Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

6546/02 FG receiver battery Ni-MH 6V 3600mAh

Product information "6546/02 FG receiver battery Ni-MH 6V 3600mAh"

Genuine FG spare/option part.

Measures:
  • Width: 111 mm
  • Height: 47 mm
  • Depth: 23 mm


Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

y0657 Receiver battery packs standard size, NiMh, 4500 mAh
Genuine HT spare/option part. 5 cells, 6 volt, cell size Sub-C. More applications on request.Dimensions: approx 112 x 46 x 23 mmContents:1 piece

€44.90*

Alternatives

Average rating of 0 out of 5 stars

y0657 Receiver battery packs standard size, NiMh, 4500 mAh
Genuine HT spare/option part. 5 cells, 6 volt, cell size Sub-C. More applications on request.Dimensions: approx 112 x 46 x 23 mmContents:1 piece

€44.90*

Customers also bought

Average rating of 0 out of 5 stars

3000-37 Mecatech valve cover, 6 pcs.
Replacement part for Mecatech Expert and Cross Hydro.Inner diameter of eylet and cap: 4 mmLength: 21 mm

€9.90*

Average rating of 0 out of 5 stars

6464/05 FG Foam filter oiled
Genuine FG spare/option part.Spare part for FG no.: 6464.Dimensions:Outer diameter 61 mmInner diameter 20 mmHeight 71 mmContent:2 pieces

€12.90*

Average rating of 0 out of 5 stars

y1581 HT H6AC/DC compact charger, 50W up to 6S
HTRC charger with extremely easy 1-button operation. It charges the battery types commonly used in car modeling with mains or DC voltage supply. Infinitely adjustable charging current, automatic shut-off and balancer ports for 1S - 6S batteries are built in.Output via 4 mm sockets to accept all charging cables with 4 mm banana plugs! Specifications: AC input voltage: 100 - 240V DC input voltage: 10 - 18V Charging Power: 50W Charge Current Range: 0.1 - 5 A Max balancer current: 300mA / cell LiPo / LiFe cell count: 1 - 6 cells NiCd / NiMH battery cell count: 1 - 15 cells Size: 145 x 80 x 44 mm Weight: 170 g Content: 1 x HTRC H6AC/DC charger 1 x T- connector charging cable 1 each adapters T-connector to BEC / Futaba / JR / alligator clips 1 x Mains cable 1 x DC input cable 1 x Instruction manual

€44.90*

Average rating of 0 out of 5 stars

y0657 Receiver battery packs standard size, NiMh, 4500 mAh
y0657 Connector: y0657/01 Futaba, JR, MPX universal
Genuine HT spare/option part. 5 cells, 6 volt, cell size Sub-C. More applications on request.Dimensions: approx 112 x 46 x 23 mmContents:1 piece

€44.90*

Average rating of 0 out of 5 stars

y0428 Extension cable universal180/300 mm
y0428 Length: y0428/01 - 180 mm
In case the servo cable is not long enough.Two selectable lengths:y0428/01 - 180 mmy0428/02 - 300 mm

€5.90*

Average rating of 0 out of 5 stars

T1257 FG Universal Charger with many adaptor cables
Genuine FG spare/option part. Practical 220V charger, specially designed for RC cars. The TX/PACK CHARGER 2 enables the charging of a 7.2V drive battery or the transmitter battery.Two outputs: 11.6 V 180 mA (transmitter charging plug) and 7.2 V 180 mA (drive battery with Tamiya plug). Only use one output at a time!Contents:1 piece

€27.90*

Similar products

Average rating of 0 out of 5 stars

TT1499 Top Tuning Safety Bag for LiPo batteries
Genuine Top Tuning spare/option part.For secure transport and storage of LiPo batteries. For batteries up to approx. 175 x 75 x 70 mm.Contents:1 piece

€12.90*

Average rating of 0 out of 5 stars

y0657 Receiver battery packs standard size, NiMh, 4500 mAh
y0657 Connector: y0657/01 Futaba, JR, MPX universal
Genuine HT spare/option part. 5 cells, 6 volt, cell size Sub-C. More applications on request.Dimensions: approx 112 x 46 x 23 mmContents:1 piece

