Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

68503 FG Conversions kit FG Leopard Sportsline 2WD to 4WD, set

Product information "68503 FG Conversions kit FG Leopard Sportsline 2WD to 4WD, set"

Item N° 68503
Conversions kit FG Leopard Sportsline 2WD to 4WD, set



This kit enables a conversion of the Leopard 2 into a Leopard 4 model with fourwheel drive. The conversion kit contents all chassis respectively drive components needed for the conversion.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Similar products

Average rating of 0 out of 5 stars

69241 FG Plastic servo retainer small
Genuine FG spare/option part. Dimensions:Length: 67 mmWidth: 20 mmHeight: 38.5 mmServo cutout: 42.7 x 28.7 mmContent:1 piece

€11.90*

Average rating of 0 out of 5 stars

69251/01 FG Plastic front axle housing, right, 2WD/4WD, 1:5
Genuine FG spare/option part. Contents:1 pieceFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€25.90*

Average rating of 0 out of 5 stars

69240 FG Plastic servo retainer big, 1 pair

€15.90*

Average rating of 0 out of 5 stars

69250/01 FG Plastic front axle housing, left, 2WD/4WD, 1:5
Genuine FG spare/option part.Contents:1 pieceFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€25.90*

Average rating of 0 out of 5 stars

68510 FG Electric conversion kit 1:6 2WD for 465 Wheelbase, set
Item N° 68510 Electric conversion kit 1:6 2WD for 465 Wheelbase, setSuitable for 2WD Buggy and Monster models as Marder, Beetle, Monster-Truck, Hummer, Jeep a.s.o with 465 mm wheelbase.This conversion kit is suitable for the 2WD FG models Marder, Beetle, Off-Road Buggy and Monster models with 465mm wheelbase. Suitable for the electric engines from FG Modellsport, Leopard BL engines and Castle Creation. The conversion kit includes gear and engine mount, fixing parts for cruise control and LiPo batteries. Cruise control, BL engine and LiPo batteries are not included. During the conversion several fixing holes have to be applied to the chassis. Gear transmission has to be changed accordingly to the use of the electric engine.For easy mounting we recommend LiPo batteries with a max. length of 150mm and 50mm width.The conversion kits include all mechanical parts (except electric engine with speed control, Lipo batteries) to convert your FG model scale 1:5 and 1:6 to an electric powered system.

€199.99*

Average rating of 0 out of 5 stars

69265 FG plastic-wishbone front bottom 2WD/4WD, 530, 2 pcs.
Item-No. 69265plastic-wishbone front bottom 2WD/4WD, 530, 2 pcs.Original plastic-wishbone, front bottom.For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€25.90*

Average rating of 0 out of 5 stars

68534 FG Conversions kit Sportline Touringcar long to 4WD
For converting the Sportsline long touring car into a model with 4WD drive. The conversion kit contains all chassis parts and drive parts that are required for the conversion.

€199.99*

Average rating of 0 out of 5 stars

69200/01 FG Alloy chassis 4WD, 530, 1pce.
Item N° 69200/01Alloy chassis 4WD, 530, 1pce.

€159.95*

Average rating of 0 out of 5 stars

69284 FG Reinforcing plate f.fr.-axle 2WD/4WD, 1:5, 1pce.
Item N° 69284 Reinforcing plate f.fr.-axle 2WD/4WD, 1:5, 1pce.Original partFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle..

€23.50*

Average rating of 0 out of 5 stars

69270/01 FG Plastic front uprights, 2WD/4WD 530, 2 pcs.
Item-No. 69270/01Plastic front uprights, 2WD/4WD 530, 2 pcs.Original FG Plastic front uprights.For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€35.90*

Average rating of 0 out of 5 stars

y68413/01 Front alloy uprights 2WD/4WD, touring car 530/535
Genuine HT spare/option part.The set includes uprights, steering arm, alloy stoppers, screws.Suitable for touring cars, 530/535 mm weelbaseContents:1 set For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.https://rc-car-online.de/en-ersatzteile_main,15.html

€219.90*

Average rating of 0 out of 5 stars

69266 FG Plastic wishbones up front 2WD/4WD, 530, 2 pcs.
Item-No. 69266Plastic wishbones up front 2WD/4WD, 530, 2 pcs.Plastic wishbones. up front.For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€25.90*

Customers also viewed

Average rating of 0 out of 5 stars

68534 FG Conversions kit Sportline Touringcar long to 4WD
For converting the Sportsline long touring car into a model with 4WD drive. The conversion kit contains all chassis parts and drive parts that are required for the conversion.

€199.99*

Average rating of 0 out of 5 stars

6000E FG Marder E 2WD with brushless engine and brushless ESC 150A
Genuine FG spare/option part.The electric powered version of the legendary Marder buggy is equipped with a powerful 1400kV brushless motor. Power supply: 4S Li-Po battery pack. In its entry level version 4S, the running time is about 15 minutes with lightning-accelerations and a top speed superior to the gas powered Marder one. In the 4S configuration, the E-Marder is a true rocket ship!You can select the car with complete RTR-equipment from the options menu. RTR equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. In the first place our 1:6 Off-Road Buggy stands for driving fun. Through the knobbed tires or with Slick tires (optional extras) the model can be driven cross-country, on a car park, simply just everywhere.The RTR version of the car includes servo, transmitter, receiver, transmitter / receiver and rechargeable batteries. 2WD Off Road BuggyMachined 4 mm aluminum chassis plate with side guardsIndependent suspension with many options for adjustmentRoll cage, can be used as a carrying handle as wellClosed factory painted body shell with decals already appliedFlange rims with knobby tiresBrushless motor150A brushless ESCTwo locations for the batteries with hook-and-loop strapsDimensions:Length: 620 mmWidth: 420 mmHeight: 260 mmWheelbase: 470 mmWeight: 6,4 kgContents:1 piece

