Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

67238 FG Alloy gear flange engine mount Leopard 2WD/4WD

Product information "67238 FG Alloy gear flange engine mount Leopard 2WD/4WD"

Genuine FG spare/option part.

Spare part for the Leopard 2010 2WD/4WD verison.

Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

y1423 Engine flange for engine quick mount, G320 version available for FG 1/5 models
y1423 Version: y1423/01 for all Zenoah and Chung Yang engines up to 30 cm³
Genuine HT spare/option part. For fitment on additional engines or as a spare part for engine quick mount y1421. The engine flange is available in two versions:y1423/01 for all Zenoah and Chung Yang engines up to 30 cm³ with standard bolt pattern 50 x 36 mmy1423/02 for Zenoah G320 - For installation of a Zenoah G320 in a FG Evo (Model range from 2004 till 2014). Fits the standard quick mount.When mounting the motor flange the bolts/nuts must be tightened together in small steps. To mount the studs from y1421/01 or the screws from y1421/02 the use of thread locking compound (link) is required.Please note: y1423/01 does not fit in combination with Zenoah OEM clutch!

€39.95*

Average rating of 0 out of 5 stars

1039 FG Alloy gear plate Evo 04 - 08
Genuine FG spare/option part.Only suitable for alloy gear flange-engine mount 1040/05.See below for layshaft 10x19x7 mm and clutch bell 10x22x6 mm bearings.Content:1 pieces

€54.90*

Average rating of 0 out of 5 stars

7450 FG 2-speed gear box 1:5 2WD
2-speed gear box, retrofotting is possible for Smartech/Carson C5, all 1:5 2WD FG models except Formula 1 + FG EVO 2020, adjustable shift point, high reliability, gear wheels can be changed in no time. During a competition we recommend to use the small gearwheels with 16-26 teeth in alloy oder steel.If you use the gear wheels (38 teeth) you need the alloy hub A 47mm ().Contained pinions: 22 to 42 teeth and 24 to 40 teeth.Contents:1 piece

€234.95*

Similar products

Average rating of 0 out of 5 stars

67235/01 FG Alloy rear axle mount left Leopard, 1 pce.
Genuine FG spare/option part.Spare part for the Leopard 2010 version.

€148.50*

Average rating of 0 out of 5 stars

67264 FG Aluminium bearing adapter f. front axle for Leopard 2WD, 1pce.
Item N° 67264Aluminium bearing adapter f. front axle, 1pce.Spare part for the Leopard 2010 2WD version

€5.90*

Average rating of 0 out of 5 stars

67236/01 Alloy rear axle mount right Leopard Competition
Genuine FG spare/option part.Alloy rear axle mount right Leopard 2WD/4WD.

€148.50*

Average rating of 0 out of 5 stars

67266 FG Front upper alloy wishbone Leopard 2WD, 1pcs.
Item N° 67266Front upper alloy wishbone Leopard 2WD, 1pcs.Spare part for the Leopard 2WD 2010 version

€29.90*

Average rating of 0 out of 5 stars

67260/05 FG Ball-and-socket joint 7mm for Leopard 2WD/4WD, 4pcs.
Item N° 67260/05 Ball-and-socket joint 7mm, 4pcs.Spare part for the Leopard 2010 2WD/4WD version

€2.90*

Average rating of 0 out of 5 stars

67299/01 FG Steel-Power Tuning pipe Leopard/Sportsline 4WD, 1pce.
Item N° 67299/01 FG Steel-Power Tuning pipe Leopard 4WD, 1pce.Spare part for the Leopard 2010 4WD version

€291.10*

Average rating of 0 out of 5 stars

67299/02 FG Manifold f. Tuning pipe 67299/01, black f. Leopard 4WD, 1pce.
Item N° 67299/02 Manifold f. Tuning pipe 67299/01, black f. Leopard 4WD, 1pce.Spare part for the Leopard 2010 4WD version

€75.90*

Average rating of 0 out of 5 stars

67257 FG Aluminium front axle mount B Leopard 2WD
Genuine FG spare/option part. Content:1 piece

€59.90*

Average rating of 0 out of 5 stars

67225/01 FG Alloy wishbone mount 2°, left for Leopard 2WD/4WD, 1pce.
Item N° 67225/01 Alloy wishbone mount 2°, left for Leopard 2WD/4WD, 1pce.Spare part for the Leopard 2010 2WD/4WD version

