Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

Carburetor Walbro WT 990

Product information "Carburetor Walbro WT 990 "

7855 Carburetor type: Walbro WT990



Standard carburetor for Zenoah G290.

Typ: Walbro WT990

Fits all Zenoah G230/240/260/270 and 290 engines as well as the respective Chung-Yang (CY) versions, also Losi and HPI Fuelie, Smartech, Carson PT engines, and many others.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

y0037/01 Ball bearings, sealed type 2RS (3/16"x5/16"x1/8")
Genuine HT spare/option part. Ball bearings, sealed type 2RS (3/16x5/16x1/8).Content:2 pieces

€12.90*

Average rating of 0 out of 5 stars

y0037/02 Steel shims 8 x 5 x 0.3 mm
Genuine HT spare/option part. Custom made steel shims.Part is delivered in silver or black color from vendor!Dimensions:Inner diameter: 5 mmOuter diameter: 8 mmThickness: 0.3 mmContents:5 pieces

€6.90*

Average rating of 0 out of 5 stars

y1367 TURBO-TWIST 325 mm special carburetor screw driver
TURBO-TWIST, 325 mm long screw driver in top quality. Allows you to set the carburetor on almost any 1:5 / 1:6 model also with a mounted body shell.On most models, you have to adjust the motor with this screwdriver does not even stoop.Caution:May differ from picture!

€9.90*

Customers also bought

Average rating of 0 out of 5 stars

y0916 Original Zenoah G290 rebuild kit, set
Rebuild kit for the Zenoah G290 engine to replace piston/cylinder related parts. The kit includes the following parts:Cylinder G290Piston G290Piston ring G290Piston pin G290Piston pin retainer clipsCylinder gasketPlease note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€94.90*

Average rating of 0 out of 5 stars

2012-07 Mecatech Plastic Bumper
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€18.50*

Average rating of 0 out of 5 stars

2012-94 Mecatech Clutch Flange Spacer
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€7.50*

Average rating of 0 out of 5 stars

2020-10 Mecatech Clutch blocks Alloy for Mecatech 2020 clutch
Genuine Mecatech spare/option part. Contents:1 set

€51.00*

Average rating of 0 out of 5 stars

2012-13 Mecatech Carbon Fiber front Body Support
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€24.90*

Similar products

%

Average rating of 0 out of 5 stars

Walbro carburetor WT603B / WT990 / WT813A / WT1107 / WT1048 / WT668C
7355/08 FG Carburetor type: Walbro WT603BStandard carburetor for Zenoah G230/260. Carb has integrated choke. Typ: Walbro WT603BHowever, we recommend using the WT668C instead of the WT603B.This also has a choke, but the manufacturing quality of the WT668C is better than the WT603B!Optional ball bearing of the throttle shaft can be selected from the shops menu.y1483 Walbro WT-1048 Racing carburetorPopular performance carburetor without choke; with 13.5 mm venturi diameter, especially suitable for large-displacement engines like the Zenoah G320.The stock throttle shaft has been replaced with the proper version required for car applications; including the throttle lever as well.All existing throttle linkages can therefore be connected as usual without modifications.This carburetor does not feature a primer bulb nor a connection for a return line. It is therefore only connected to the supply line from the tank, the return line of the tank has to be closed.Optional ball bearing of the throttle shaft can be selected from the shops menu.y1067 Walbro WT668C carburetorThe Walbro WT668C carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23cc up to over 30cc.The Walbro WT668C features an integrated choke with lever and a throttle shaft linkage lever. Optional ball bearing of the throttle shaft can be selected from the shops menu.Alternative: Walbro 603B also with chokey0251 Performance carburetor with accelerator pump type: WT-813AWalbro WT-813A carb with accelerator pump, improves low end response when the engine is tuned for maximum performance. 15.88mm bore, 12.7mm venturi. Ready for installation with modified shaft already installed. Fits Zenoah G230/240/260/270 engines and their CY/HPI Fuelie clones as well. Optional ball bearing of the throttle shaft can be selected from the shops menu.7855 FG Carburetor type: Walbro WT990Standard carburetor for Zenoah G240, G270 and G290. Typ: Walbro WT990 Optional ball bearing of the throttle shaft can be selected from the shops menu.y1016/051 Carburetor WT1107 G320RCGenuine Zenoah spare/option part. Standard part fits Zenoah G320RC.Optional ball bearing of the throttle shaft can be selected from the shops menu.

