 EUR1x 4475/01 Rear alloy shock mountPrice: 96,10 EUR1x 6423 Gear protectorPrice: 20,70 EUR1x 6499 Alloy front shock towerPrice: 69,70 EUR4x 18001 Alloy a-armPrice: 131,60 EURBase price Stadium Truck Sportsline829,90 EURSurcharge tuning parts:373,80 EURRegular price Limited Edition:1203,70 EURThe Stadium Truck comes top equipped as standard and also offers numerous choices for additional option parts to increase driving performance.Product details:1/6 scale 2WD Stadium Truck with double wishbone independent suspension. 4 mm metal chassis plate. All holes on the underside are countersunkFuel tank and RC components are protected by the bevelled chassis>Adjustable toe-in/out on the front suspensionAdjustable camber on the rear suspension4 large-volume oil pressure shocks absorbers with adjustable spring tension for a smooth ride. The secondary spur gears, differential gears and all drive parts are case hardenedThe stadium truck comes with a powerful 26cm³ FG 260 internal combustion engine. This requires standard 2-stroke gas/oil mix available at every gas station.With a tank capacity of 0.7 litres, a driving time of approx. 40 minutes is achieved.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery DimensionsLength: 730 mmWidth: 510 mmHeight: 360 mmWheelbase: 470 mm

The FG Sportsline Formula 1 electric convinces not only by its appearance, but rather by its technical achievements. The unique details such as push rods, horizontal oil pressure shock absorbers, double wishbone and much more can be found in almost no other model.The chassis is built on a high-strength 5mm aluminum chassis plate and thus offers extreme stability. Countersunk holes in the chassis plate allow the screws to be flush, ensuring a flat surface under the model. Versatile adjustment options on the front and rear axles allow the model to be perfectly adapted to your own needs. Adjustments such as camber, caster, etc. are no problem whatsoever, even for beginners, and are made via the double a-arms, which provide maximum stability at the rear axle by means of additional track rods. Also the adjustable aluminum oil filled shock absorbers convince on full length and offer maximum performance even on a very difficult underground. The above mentioned push-rod suspension enables play-free power transfer from the suspension to the shock absorbers, which is essential for precise driving.The factory-mounted combination of 980KV motor and 160A MAX6 esc provides performance that is second to none. With a 6S 22.2V (4S 14.8V is also possible) LiPo batteries, the motor reaches a final speed of about 25,000 rpm, leaving a comparable combustion engine far behind. The braking is done by the 980KV motor and is very strong. Within a few meters the model comes from top speed to a standstill. Those who have searched in vain for reverse gear with a combustion engine will find it with the electric version. The operation is very easy, if you press the brake lever once, you hit the brakes. If you press the brake lever twice, you shift into reverse. With the help of a programming card (available separately) you can adjust all ESC values according to your needs. This includes setting options for power, brake force, low-voltage protection and much more. Furthermore, the model has the following technical: Features: 160A MAX6 esc, 6S compatible (4S also possible) 980KV brushless motor Waterproof components Adjustable aluminum oil filled shock absorbers Aluminum levers for the shocks Aerodynamic Lexan body shell 5mm thick aluminum chassis plate Mounting compartment for steering servo Mounting compartment for separate brake servo (for mechanical/hydraulic brakes) Cogged belt drive Side battery mounts for optimal weight distribution Custom CNC machined motor mount Unique double a-arms Push rod suspension Treaded F1 tires Tuning ball drive shafts Dimensions: Length: 960 mm BrWidtheite: 440 mm Height: 230 mm Wheelbase: 620 mm Technical data 980KV brushless motor: Max. Voltage: 33V Max. Current: 130A Max. Speed: 30.000RPM Power in watts: 4250W Rotor poles: 4 No-load current: 2.8A Resistance: 0.0128 Length: 82mm Diameter: 55 / 58mm with fins Weight: 880g Shaft diameter: 8mm Free shaft length: 30mm Weight: 880g Technical data Max6 esc: Continuous current: 160A Peak current: 1050A Battery: 3S - 8S LiPo or 9-24 cells NiMH BEC: 6V/7,2V - 3A/6A Abmessungen:70x56x46,5mm Weight: 240g Note: In our online shop you can also find a detailed 360° illustration, where especially the technology of the FG Formula1 electric chassis can be seen.Note battery mounting:When mounting the l/h side LiPo battery, you must always make sure that it does not rub against the drive pulley. For this purpose, a 5 mm thick piece of foam mat or something similar between battery and battery holder is sufficient to ensure an appropriate distance. For driving you still need: 2 drive batteries incl. charger Battery dimensions maximum: Length 143 mm/5,6 Width 48 mm/1,9 Height 40 mm/1,6 Connector EC8 The RTR equipment (remote control and steering servo!) The body shell comes unpainted! In our online store you can use our store configurator (shopping cart selection / options menu) to add the desired parts, as well as the completely painted body. Formular 1 models in action!