€44.90*

Average rating of 0 out of 5 stars

y1544 LiPo CellMeter 3 in 1 Tester, balancer and discharger, with servo tester
Genuine rc-car-online spare/option part. Compatible with up to 8S lithium batteries. In addition to the LiPo Tester, the CellMeter also has a built-in servo tester. This makes it possible to check at any time whether the servos are working properly.Technical data:High visibility LCD displayBalancer functionDischarge functionVery accurate battery checkSuitable for Li-Ion, LiPo, LiFe, LiHv, NiCd, NiMh batteries (up to 8 cells)Battery type and Zellenanzahl will be recognized automaticallyVoltage displayed individually for every cellWeight: 48gDimensions LxWxH: 84 mm x 52 mm x 15 mmContents:1 piece

€21.90*

Average rating of 0 out of 5 stars

6546/01 FG receiver battery Ni-MH 6V/2000mAh
Genuine FG spare/option part.Affordable receiver battery Ni-MH 6V/2000 mAh for the electric power supply of receiver and servos, with JR-Graupner bush, rechargeable.Measures:Width: 112 mmHeight: 46 mmDepth: 23 mmUniversal

€23.90*

Average rating of 0 out of 5 stars

TT1530/260 Top Tuning 6000 mAh LiPo receiver battery 2S, 7,4V 5C
Typical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateRecommended charge with 1CSpezification:Tension: 2S / 7,4VCapacity mAh: 6000Case: SoftCable cross section: 12AWG/3,3Length +/- 5 mm: 142 mmWidth +/- 1,5 mm: 44 mmHeight: +/- 1,5 mm: 18 mmWeight +/- 10g: 243 mmCont. current: 5C (30A)Connectors: Universal and EC3, XH-balancer. Battery color may vary!Contents:1 piece

€59.90*

Average rating of 0 out of 5 stars

y0675 Receiver battery pack 5000 mAh Ni-Mh - 1pce.
y0675 Connector: y0675/02 Universal connector
Item N° y0675 Receiver battery pack 5000 mAh Ni-Mh - 1pce.Double-block special battery pack, 6 volt / 5000 mAh, with FG or universal connector.Dimensions: approx. 72 x 53 x 29 mmConnector:UniversalFGEspecially designed for the high current demand in FG 4WD cars NiMh battery pack, fits the stock battery tray.Can be used for FG Evo cars and Competition cars as well.The Sanyo eneloop cell eliminates the annoying problem that a charged battery has often lost a high percentage of its storage capacity after just one week. Also, the differences between individual cells in a pack are sometimes significant, reducing the life and performance of the complete pack. Compared to "normal" NiMh cells the Sanyo eneloop cell has a slightly lower capacity and a slightly higher price (in relationship to its capacity), but you get significant advantages in return. With the recently available improved version of the 2005 introduced and widely acclaimed eneloop cell self-discharge for rc-car related time frames is now more or less nonexistent. One could easily charge the cells at New Year?s Eve and use them at Christmas without noticing a significant loss of capacity. Sanyo eneloop cells show a considerably reduced tendency to failure of individual cells in a battery pack. Even after years eneloop cells usually differ by only a few percent. The voltage of the cells is also slightly higher than with normal NiMh cells, so that more volts are available under load. Especially when used in largescale cars with their usually extremely strong servos, this is a particularly important feature! Chargers which are suitable for NiMh cells will also work for eneloop cells. The basic features of the eneloop XX version are similar to the standard version, but here the priorities were set slightly different. At the expense of reduced (but easy to cope with for rc-car usage) values for load cycles and self-discharge, capacity could be increased by 25%.- Nominal capacity: 2500 mAh- Maximum number of charge cycles: 500- self-discharge: 25% at 1 yearYou can differentiate the two generations of eneloop cells by checking the model name which is written on each eneloop. The "old" cells have written HR-3UTG (AA) on them, the improved eneloop instead HR-3UTGA (AA)!

