67151 FG ABS-splash guard le./ri. Leopard 2WD/4WD, TR2, TR4

€85.00*

Prices incl. VAT plus shipping costs

No longer available

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Product number: fg_67151

EAN: 3410564536148

Product information "67151 FG ABS-splash guard le./ri. Leopard 2WD/4WD, TR2, TR4"

Genuine FG spare/option part.

Anti splash guard for the new FG Leopard 2WD and 4WD

Contents:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Customers also bought

67100 FG Body Leopard Sportsline, white, 1St.

Item N° 67100 Body Leopard Sportsline, white, 1St.The bodyshell is made from colored (not painted!) polycarbonate.

€124.95*

6050 FG Plastic gear carrier 60 mm

Genuine FG spare/option part. Plastic version, 60 mm diameter. For 48T - 46T spur gears.Also available in aluminum .Content:1 piece

€12.50*

67545 FG Body bolts, 2 pcs.

Item N° 67545Body bolts, 2 pcs.Spare part for Sportsline Leopard 4WD.

€3.50*

Details

7155 FG Body mount short adjustable

Genuine FG spare/option part. Adjustable body mount with heigt-adjustable body support.Dimensions:Length: 55 mmDiameter: 8 mmThe Base: 10 mmFor all cars and body shells.Contents:1 piece

€9.95*

Details

y0521 Madmax/HPI-rim to FG-car wheel adaptor

y0521 Version: y0521/01 - for M8 wheel shafts+ 3EUR

Genuine HT spare/option part.This adaptor allows you to install all MadMax/HPI tire/rim combinations on FG, Carso, Smartech 2WD/4WD and other cars with the same wheel shaft configuration. Losi 5ive tires can be used as well, but they hey have to be mounted on MadMax/HPI rims because Losi rims are too thick at the center. The adapter is drilled for 8 mm wheel shafts (FG, Smartech/Carson and many more!), hex size of wheel drive and wheel nut is 24 mm hex with M18x1.0 thread (same as HPI).Please note:FG wheel shafts come with either M6 or M8 thread size. It can even happen that a vehicle has different thread sizes front and rear! Therefore, please make sure which version is required before placing an order.Converting your car takes only a couple of minutes with this easy to install adaptor. just see picture "installation instruction" for a schematic installation.Contents:2 pieces

Variants from €39.90*

€42.90*

Similar products

67209/01S FG Mini Pin tyres Evo S, with inserts

Genuine FG spare/option part. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Contents:2 pieces/1 pair

€39.90*

67221 FG Foam tire insert 56 x 17 x 407 mm, 2 pcs.

Item N° 67221 Foam tire insert 56 x 17 x 407 mm, 2 pcs.

€19.90*

67209/02 FG Mini Pin M / OR tires, inserts

Genuine FG spare/option part.Content:2 pieces / 1 pair

€34.95*

67160/01 FG Body Leopard 2 Comp., Leo 2020 2WD/4WD, (lenght +26mm), transparent, 1 pce.

Spare part for the Leopard 2WD/4WD Competition and FG LEO 2020 2WD.Painting tips:

€139.50*

Details

67160/05 FG Body Leopard Sportsline, ready plastered

Genuine FG spare/option part.The bodyshell is made from colored (not painted!) polycarbonate and will be delivered without rear wing.The original FG decal set is included, ready pasted!Content:1 piece

€124.95*

67213/03 FG Mini block H / OR tires with inserts, 2 pcs.

Item N° 67213/03 Mini block H / OR tires with inserts, 2pcs.

€25.00*

67150 FG Body shell Leopard Comp. 4WD

Genuine FG spare/option part.Fits for the Leopard 4WD 2010Contents:1 piecePainting tips:

€124.95*

Details

67206 FG Truggy wheel 1:6, black

Genuine FG spare/option part.Dimensions:Diameter: 140 mmWidth: 80 mm

€15.90*

67205 FG Off-Road spoke wheel 1:6, white

Genuine spare/option part.Suitable for the new FG Off-Road Buggy and Leopard tires. Fits 18 mm square wheel drives.Dimensions:Inner diameter: approx. 125 mmouter diameter: approx. 139 mmInner diameter of glueing slot: approx. 130 mmWidth: approx. 65 mmContents:2 pieces

€25.90*

67166 FG Vehicle decals Leopard 2, RTR, set

Standart stickers for Leopard 2.

€65.90*

67214/05 FG Mini block M / OR tires, glued, white, 2pcs.

Item N° 67214/05 Mini block M / OR tires, glued, white, 2pcs.Completely new revised and in important details improved Mini Block Off-Road tires. The rubber material is more wear resisting, grip and traction were improved and the tire wall was reinforced to prevent a tearing of the rubber. The tire inserts are now stronger and therefore more wear resistant.The FG Mini Block tires are especially well-suited for slightly loose and humid ground. We recommend the M and S version in the front and the rear. The H version with slightly less grip can be used for the front axle. The Mini Block tires are also well-suited as front tires for 2WD models in combination with the Mini Pin tires on the rear axle. The tires are ready glued on the new Leo 1:6 wheels. For the assembly you need the 12mm square wheel drivers (ItemN°. 06107/07).The glued tires are not suitable for the FG models Marder, Beetle, Off-Road Buggy and Monster models.

€54.90*

67207/06 FG Truggy Pin 185 - H / OR tires, glued, black, 2 pcs.

Genuine FG spare/option part.With a Ø of 185mm extremely large and 85mm wide OR Truggy tire. Glued on new Truggy rim. A lot of grip, therefore high curve speeds on almost every surfaces possible. Available in different hardnesses. Suitable for all FG Buggy and Monster models. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.

€71.50*

Customers also viewed

FG Formula 1 Sportsline

Completely mounted, with a 26 cm³ combustion engine and final speed of almost 100 km per hour, what else would you want?A further additional improvement is the installed front disk brake. A clear polycarbonate bodyshell is included.Quality and high-class equipment to a sensible price.Technical description of the Formula 1 Sportsline chassis:The undercarriage of the FG Formula 1 is built on a high-strength 5 mm alloy chassis. All chassis borings (screws) are countersunk. The front and rear axle with their various adjusting possibilities as king pin angle, trailing effect etc. consist of double delta wishbones. The double delta wishbones of the rear axle are supported by additional track rods which enable you a very fast set-up. All adjustments can be made without a dismounting of parts according to the fixed wishbone threaded rods with right-/left-handed thread.The model is equipped with 4 alloy oil-pressure shock absorbers. The push-rod suspension ensures the transmission between single wheel suspension and shock absorber.We deliver this chassis with a powerful 26 cc combustion engine. The engine's power is transmitted over a four-block Teflon clutch on a synchronous belt drive. This synchronous belt drive is also designed for a higher driving power. The BBS wheels and the tires are copies of the big models. All rotating parts are supported by ball bearings.The construction of the Formula 1 chassis is not identical with the other 1:5 scale FG models such as Merc. C-Class, Race Truck a.s.o. and therefore it can?t be converted into or from these models by a conversion kit.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 960 mmWidth: 440 mmHeight: 230 mmWheelbase: 620 mmFormular 1 models in action!

€1,279.00*

Configure now

LOS252085 Losi Front Axle Set, Super Baja Rey

Genuine Losi spare/option part. Contents:2 pieces

€79.99*

6050 FG Plastic gear carrier 60 mm

Genuine FG spare/option part. Plastic version, 60 mm diameter. For 48T - 46T spur gears.Also available in aluminum .Content:1 piece

€12.50*