AT-DBXL006 ATOP aluminum front chassis brace for Losi DBXL/DBXL-E

€24.90*

Available

Product number: at_dbxl006

EAN: 4058575112396

Product information "AT-DBXL006 ATOP aluminum front chassis brace for Losi DBXL/DBXL-E"

Genuine ATOP spare/option part.

CNC-machined 6061-T6 aluminum front chassis brace for Losi DBXL/DBXL-E.

Compared to the stock plastic part the higher strength of the aluminum part noticeably increases the chassis rigidity.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

DBXL006/007 ATOP Front- and rear chassis brace, full set, for Losi DBXL/DBXL-E

Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum chassis braces for Losi DBXL/DBXL-E. Compared to the stock plastic part the higher strength of the aluminum part noticeably increases the chassis rigidity.Contents:2 pieces

€44.90*

Similar products

DBXL024 ATOP Aluminum axle extenders all Losi DBXL / DBXL-E / 2.0 / MTXL, with closed nuts

Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP RC.Increases track width by 25 mm. Fits all versions of DBXL / DBXL-E / 2.0 (brushless and gas) and MTXL. 2 mm O-rings protect against drive pin loss.Set of four including O-rings, drive pins and closed wheel nuts (wrench size 24 mm!).Contents:1 set

€64.90*

AT-DBXL002/01 ATOP Spacer bushings for camber/steering rods of Losi DBXL and DBXL-E

Genuine ATOP spare/option part. Aluminum spacer bushings for the ball joints on camber and steering rods of Losi DBXL and DBXL-E.Content:8 pieces

€9.80*

AT-DBXL002 ATOP aluminum camber rods/steering rods for Losi DBXL/DBXL-E

Genuine ATOP spare/option part. Camber rods for Losi DBXL with center section cnc-machined from 6061 aluminum by ATOP. High grade all-metal ball joints at the pivot points provide zero backlash and strength. Fits front and rear.Attention: On a DBXL-E 2.0 these rods can only be used as camber rods, not as steering rods! Dimensions: Hole to hole: 117mm Total length: 135mm Contents:2 pieces

€34.90*

AT-DBXL021 ATOP Aluminum front transmission mount for Losi DBXL/DBXL-E/2.0 + MTXL

Genuine ATOP spare/option part. Front transmission mount for Losi DBXL cnc-machined from 6061 aluminum by ATOP.Through the use of aluminum, the problem of torn out threads (incl. the front bumper installation) is eliminated. At the same time the chassis section under the transmission is strengthened and the mounting points for the shock towers are reinforced.Comes with all mounting screws included.This is the new ATOP version with the additional mounting points between transmission housing and transmission bracket for a more secure connection of these parts.Old and new versions are fully compatible, regardless of whether they are made of aluminum or plastic. The parts therefore fit all versions of DBXL and MTXL in any combination.However, the use of the additional mounting points requires the new version of both transmission housing and bracket!Contents:1 piece This article is identical to the article in the video!

€79.90*

AT-DBXL020 ATOP Complete Aluminum transmission case front / rear for Losi DBXL/DBXL-E/2.0 + MTXL

Genuine ATOP spare/option part. CNC-machined 6061 aluminum transmission case by ATOP, fits front and rear.Service life of ball bearings and ring & pinion will greatly benefit from the increased strength of this aluminum case. Comes with all mounting screws included.This is the new ATOP version with the additional mounting points between transmission housing and transmission bracket for a more secure connection of these parts.Old and new versions are fully compatible, regardless of whether they are made of aluminum or plastic. The parts therefore fit all versions of DBXL and MTXL in any combination.However, the use of the additional mounting points requires the new version of both transmission housing and bracket!Contents:1 piece This article is identical to the article in the video!

€139.90*

AT-DBXL001 ATOP Alloy spring retainer for Losi DBXL/XL-E +MTXL shocks

Genuine Atop spare/option part. Two pieces CNC-machined 6061-T6 aluminum spring perches for Losi DBXL. Direct replacement for the stock part (from set. # LOS 253006).Content:2 pieces

From €16.90*

Details

AT-DBXL003 ATOP aluminum throttle/brake servo horn for Losi DBXL/DBXL-E

at_dbxl003 Version: AT-DBXL003-02 with 18 teeth

Genuine ATOP spare/option part. CNC-machined from 6061 aluminum, significantly stronger and more rigid than any plastic version. Doule-sided anodized aluminum servo horn, available in 15T and 18t spline version. Three smooth 2.5 mm holes per side. 15T fits:Savöx 0236 MGSavöx 0235Losi 900and many other servos with 15T spline shaft18T fits:Spektrum DBXL-servo SPMS901Contents:1 piece

€14.90*

Details

AT-DBXL 015 ATOP Lower front- and rear alloy a-arms for Losi Desert XL/XL-E / 2.0

Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum suspension arms for Losi DBXL. Set of four a-arms with plastic bushings for the hinge pins, all required nuts and bolts are included.Contents:2 pieces

€79.90*

This product is no longer available.

AT-DBXL005 ATOP aluminum steering servo horn 15T, double-sided for Losi DBXL/DBXL-E

Genuine ATOP spare/option part. CNC-machined from 6061 aluminum, significantly stronger and more rigid than any plastic version. Doule-sided anodized aluminum servo horn with 15T spline. Three M4 threaded holes per side. Fits:Savöx 0236 MGSavöx 0235Losi 900and many other servos with 15T / 8mm spline shaftContents:1 piece

€12.90*

AT-DBXL016 ATOP aluminum steering rods for Losi DBXL-E 2.0

Genuine ATOP spare/option part. Steering rods for Losi DBXL-E 2.0 with center section cnc-machined from 6061 aluminum by ATOP. High grade all-metal ball joints at the pivot points provide zero backlash and strength. Dimensions: Hole to hole: 108mm Total length: 128mm Contents:2 pieces

€34.90*

Details

AT-DBXL026/027 ATOP Aluminum front spindles for all Losi DBXL/MTXL

Genuine ATOP spare/option part. One-piece CNC machined 6061-T6 aluminum spindles from ATOP, fits all Losi DBXL and MTXL versions, gas and brushless.Significantly more rigid than the stock plastic version, this part contributes to increased steering precision and directional stability. Stainless steel bushings for the King Pins are included.Comes with wheel bearings included. Contents:2 pieces

€149.90*

AT-DBXL009/010 ATOP Front and rear shock tower for Losi Desert XL/XL-E +MTXL

Genuine Atop spare/option part. CNC-machined 6061-T6 aluminum shock towers for Losi DBXL. Direct replacement for the stock part.Contents:2 piece

€119.90*