6484/05 FG Alloy shock absorber piston 14,8mm, bore Ø1,9mm

€17.50*

Available

Product number: fg_6484_05

EAN: 3410564532270

Product information "6484/05 FG Alloy shock absorber piston 14,8mm, bore Ø1,9mm"

Genuine FG spare/option part.

The exact rate of oil flow is determined by 5 borings. An o-ring reduces the friction between damper piston and damper housing.

The bore diameter of the oil borings has been enlarged on these pistons. Now it is possible to use FG damper oil with a viscosity of 2000 to 4000.

5-bore alloy shock absorber piston suitable for 6084, 6481 und 6482. For use with treaded piston rods only!

Contents:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

67336 FG Shock absorver protect le./ri. Leopard 2WD/4WD

Genuine FG spare/option part.Spare part for the Leopard 2WD/4WD 2010 versionContents:2 pieces

€8.30*

y7087/12 Replacement bushings for alloy shock shaft end

Genuine HT spare/option part. Dimensions:Inner diameter: 4 mm/li>Outer diameter: 5.5 mm/li>Width: 5 mmContents:4 pieces

€3.90*

TT0198 Top Tuning Bubble-Ex for 1/10 up to 1/5 scale rc-cars

Genuine Top Tuning spare/option part. Indispensable for optimal suspension tuning!Vacuum container for removal of bubbles from shock fluid when filling shocks.A vacuum pump is built into the lid. The tray has four holes each to accept 1/10, 1/8, 1/6 and 1/5 scale shocks.Suitable for shock absorbers from Losi, Mecatech, BWS, Arrma, Traxxas, FG, Carson, HPI and many more, as long as they have a suitable diameter. All shocks from 15 to 32 mm outer diameter can be used in the Bubble Ex to be "de-bubbled". Tray bore sizes: No. 1 = 32 mm diameter No. 2 = 21 mm diameter No. 3 = 17.5 mm diameter No. 4 = 15 mm diameter The maximum length of the shock absorber up to the upper edge of the body is about 150 mm, whereby longer shock absorbers can also be partially compressed for insertion. (e.g Losi 5ive-T and many more)Operation:Unlock the vacuum pump by turning it slightly to the left, the pump handle then extends a little. The small plug with handle is used to close and ventilate the container. To build up the vacuum, the plug must be in the down position.The small membrane on the opposite side serves as an indicator for whether a vacuum is present. Only when this is curved outwards the lid of the container can be opened again without any effort. Content: Can with integrated vacuum pump Shock tray

€49.90*

y1246, Hobbythek/GPM Dirt-Cover line for FG, Carson/Smartech and Conrad cars, set

Regular price: 51,80 EURhe set is suitable for all FG models + Carson/Smartech/Reely (not for FG Leopard + Carson Gas Devil, Hell Devil, CRT 4x4, Smartech Thunderbolt), please use order no. y1247.Content of delivery:- y0514 GPM Shock-Cover für FG, Carson, Smartech, Conrad- GPM Air filter cover, no. BJAFCO- GPM Starter cover, no. BJPSCO y0514 GPM Shock-Cover für FG, Carson, Smartech, ConradThese protective covers prevent the shock piston rods and seals from wear caused by dirt. They fit most 1/6 and 1/5 scale shocks. Not for Gas Devil, Thunderbolt, Helldevil, CRT 4x4!- total length 150 mm for all FG / Carson / Smartech / Conrad and all shocks with a spring diameter from 22 to 30 mm.Set of 4GPM Air filter cover, no. BJAFCOGPM air filter cover which fits easily over your existing air filter. A rubber band at the bottom holds the cover in place. Maintenance of the main filter will be significantly reduced, especially in very dusty environments. Fits all common filters, foam or fabric (K&N) style.GPM Starter cover, no. BJPSCO Keeps cool air coming to your engine by keeping dirt and grass from clogging up the pull starter area. Easily wipe off anything not deflected away. Installs on the starter cover with hook & loop tape. With metal cable management.When using the FG monster / stadium model is cut an additional hole for the support of the lateral support plate.