€719.95*

Average rating of 0 out of 5 stars

FG Challenge Line 2WD-530 Porsche 962C with 26 cm³ FG engine
With this robust and reliable FG chassis, which is equipped with a powerful 26 cm³ combustion engine, you get the ideal entry into the fascinating "royal class" of large scale RC models as well as into the competition.The model has a 530 wheelbase. The models are built on a 4 mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in.Further equipment points are differential gear, 24 teeth steel pinion, oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings.The remote control, the two servos and the receiver battery (RTR set!) are required to operate the FG model. This RTR equipment is available in our shop selection for an additional fee.The body shell is clear, but also available in a painted version in our shop selection for an additional fee.Thanks to the numerous available option parts, you can upgrade your FG Challenge Line as required.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 945 mmWidth: 390 mmHeight: 215 mmWheelbase: 530 mm

From €899.90*

Average rating of 0 out of 5 stars

y1608 SPEED TEC CRANK Team-Edition Zenoah G320 7-port Tuning engine
The SPEED TEC CRANK genuine Zenoah engine is optimized for performance by hand with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC Team Edition version modifications: Cylinder & case:Adjustment of compression; enlarged ports, fuel management milled, machined and polished exhaust, intake is flow-optimized the case is specially matched with enlarged and flow-optimized cross section towards the ports Crankshaft:is adjusted, aligned and balancedFlywheel and ignition:Latest SPEED TEC CRANK SV ignition system for rc-car race engines with air baffles, a special balanced 62 mm diameter flywheel, modified ignition coil mount and special ignition system allows for the extremely fast revving of the SPEED TEC team edition engine and guarantees a significantly improved performance.The machined and more than 30% lighter than stock CRANK flywheel with fins on both sides contributes to the optimized engine cooling.Gaskets:Premium quality gaskets installed.Isolator:Special matched and raised insulator Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€1,099.00*

Average rating of 0 out of 5 stars

85428 HPI Spur gear holder
Genuine HPI spare/option part. Content:1 piece

€16.48*

Average rating of 0 out of 5 stars

TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters
Genuine TT spare/option part.The new and improved failsafe modul.This kill switch module works with most FM and 2.4 GHz rc-systems. Not compatible with AVC-equipped receivers! You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. With this module you can stop the engine with your radio. Additionally the module features a failsafe function which stops the engine when the rx-battery's voltage drops below a certain level or the rc-system has a glitch. A kill switch module fulfils two tasks. On the one hand, as a safety device, it is intended to shut off an engine with magneto ignition in case of failure of the remote control, and on the other hand, the engine can be stopped at any time by remote control.While the latter is mainly used for convenience, the safety aspect is what really matters.The failsave circuit integrated in all modern remote controls may brake the vehicle in the event of a radio interference, but this feature is dependent on the basic functionality of the receiver system and its power supply. However, if the receiver, the gas servo or the power supply fails completely, the failsave of the remote control can no longer do its job. The vehicle may be running haywire at full throttle.In these cases, the kill switch will cut the ignition of the engine and the vehicle will roll out without power.Features:Ready to install no soldering requiredRemote LED for easy-to-spot operational status (ignition live/killed)Optically coupled to isolate the ignition from the radio systemThreshold value for undervoltage protection (4V, 5V, 6V) adjustable with jumpers allows adaptation to the rx-battery type (LiPo, LiFePo, NiMH, NiCd)Contents:1 piece

€42.90*

Average rating of 0 out of 5 stars

FG Sportsline 4WD-530 with BMW M4 body
FG introduces the first full-blooded fourwheel-driven Touring and Sports cars within the Sportsline series. With a wheelbase of 510mm and 530mm these 4WD chassis fit almost all FG bodyshells. Equipped with a technical high-grade chassis, a powerful 26 cm³ engine with tuning pipe, snap-closure fuel tank, differential gear, front disk brake and a lot more. This chassis offers maximal traction as well as easy handling, simply pure driving fun. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Technical description:The FG Sportsline class with its detailed bodyshells is not only a visual highlight. These models convince through their sophisticated chassis. With a double wishbone suspension offering adjusting possibilies for toe-in, wheel camber and caster as well as a robust four-wheel drive which gives the model neutral driving characteristics. We placed special importance on durability through using solid materials and on suitability also for beginners in this hobby. The FG Sportsline class is the reasonably priced but still top-quality entry into the RC car sports sector. Equipped with a strong 26 cm³ engine, tuning pipe, tank with snap closure, 2 differential gears, front disk brake and a lot more. However, highlight remains the approved FG four-wheel drive. Maximum traction as well as easy handling, grip in the curves - these are the advantages only offered by a four-wheel drive.Dimensions: Chassis length: 780 mm Width: 392 mm Height: 240 mm Wheelbase: 530 mm The RTR version of the car includes servos, transmitter, receiver, rechargeable batteries for transmitter / receiver.Touring cars in action!Painting tips:

From €1,239.95*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Agency