€74.90*

Average rating of 0 out of 5 stars

y0662 Sanyo Eneloop receiver battery 2000 mAh NiMh, 1 pce.
y0662 Connector: y0662/04 High current connector+ 5.3EUR
Item N° y0662Sanyo Eneloop receiver battery 2000 mAh NiMh, 1 pce.Informations about eneloop cells:eneloopThe Sanyo eneloop cell eliminates the annoying problem that a charged battery has often lost a high percentage of its storage capacity after just one week. Also, the differences between individual cells in a pack are sometimes significant, reducing the life and performance of the complete pack. Compared to "normal" NiMh cells the Sanyo eneloop cell has a slightly lower capacity and a slightly higher price (in relationship to its capacity), but you get significant advantages in return. With the recently available improved version of the 2005 introduced and widely acclaimed eneloop cell self-discharge for rc-car related time frames is now more or less nonexistent. One could easily charge the cells at New Year?s Eve and use them at Christmas without noticing a significant loss of capacity. Sanyo eneloop cells show a considerably reduced tendency to failure of individual cells in a battery pack. Even after years eneloop cells usually differ by only a few percent. The voltage of the cells is also slightly higher than with normal NiMh cells, so that more volts are available under load. Especially when used in largescale cars with their usually extremely strong servos, this is a particularly important feature! Chargers which are suitable for NiMh cells will also work for eneloop cells. UniversalFGBECHigh current- Nominal capacity: 2000 mAh - Maximum number of charge cycles: 1500 - For cars with up to 3 Servos- Self-discharge: 25% after 3 years You can differentiate the two generations of eneloop cells by checking the model name which is written on each eneloop. The "old" cells have written HR-3UTG (AA) on them, the improved eneloop instead HR-3UTGA (AA)!

Variants from €29.90*
€35.20*

Average rating of 0 out of 5 stars

y0663 Sanyo eneloop XX receiver battery 2500 mAh NiMh, 1 pce.
y0663 Connector: y0663/02 Futaba, JR, MPX universal
Item N° y0663Sanyo eneloop XX receiver battery 2500 mAh NiMh, 1 pce.Informations about eneloop cells:eneloop XXThe Sanyo eneloop cell eliminates the annoying problem that a charged battery has often lost a high percentage of its storage capacity after just one week. Also, the differences between individual cells in a pack are sometimes significant, reducing the life and performance of the complete pack. Compared to "normal" NiMh cells the Sanyo eneloop cell has a slightly lower capacity and a slightly higher price (in relationship to its capacity), but you get significant advantages in return. With the recently available improved version of the 2005 introduced and widely acclaimed eneloop cell self-discharge for rc-car related time frames is now more or less nonexistent. One could easily charge the cells at New Year?s Eve and use them at Christmas without noticing a significant loss of capacity. Sanyo eneloop cells show a considerably reduced tendency to failure of individual cells in a battery pack. Even after years eneloop cells usually differ by only a few percent. The voltage of the cells is also slightly higher than with normal NiMh cells, so that more volts are available under load. Especially when used in largescale cars with their usually extremely strong servos, this is a particularly important feature! Chargers which are suitable for NiMh cells will also work for eneloop cells. UniversalFGBECHigh currentThe basic features of the eneloop XX version are similar to the standard version, but here the priorities were set slightly different. At the expense of reduced (but easy to cope with for rc-car usage) values for load cycles and self-discharge, capacity could be increased by 25%.- Nominal capacity: 2500 mAh- Maximum number of charge cycles: 500- For cars with up to 3 servos- self-discharge: 25% at 1 yearYou can differentiate the two generations of eneloop cells by checking the model name which is written on each eneloop. The "old" cells have written HR-3UTG (AA) on them, the improved eneloop instead HR-3UTGA (AA)!