€39.90*

Average rating of 0 out of 5 stars

67225/02 FG Alloy wishbone mount 2°, right for Leopard 2WD/4WD, 1pce.
Item N° 67225/02 Alloy wishbone mount 2°, right for Leopard 2WD/4WD, 1pce.Spare part for the Leopard 2010 2WD/4WD version

€39.90*

Average rating of 0 out of 5 stars

67256 FG Aluminium front axle mount A Leopard 2WD, 1pce.
Item N° 67256 Aluminium front axle mount A Leopard 2WD, 1pce.Spare part for the Leopard 2WD 2010 version

€59.90*

Average rating of 0 out of 5 stars

67287 FG Front aluminium damper plate, Leopard 2WD/4WD, 1pce.
Item N° 67287Front aluminium damper plate, Leopard, 1pce.Spare part for the Leopard 2010 2WD/4WD verison

€63.70*

Customers also viewed

Average rating of 0 out of 5 stars

7384 FG Zenoah engine G260 RC
Genuine FG spare/option part.The engine housing of the Zenoah G260RC is identical with the housing of the G230RC 04 and therefore this engine is also suitable for all FG models and other makes. The G260RC is equipped with a 26ccm cylinder and the corresponding piston. It has a power of approx. 3,9HP.Power charactaristics::3,9HP - 14000 r.p.m.1,79 Nm - 10000 r.p.m.195000 r.p.m. Maximum speed.Contents:1 piece

€364.95*

Average rating of 0 out of 5 stars

7102 FG Front wishbone pin - 2pcs.
6 x 87 mm

€9.90*

Average rating of 0 out of 5 stars

7450 FG 2-speed gear box 1:5 2WD
2-speed gear box, retrofotting is possible for Smartech/Carson C5, all 1:5 2WD FG models except Formula 1 + FG EVO 2020, adjustable shift point, high reliability, gear wheels can be changed in no time. During a competition we recommend to use the small gearwheels with 16-26 teeth in alloy oder steel.If you use the gear wheels (38 teeth) you need the alloy hub A 47mm ().Contained pinions: 22 to 42 teeth and 24 to 40 teeth.Contents:1 piece

€234.95*

Average rating of 0 out of 5 stars

1039 FG Alloy gear plate Evo 04 - 08
Genuine FG spare/option part.Only suitable for alloy gear flange-engine mount 1040/05.See below for layshaft 10x19x7 mm and clutch bell 10x22x6 mm bearings.Content:1 pieces

€54.90*

Average rating of 0 out of 5 stars

GPM Part 13 SCS13 sponge rubber plug for volume compensation piston, 2 pcs.
Self adhesive backed.

€2.60*

Average rating of 0 out of 5 stars

FG Formula 1 Sportsline
Completely mounted, with a 26 cm³ combustion engine and final speed of almost 100 km per hour, what else would you want?A further additional improvement is the installed front disk brake. A clear polycarbonate bodyshell is included.Quality and high-class equipment to a sensible price.Technical description of the Formula 1 Sportsline chassis:The undercarriage of the FG Formula 1 is built on a high-strength 5 mm alloy chassis. All chassis borings (screws) are countersunk. The front and rear axle with their various adjusting possibilities as king pin angle, trailing effect etc. consist of double delta wishbones. The double delta wishbones of the rear axle are supported by additional track rods which enable you a very fast set-up. All adjustments can be made without a dismounting of parts according to the fixed wishbone threaded rods with right-/left-handed thread.The model is equipped with 4 alloy oil-pressure shock absorbers. The push-rod suspension ensures the transmission between single wheel suspension and shock absorber.We deliver this chassis with a powerful 26 cc combustion engine. The engine's power is transmitted over a four-block Teflon clutch on a synchronous belt drive. This synchronous belt drive is also designed for a higher driving power. The BBS wheels and the tires are copies of the big models. All rotating parts are supported by ball bearings.The construction of the Formula 1 chassis is not identical with the other 1:5 scale FG models such as Merc. C-Class, Race Truck a.s.o. and therefore it can?t be converted into or from these models by a conversion kit.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 960 mmWidth: 440 mmHeight: 230 mmWheelbase: 620 mmFormular 1 models in action!

€1,279.00*

Average rating of 0 out of 5 stars

6486 FG Alloy engine mount big for 1:6 2WD Zenoah alloy - 1pce.
Big alloy engine mount suitable for FG 2WD 1/6 cars with CY / Zenoah G230/240/260/270 engine.

€76.90*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Agency