Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

67405 FG Tuning pipe for Leopard 2020 2WD

Product information "67405 FG Tuning pipe for Leopard 2020 2WD"

Genuine FG spare/option part.

Contents:
  • 1 set

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

Elcon 4 jaw Teflon clutch adjustable for FG / Carson / HPI / Losi Modells, used "1"
Condition see photos.

€29.00*

Average rating of 0 out of 5 stars

6204/01 FG Wire guide for pull starter for Leopard 2WD/4WD
Genuine FG spare/option part. Spare part for the Leopard 2WD/4WD 2010 versionContents:1 piece

€3.90*

Similar products

Average rating of 0 out of 5 stars

7331/02 FG Silencer Leopard RTR, 1 pce.
Item N° 07331/02Silencer Leopard RTR, 1 pce.Spare part for Sportsline Leopard 4WD.

€19.90*

Average rating of 0 out of 5 stars

67299 FG Steel-Power Tuning pipe Leopard/Sportsline 4WD
Genuine FG spare/option part. Spare part for FG Leopard 4WD 2010. Fits for FG Sportsline 4WD 510/530.FG fuel tank #8383 along with tank mount #69238/01 is required for installation on a Leopard 4WD Sportsline. The receiver battery must be relocated as well.Mielke #5062 is required for installation of this pipe.Contents:1 set

€349.95*

Average rating of 0 out of 5 stars

4121Samba Leopard 2WD/4WD NV
Tuned pipe exhaust system for racing, fits FG Leopard 2WD and 4WD from the top manufacturer of high performance exhaust systems.Top quality and optimized performance througout the entire engine's RPM range.Complete set with steel manifold and hardware for sealing and installation.Samba, multiple World and European Champion.

€199.00*

Average rating of 0 out of 5 stars

67298 FG Steel-Power Tuning pipe Leopard 2WD + 4WD Sportsline from 2010 version compl., set
Spare part for the Leopard 2WD 2010 version also suitable for the new Leopard 4WD Sportsline.

€207.00*

Average rating of 0 out of 5 stars

67399 FG Tuned pipe for Leo 2020 2.0 4WD
Genuine FG spare/option part. Contents:1 set

€329.50*

Customers also viewed

Average rating of 0 out of 5 stars

5187/XL2.0 Mielke Losi DBXL 2.0 tuned pipe exhaust system for 26 - 32 cm³
Genuine Mielke spare/option part.The tuned pipe system from premium manufacturer M. Mielke was specifically designed for Losi DBXL 2.0 in combination with large displacement and modified engines.The elaborate, angled design, makes best use of the available space in the DBXL 2.0 allowing for optimum performance! When designing the system, it was especially important to maximize the distance to the battery box of the DBXL 2.0 in order to minimize the thermal load on the battery. At the same time, the large distance improves access to Box. Contents:1 set

€279.00*

Average rating of 0 out of 5 stars

7400/03 FG 3 chamber tuned pipe
Genuine FG spare/option part. Contents:1 piece

€79.90*

Average rating of 0 out of 5 stars

7303 Samba 7 Titan Racing tuned pipe system ESW DMC 50-1101
The Samba 7 titanium gives you a weight saving of 140 grams compared to the steel version. We have tested and optimized the Samba 7 Titan- tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springsDespite of the increased performance fuel consumption remains the same compared to a Samba 6 pipe. The Samba 7 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! New New connection from exhaust to manifold Lower center of gravity through new alignment Also suitable for 510 wheelbaseSamba 7 can also be installed in cars equipped with Magura 2 hydraulic brakes (see pictures).Of course, the Samba 7 tuned pipe system is race legal for racing, with the DMC approval number 50-1101 engraved. The Samba 7 - tuned pipe system comes with an installation kit.Fits: All On-road cars from FGContrastBergonzoniHarmGeniusand many others as well<Will fit medium (510 mm) wheelbase cars from FG as wellOriginal statement from Samba: "This new tuned pipe system is the result of the development"

€399.00*

Average rating of 0 out of 5 stars

y1036 HT rose joints with conical spacers
Genuine HT spare/option part. Dimensions:A = 5 mmB = 6 mmC = 8 mmD = 13 mmContents:2 pieces rose joints4 pieces conical spacers

€18.90*

Average rating of 0 out of 5 stars

y1337 Epoxy P-R-M Race brake discs for FG / Smartech / Carson
Top quality epoxy P-R-M Race brake discs with 10 dirt slots for removing dirt and abrasion, which will be transferred to the outside by the discs rotation. The epoxy P-R-M Race brake disc provides an optimal deceleration of the car without the unwanted fading (poor braking performance due to increased heat buildup)! The best braking action when using the epoxy P-R-M Race brake disc is achieved by the combination of the epoxy brake discs and steel brake pads (8456 or y19218). The epoxy P-R-M Race brake discs fit mechanical front and rear brakes on FG / Smartech / Carson cars with brake pads 8456 recommended for these applications.1 pair (2 pieces) Dimensions: Outer diameter: 60 mm Thickness: 2 mmsocket for 18 mm square wheel drive

€22.90*

Average rating of 0 out of 5 stars

Elcon 4 jaw Teflon clutch adjustable for FG / Carson / HPI / Losi Modells, used "1"
Condition see photos.

€29.00*

Average rating of 0 out of 5 stars

FG Formula 1 Sportsline
Completely mounted, with a 26 cm³ combustion engine and final speed of almost 100 km per hour, what else would you want?A further additional improvement is the installed front disk brake. A clear polycarbonate bodyshell is included.Quality and high-class equipment to a sensible price.Technical description of the Formula 1 Sportsline chassis:The undercarriage of the FG Formula 1 is built on a high-strength 5 mm alloy chassis. All chassis borings (screws) are countersunk. The front and rear axle with their various adjusting possibilities as king pin angle, trailing effect etc. consist of double delta wishbones. The double delta wishbones of the rear axle are supported by additional track rods which enable you a very fast set-up. All adjustments can be made without a dismounting of parts according to the fixed wishbone threaded rods with right-/left-handed thread.The model is equipped with 4 alloy oil-pressure shock absorbers. The push-rod suspension ensures the transmission between single wheel suspension and shock absorber.We deliver this chassis with a powerful 26 cc combustion engine. The engine's power is transmitted over a four-block Teflon clutch on a synchronous belt drive. This synchronous belt drive is also designed for a higher driving power. The BBS wheels and the tires are copies of the big models. All rotating parts are supported by ball bearings.The construction of the Formula 1 chassis is not identical with the other 1:5 scale FG models such as Merc. C-Class, Race Truck a.s.o. and therefore it can?t be converted into or from these models by a conversion kit.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 960 mmWidth: 440 mmHeight: 230 mmWheelbase: 620 mmFormular 1 models in action!

€1,279.00*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Agency