€39.90*

Average rating of 0 out of 5 stars

TT1530/252 Top Tuning 5200 mAh LiPo receiver battery 2S, 7,4V 5C
Specifically made to fit the Losi 5ive-T battery box. Soft case with reinforcement plates at the top and bottom and padding at the ends.Typical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateRecommended charge with 1CSpezification:Tension: 2S / 7,4VCapacity mAh: 5200Case: SoftCable cross section: 12AWG/3,3Length +/- 5 mm: 105 mmWidth +/- 1,5 mm: 60 mmHeight: +/- 1,5 mm: 23 mmWeight +/- 10g: 208 mmCont. current: 5C (26A)Connectors: Universal and EC3, XH-balancer. Battery color may vary!Contents:1 piece

€59.90*

Average rating of 0 out of 5 stars

DYN1460 Dynamite 6V 1700mAh Ni-MH 5-Cell Flat Receiver Pack
Genuine Losi spare/option part. Dynamite 6V 1700mAh Ni-MH 5-Cell Flat Receiver PackFeatures:Extremely affordable high-capacity receiver packs for higher-current-drain RC vehicles Increased run times over standard receiver packs Universal connector plugs directly into the switch harness for all radio systemsDimensions: Length: 88 mmwidth: 19 mmHeight: 35 mm Contents:1 piece

€29.99*

Average rating of 0 out of 5 stars

DYN1444 Dynamite 6V 3000mAh Ni-MH 5-Cell Flat Receiver Pack
Genuine Losi spare/option part.Features:Extremely affordable high-capacity receiver packs for higher-current-drain RC vehicles. Increased run times over standard receiver packs. Universal connector plugs directly into the switch harness for all radio systemsDimensions:Width: 112 mmHeight: 46 mmDepth: 23 mm

€34.99*

Average rating of 0 out of 5 stars

XBC100 Spektrum Smart LiPo Battery Checker und Servo Driver
Genuine Spektrum spare/option part. When using the Spektrum XBC100 Smart Battery Checker with a Spektrum Smart battery, you will be able to see and adjust many of the settings only available with a Spektrum Smart charger. This includes one connection for balance and battery level checking, and providing records like number of cycles, internal battery temperature and exception reports. You can even adjust Smart battery settings right from the XBC100.The XBC100 also features a Qualcomm 3.0 USB charge port, giving you an easy way to keep your mobile device and Spektrum Smart Transmitters charged when USB power ports are scarce. Better yet, the XBC100 gives you the ability to better setup and test your models with the built in servo tester! Center and test your servo endpoints easily with the integrated PWM output port.Finally, all of this is displayed on a full color IPS LCD screen that is designed to be easy to read in direct sunlight and is accessed via a user friendly touch interface. Key Features Battery checker with built in cell balancing Advanced Servo testing feature helps with model setup Spektrum Smart battery technology allows users to take advantage of Smart Battery features Easy to read full color display Qualcomm 3.0 compatible USB power port with Quick Charge for compatible Android and IOS devices (up to 12v and 2 amps) Update port for easy access to updates and new features More than a Balance CheckerPilots and Drivers can stay better informed about their Lipo, LiHv, LiFe and LiIon Batteries with the Spektrum XBC100 Smart Battery Checker. With the Easy to read full color IPS LCD display, quickly see the battery percentage, cell balance, and be notified of abnormal conditions. And if your battery cells are out of balance, the XBC100 can conveniently balance each of your Battery cells to within ±0.005V accuracy. Smart Battery ConnectivityThe XBC100 gives Smart Battery users a simple to use battery checker that gives all the benefits of a balance checker with just one connection of the iC3 connector. And when connected to a Smart Battery, users can check all the integrated parameters such as number of cycles, events such as over discharge and overheating, as well as adjust smart battery settings like auto storage timer and preset charge current. Integrated Servo TesterBuilt in to the XBC100 Smart Battery Checker is a helpful pwm out port that is facilitated to be used as a Servo tester. Easily check your control ranges on any modern servo or esc. Users can Test for binding and current draw right from the checker, no special in line meter required. Qualcomm ® 3.0 USB Charge PortKeep your device charged and ready with the convenient USB power port. Just plug in a charged battery and hit start USB Charging and the XBC100 becomes a fast charging power bank ready to keep your Spektrum Smart Transmitter and mobile devices charged. Support Qualcomm QC 2.0/3.0, compatible with BC1.2 and Apple devices. Maximum output 12V/2A. Contents:1 piece