For stunt and bashing performance at its biggest and best, the ARRMA® OUTCAST 1/5 8S Stunt Truck has no equal. In this new ready-to-run version, it's better than ever before! Not only is the OUTCAST 1/5 8S EXB Stunt Truck RTR loaded with EXtreme Bash parts for even greater durability, but it also arrives with higher-powered Spektrum 8S LiPo-capable brushless electronics already installed all at an astonishingly affordable price.Punchy and powerful, the new Spektrum 8S-capable brushless system features a massive 5687 FIRMA 1100Kv brushless motor with a huge 56mm diameter and 10% more torque than the previous OUTCAST 8S RTR. The new motor is paired with a Spektrum S6510 steel gear servo that puts out 820 oz-in of torque at 8.4V nearly 50% more muscle than its predecessor. The new RTR package also includes a Spektrum FIRMA 160A V2 Smart ESC and Spektrum DX3 3-channel 2.4GHz DSMR radio system, with Spektrum AVC technology built-in to keep the huge power under control.The toughness engineered into the ARRMA® OUTCAST 1/5 8S EXtreme Bash Stunt Truck must be bashed to be believed. A huge number of EXB-hardened parts and options give it virtually unstoppable strength straight out of the box. They include a 5mm thick EXB 7075 T6 CNC aluminum laser-etched chassis plate; EXB red-anodized CNC aluminum front brace mount; and EXB front bumper with impact absorbing design. Topping it all off is an aggressive truck body with a bold new EXB matte-and-gloss paint scheme, for a look unlike any other vehicle. No "Candy Crush" designs here the OUTCAST EXB is built to be as purposeful as it looks!Adjustable, oil-filled, 20mm bore shocks with 6mm thick shock shafts and ultra-thick composite towers soak up bumps. The ARRMA® OUTCAST 1/5 8S EXtreme Bash Stunt Truck RTR blasts over all kinds of surfaces, from asphalt to dirt and grass. Big dBoots® BACK FLIP 2 big block tires on multi-spoke wheels add all-terrain traction. Everything in the durable design contributes to confident control and responsive handling for whatever eye-popping stunts you can imagine.A center body support, aluminum center braces and composite chassis side pods add more strength. All-metal diff outdrives and gearbox internals, plus durable steel driveshafts, provide a reliable, heavy-duty drivetrain that holds up to extreme action.Of course, the popular, easy-access ARRMA® modular design lowers your maintenance downtime to the minimum so you can keep on enjoying the surprisingly affordable high-end performance without interruption. Ultimately, the OUTCAST 1/5 8S EXtreme Bash Stunt Truck is more than a massive and powerful bashing machine. It's the biggest and best ARRMA® ready-to-run basher to date! EXB (EXtreme Bash) ComponentsEXB-hardened components throughout its fully assembled chassis give the 1/5 scale ARRMA® OUTCAST 8S EXtreme Bash Stunt Truck RTR virtually unstoppable strength. Steel TurnbucklesHeavy-duty components including the 8mm thick steel rear turnbuckles and 7mm thick steel steering turnbuckles enable the 1/5 scale OUTCAST EXB to withstand extreme off-road bashing. Oil-Filled ShocksMounted on ultra-thick composite front and rear towers and featuring plush shock tuning, the adjustable, oil-filled, 20mm bore shocks with 6mm thick shock shafts easily soak up bumps. High-Traction dBoots® TiresLong-lasting new Big Block dBoots® Back-Flip BB tires on multi-spoke wheels with durable hubs deliver all-terrain traction and add an aggressive edge to the EXB matte and gloss effect finished truck body. Quick Motor AccessARRMA® holds your maintenance downtime to the minimum with an efficient, driver-friendly design. For example, the easy-access, 3-bolt sliding motor mount allows quick motor removal. Electronics ModuleThe easy-access, molded electronics module screwed to the chassis contains a waterproof receiver box, servo mount and ESC tray ready to protect your electronics from dirt and moisture. Multi-Structured Center Brace SystemMade of rugged anodized 7075 T6 aluminum, the laser-etched 5mm chassis plate includes strong composite chassis side pods and a center body support and brace for maximum durability. Durable Metal ConstructionDurable steel driveshafts plus all-metal diff outdrives and gearbox internals keep the heavy-duty 4-wheel drivetrain rolling over punishing tracks. An EXB-toughened suspension system smooths the ride. Smart TechnologieThe included Spektrum DX3 Smart transmitter and SRS6110AT AVC® (Active Vehicle Control®) receiver let you take full advantage of the Spektrum Smart Firma brushless motor and ESC's innovative telemetry capabilities. Download the free Spektrum Dashboard App to your mobile device and follow motor RPM, ESC temperature, receiver voltage, drive pack voltage and more data in real-time. Dial-in extra stability with the radio's AVC® system to carve corners and nail jumps without letting up on the throttle. Features The ultimate ARRMA® 1/5 scale RTR Stunt Truck Engineered tough with EXtreme Bash 7075-T6 aluminum parts Bigger, tougher shocks, linkages, turnbuckles, and more Aggressive new EXB matte-and-gloss color scheme Updated 8S LiPo capable Spektrum brushless power system EXB 7075 T6 5mm thick CNC aluminum laser-etched chassis plate EXB Red-anodized CNC aluminum front brace mount Spektrum FIRMA 1100Kv brushless motor with 10% more torque Spektrum S6510 steel gear waterproof servo with 47% more torque Spektrum DX3 3-channel 2.4GHz DSMR radio Spektrum SR6200A DSMR receiver with AVC® Updated Spektrum FIRMA 160A V2 Smart ESC for more punch and better driving feel New big block dBoots® Back-Flip BB tires Front bumper with impact-absorbing design Easy-access 3-bolt sliding motor mount Heavy-duty drivetrain Easy-access front and rear diff module design All-metal diff outdrives and gearbox internals Durable steel driveshafts Durable wheel hubs Easy-access waterproof electronics module Center body support and brace for maximum durability Strong composite chassis side pods Wheelie bar High-quality CNC machined aluminum 24mm wheel wrench included