€59.90* €79.90* (25.03% saved)

Average rating of 0 out of 5 stars

y1366 TURBO-TWIST 325 mm special XXL screw driver
y1366 Version: y1366/03 - Phillips no. 2 / PH2
TURBO-TWIST, 325 mm long screw driver in top quality.Allows easy access to hard-to-reach screws in any 1/5 & 1/6 car.Features:Soft Grip handlesExtra long 325 mm shaftChrome Vanadium hardened and tempered bladesBlackened magnetic tipsVersions:y1366/01 - Phillips No. 0 / PH0y1366/02 - Phillips No. 1 / PH1y1366/03 - Phillips No. 2 / PH2y1366/04 - Flat 1.2 x 8 x 325 mm

€6.90*

Average rating of 0 out of 5 stars

7355/08 FG Carburetor type: Walbro WT603B
Genuine FG spare/option part.Standard carburetor for Zenoah G230/260. Carb has integrated choke.Typ: Walbro WT603B.Contents:1 piece

€69.90*

Average rating of 0 out of 5 stars

y1483 Walbro WT-1048 Racing carburetor
y1483 Version: y1483/01 WT-1048 Racing carburetor
Genuine Walbro spare/option part.Popular performance carburetor without choke; with 13.5 mm venturi diameter, especially suitable for large-displacement engines like the Zenoah G320.The stock throttle shaft has been replaced with the proper version required for car applications; including the throttle lever as well.All existing throttle linkages can therefore be connected as usual without modifications.This carburetor does not feature a primer bulb nor a connection for a return line. It is therefore only connected to the supply line from the tank, the return line of the tank has to be closed.Optional ball bearing of the throttle shaft can be selected from the shops menu.Contents:1 piece

€89.90*

Average rating of 0 out of 5 stars

Carburetor Walbro WT 1107 with choke normal/ball-raced
Walbro Vergaser WT1107 with choke Standard carburetor for Zenoah G320. Typ: Walbro WT1107This is the stock carburetor used for the G320RC engine, and will also work on all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23 cm³ up to over 30 cm³. Dimensions:Bore: 15,88 mmVenturi: 13,5 mmIndependent tunable high and low speed jets.The carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23 cm³ up to over 30 cm³.

€69.90*

Average rating of 0 out of 5 stars

7855 FG Carburetor type: Walbro WT990
Genuine FG spare/option part. Standard carburetor for Zenoah G290.Typ: Walbro WT990.Contents:1 piece

€79.90*

Average rating of 0 out of 5 stars

Carburetor Walbro WT 813
y0251 Performance carburetor with accelerator pump type: WT-813Walbro WT-813A carb with accelerator pump, improves low end response when the engine is tuned for maximum performance. 15.88mm bore, 12.7mm venturi. Ready for installation with modified shaft already installed. Fits Zenoah G230/240/260/270 engines and their CY/HPI Fuelie clones as well. Fits all Zenoah G230/240/260/270 and 290 engines as well as the respective Chung-Yang (CY) versions, also Losi and HPI Fuelie, Smartech, Carson PT engines, and many others.

€79.90*

Average rating of 0 out of 5 stars

y1367 TURBO-TWIST 325 mm special carburetor screw driver
y1367 Version: y1367/01 - 1,0 x 5,5 x 325 mm
TURBO-TWIST, 325 mm long screw driver in top quality. Allows you to set the carburetor on almost any 1:5 / 1:6 model also with a mounted body shell.On most models, you have to adjust the motor with this screwdriver does not even stoop.Caution:May differ from picture!

€9.90*

Average rating of 0 out of 5 stars

Carburetor Walbro WT 668B/668C with choke normal/ball-raced
Alternative: Walbro 603B also with choke. But with better manufacturing quality!The Walbro WT668B carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23cc up to over 30cc. The Walbro WT668B features an integrated choke with lever and a throttle shaft linkage lever.The WT668B is also available with ball-raced throttle shaft under part number # y0036/04 Ballraced tuning Walbro WT668B carburetory0036/04 Ballraced tuning Walbro WT668B carburetorWith dual ball bearings on the throttle shaft. Two sealed bearings 2RS type (3/16" x 5/16" x 1/8") shielded by two steel plates (5 x 8 x 0.3 mm). High quality processed and optimized for racing use! The soft stock screw holding the throttle lever has been replaced with a high strength Allen key screw. Since all screws on the carb are imperial sized, so is the key for this screw. A corresponding bit is included in our tool set y0785, or you can use Allen key wrench y0037/03 as well.The Walbro WT668B carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23cc up to over 30cc. The modified Walbro WT668B features an integrated choke with lever and a throttle shaft linkage lever.The Walbro WT668B carburetor is also available in a standard version under part number # y1067 Walbro WT668B carburetor.

€69.90*

Average rating of 0 out of 5 stars

2021-01 Mecatech carburetor
Genuine Mecatech spare/option part. Mecatech Racing carburetor completely CNC machined no tolerances Increase in performance due to less restrictions in the air path, also fuel-saving no failures due to defects Contents:1 piece

€295.00*

Average rating of 0 out of 5 stars

7755 FG Carburetor Zenoah Walbro WT-813A
Genuine FG spare/option part.Carburetor type: Walbro WT-813A.Contents:1 piece

€111.95*

Average rating of 0 out of 5 stars

y1016/051 Carburetor WT1107 G320RC
Genuine Zenoah spare/option part. Replacement part fits Zenoah G320RC.