€49.99*

Customers also viewed

Average rating of 0 out of 5 stars

6546/01 FG receiver battery Ni-MH 6V/2000mAh
Genuine FG spare/option part.Affordable receiver battery Ni-MH 6V/2000 mAh for the electric power supply of receiver and servos, with JR-Graupner bush, rechargeable.Measures:Width: 112 mmHeight: 46 mmDepth: 23 mmUniversal

€23.90*

Average rating of 0 out of 5 stars

y0657 Receiver battery packs standard size, NiMh, 4500 mAh
y0657 Connector: y0657/01 Futaba, JR, MPX universal
Genuine HT spare/option part. 5 cells, 6 volt, cell size Sub-C. More applications on request.Dimensions: approx 112 x 46 x 23 mmContents:1 piece

€44.90*

Average rating of 0 out of 5 stars

T1257 FG Universal Charger with many adaptor cables
Genuine FG spare/option part. Practical 220V charger, specially designed for RC cars. The TX/PACK CHARGER 2 enables the charging of a 7.2V drive battery or the transmitter battery.Two outputs: 11.6 V 180 mA (transmitter charging plug) and 7.2 V 180 mA (drive battery with Tamiya plug). Only use one output at a time!Contents:1 piece

€27.90*

Average rating of 0 out of 5 stars

7106 FG ATS rim silver 65mm - 2pcs.
Suitable for all FG 1:5 models and other makes.Rim with 18 mm square driveRim width: 65mmRim diamter: 95mmColour: Silver

€20.70*

Average rating of 0 out of 5 stars

FG Leopard 4 Sportsline 4WD HT-Edition
Ready for the ultimate Off-Road fun? Four-wheel drive combined with well-tried competition technology in an affordable beginner model. With the Sportsline Leopard 4 you purchase a premium RTR Racing Buggy manufactured of top-quality materials with the potential to win races - completely assembled and ready for racing.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Built on a 4mm aluminium chassis, closed belt drive, 2 differential gears, double wishbones at front and rear axle with many adjusting possibilities as well as large-volume oil-pressure shock absorbers for traction and optimal ground contact. The lateral splash-guard and the almost closed bodyshell prevent engine, servos a.s.o. from dirt. The model is equipped with a powerful 26 cm³ combustion engine with tuning pipe and ready oiled air-filter. The engine runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURDriveshaft bootsProtect ball drive as well as cardan drive against dirt. 4 pairs / 8 piecesValue: 42,90 EURAlloy spur gear carrierUse for 46T - 48 teeth spur gears.Value: 39,90 EURTotal value: 200,30 EUR The RTR version is delivered with assembled and preset 2.4 GHz radio control system and rechargeable batteries, either with painted or clear bodyshell. To complete the non-RTR version with clear bodyshell all popular servos and radio control systems are suitable.Dimensions:Length: 750 mmWidth: 470 mmHeight: 330 mmWheelbase: 534 mmThe video shows the FG-Marder in terrain!

€1,249.95*

Average rating of 0 out of 5 stars

6000CZ30 FG Marder 2WD Legend 30 Years - limited and numbered special edition
To celebrate the 30th anniversary of the legendary Marder 1/6 scale 2WD buggy, FG Modellsport/T2M releases a special edition, limited to 300 numbered pieces, with the original signature of Franz Gröschl on the sticker sheet as well as a top equipment (G260RC Zenoah engine, hi-capacity low friction aluminum shock absorbers and special aluminum engine mounts). with original 260 Zenoah with Low-Friction Alu shocks with alloy enginemount The Models is built on a 4 mm u-bended chassis. All borings of the lower side are countersunk, therefore the screw heads can't bear out.Double wishbones at font and rear axle as well as 4 bulk oil-pressure shock absorbers guarantee perfect ground adherence. All rotating parts are supported by ball-bearings. Rear gear wheels, differential gears and all driving elements are case-hardened. The side guards protect the model from dirt. With original signature of Franz Gröschl. The model is equipped with a powerfull 26 ccm engine which runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 liters enables you to drive about 45 minutes. The engine can be started without difficulties through the integrated pull-start. To complete the models all merchantable servos and radio control systems are suitable.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery

€799.99*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Agency