€39.50*

7205/07 FG Aluminum spring plate small 16mm

Genuine FG spare/option part. Dimensionally stable aluminium spring plate for all FG shock absorbers with a 16 mm housing. Replaces Item no. 07092, for damper springs with an inner diameter of 16mm, with a 4mm groove for the piston rod.Contents:2 pieces

€19.70*

This product is currently not available.

y0976 Alloy shock shaft end, long or short to choice

y0976 Version: y7087/01 - Short

y7087/01 Alloy shock shaft end shortReplaces FG 7087/01.Fits all FG shocks, Carson 2WD and many other 1/5 and 1/6 scale models. Replaceable bushings.Dimensions:Length overall: 22,5 mm, about 17 mm to to center of bushingThread for shock shaft: M4Bushing inner diameter: 4 mmContents:2 piecesy7087/02 Alloy shock shaft end longGenuine HT spare/option part.Replaces FG 7087/02.Fits all FG shocks, Carson 2WD and many other 1/5 and 1/6 scale models. There are replaceable bushings.Dimensions:Length overall: 27 mm, about 22 mm to to center of bushingThread for shock shaft: M4Bushing inner diameter: 4 mmContents:2 pieces

€14.90*

y0041 Aluminum spring perches for Losi 5ive-T/2.0/B and Mini shocks

Genuine HT spare/option part.Aluminum spring perches for Losi 5ive-T/B and Mini shocks; with slot for fast and easy change of shock springs. Direct replacement for the stock plastic part.Contents:2 pieces

From €19.90*

Details

y0514 GPM Shock-Cover for FG, Carson, Smartech, Conrad, set.

These protective covers prevent the shock piston rods and seals for wear caused by dirt. They fit most 1/6 and 1/5 scale shocks.Not suitable for Gas Devil, Thunderbolt, Helldevil, CRT 4x4!- total length 150 mm for all FG / Carson / Smartech / Conrad and all dampers with a diameter from 22 to 30 mm. Set of 4

€14.90*

y1335/01 Replacement clips for Suspension limiter Set

Genuine HT spare/option part. Replacement clips for Suspension limiter no.: Clips with 1,5 mm, 2 mm und 3 mm size included in the set. The clips fit shock shafts up to 4.5 mm diameter. Suitable for the following shock : y1137 GPM - Spezial Cross shocks (all versions) 2011 Mecatech Big Bore Shocks y1193 Mecatech Klick-Shocks, externally adjustable FG 6083/6084 shocks front / rear 66291/66292/66293 alloy shocks 08 67320/67330 alloy shocks for Leopard 2WD/4WD 7202/7203/7204 alloy shocks 04 305029/305030 shocks Comanche / Attack Evo 32488 Carson 1/5 front shocks 32574 Carson 1/5 rear shocks Cad shocks (all versions ) Package includes:6 clips 1.5 mm thick 6 clips 2 mm thick6 clips 3 mm thick

€8.20*

y7087/01 Alloy shock shaft end short

Genuine HT spare/option part.Replaces FG 7087/01.Fits all FG shocks, Carson 2WD and many other 1/5 and 1/6 scale models. Replaceable bushings.Dimensions:Length overall: 22,5 mm, about 17 mm to to center of bushingThread for shock shaft: M4Bushing inner diameter: 4 mmContents:2 pieces

€14.90*

7205/06 FG Plastic adjusting rings 16 mm

Genuine FG spare/option part.CNC-manufactured adjusting rings for the 16 mm FG shock absorbers with external thread. Inserted o-ring for securing. The use of plastic material prevents a jamming of the thread.Dimensions:Outer diameter: 22,4 mmWidth: 5 mm + 2 mm sleeveContents:2 pieces

€11.50*

y0243 Tension adjustment clips

Genuine HT spare/option part. For easy, precise and equal adjustment of spring tension, fits all 1/5 and 1/6 shocks with a body diameter of 15 - 16 mm.Set with two clips each of 1, 2, 3, 4, 5 und 6 mm thickness.Contents:1 set

€3.95*