€79.90*

Customers also viewed

%

Average rating of 0 out of 5 stars

Walbro carburetor WT603B / WT990 / WT813A / WT1107 / WT1048 / WT668C
7355/08 FG Carburetor type: Walbro WT603BStandard carburetor for Zenoah G230/260. Carb has integrated choke. Typ: Walbro WT603BHowever, we recommend using the WT668C instead of the WT603B.This also has a choke, but the manufacturing quality of the WT668C is better than the WT603B!Optional ball bearing of the throttle shaft can be selected from the shops menu.y1483 Walbro WT-1048 Racing carburetorPopular performance carburetor without choke; with 13.5 mm venturi diameter, especially suitable for large-displacement engines like the Zenoah G320.The stock throttle shaft has been replaced with the proper version required for car applications; including the throttle lever as well.All existing throttle linkages can therefore be connected as usual without modifications.This carburetor does not feature a primer bulb nor a connection for a return line. It is therefore only connected to the supply line from the tank, the return line of the tank has to be closed.Optional ball bearing of the throttle shaft can be selected from the shops menu.y1067 Walbro WT668C carburetorThe Walbro WT668C carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23cc up to over 30cc.The Walbro WT668C features an integrated choke with lever and a throttle shaft linkage lever. Optional ball bearing of the throttle shaft can be selected from the shops menu.Alternative: Walbro 603B also with chokey0251 Performance carburetor with accelerator pump type: WT-813AWalbro WT-813A carb with accelerator pump, improves low end response when the engine is tuned for maximum performance. 15.88mm bore, 12.7mm venturi. Ready for installation with modified shaft already installed. Fits Zenoah G230/240/260/270 engines and their CY/HPI Fuelie clones as well. Optional ball bearing of the throttle shaft can be selected from the shops menu.7855 FG Carburetor type: Walbro WT990Standard carburetor for Zenoah G240, G270 and G290. Typ: Walbro WT990 Optional ball bearing of the throttle shaft can be selected from the shops menu.y1016/051 Carburetor WT1107 G320RCGenuine Zenoah spare/option part. Standard part fits Zenoah G320RC.Optional ball bearing of the throttle shaft can be selected from the shops menu.

€59.90* €79.90* (25.03% saved)

Average rating of 0 out of 5 stars

Carburetor Walbro WT 603B with choke, ball-raced
7355/08 Carburetor type: Walbro WT 603BStandard carburetor for Zenoah G230/260. Carb has integrated choke. Typ: Walbro WT603B y0036/01 Ball-raced tuning carburetor Walbro WT 603B-RacingWith dual ball bearings on the throttle shaft. Two sealed bearings 2RS type (3/16" x 5/16" x 1/8") shielded by two steel plates (5 x 8 x 0.3 mm). High quality processed and optimized for racing use! The soft stock screw holding the throttle lever has been replaced with a high strength Allen key screw. Since all screws on the carb are imperial sized, so is the key for this screw. A corresponding bit is included in our tool set y0785, or you can use Allen key wrench y0037/03 as well. Ball-raced Zenoah G230/260 stock carburetor. Fits all Zenoah G230/240/260/270/290/320 engines as well as the respective Chung-Yang (CY) versions, also Losi and HPI Fuelie, Smartech, Carson PT engines, and many others.Normal:Ball-raced:

€88.90*

Average rating of 0 out of 5 stars

Carburetor Walbro WT 813
y0251 Performance carburetor with accelerator pump type: WT-813Walbro WT-813A carb with accelerator pump, improves low end response when the engine is tuned for maximum performance. 15.88mm bore, 12.7mm venturi. Ready for installation with modified shaft already installed. Fits Zenoah G230/240/260/270 engines and their CY/HPI Fuelie clones as well. Fits all Zenoah G230/240/260/270 and 290 engines as well as the respective Chung-Yang (CY) versions, also Losi and HPI Fuelie, Smartech, Carson PT engines, and many others.

€79.90*

Average rating of 0 out of 5 stars

y0037/01 Ball bearings, sealed type 2RS (3/16"x5/16"x1/8")
Genuine HT spare/option part. Ball bearings, sealed type 2RS (3/16x5/16x1/8).Content:2 pieces

€12.90*

Average rating of 0 out of 5 stars

7855 FG Carburetor type: Walbro WT990
Genuine FG spare/option part. Standard carburetor for Zenoah G290.Typ: Walbro WT990.Contents:1 piece

€79.90*

Average rating of 0 out of 5 stars

2021-01 Mecatech carburetor
Genuine Mecatech spare/option part. Mecatech Racing carburetor completely CNC machined no tolerances Increase in performance due to less restrictions in the air path, also fuel-saving no failures due to defects Contents:1 piece

€295.00*

Average rating of 0 out of 5 stars

7755 FG Carburetor Zenoah Walbro WT-813A
Genuine FG spare/option part.Carburetor type: Walbro WT-813A.Contents:1 piece

€111.95*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency