1039 FG Alloy gear plate Evo 04 - 08

€54.90*

Available

Product number: fg_1039

EAN: 3410564500095

Product information "1039 FG Alloy gear plate Evo 04 - 08"

Genuine FG spare/option part.

Only suitable for alloy gear flange-engine mount 1040/05.

See below for layshaft 10x19x7 mm and clutch bell 10x22x6 mm bearings.

Content:

1 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

67345 FG Gear wheel protection Leo 2 und Leo 4 Competition, set

Genuine FG spare/option part.Gearwheel protection made of transparent polycarbonate for Leo 2 and Leo 4 Competition, suitable for the alum. gear plate 1039 with gear brake and gearwheels 38-48 teeth. According to new regulations a gearwheel protection is necessary for taking part at national and international races since 2013.

€75.90*

6036 FG Ceramic ball bearings, sealed 10x19x7 mm

Genuine FG spare/option part. Why ceramic? Besides corrosion and wear resistance ceramic balls are smoother and have a better shape stability; resulting in less drag from the bearing itself.Are used in all FG and Carson models for bearing the gearshaft.Contents:2 pieces

€20.90*

6036/05 FG bearing set 10x19x7 with grease filling - 2 pcs

Item N° 6036/5 FG bearing set 10x19x7 with grease filling - 2 pcs

€15.90*

This product is no longer available.

6040 FG Ceramic ball bearings 10x22x6 mm

€23.90*

6040/05 FG bearing set 10x22x6 with grease filling - 2 pcs

Item N° 6040/5 FG bearing set 10x22x6 with grease filling - 2 pcs

€11.90*

This product is no longer available.

Ball bearings for FG, sealed, diverse sizes

Genuine HT spare/option part. Dimensions:Alloy differentials 15 x 28 x 7 mmPlastic differentials 12 x 28 x 8 mmClutch bell(except standard Formula 1) 10 x 22 x 6 mmLayshaft 10 x 19 x 7 mm Wheel bearing 8 x 22 x 7 mmContents:1 pair / 2 pieces

€10.70*

Details

Similar products

1018/01 FG Tuning Throttle linkage

Genuine FG spare/option part. Tuning rods with flexible ball head for the screw on the engine.Fits on all FG models with lying engine.Contents:1 piece

€8.90*

1018/05 FG Spacer bushing 5 x 20 mm for raising throttle linkage

Original Losi Ersatz-/Tuningteil.Spare parts for Evo Porsche to get there without any problems with the linkage on the fuel tank. But also a very useful distance bolts of it is because the gas / brake / hydraulic linkage to the servo to insert later. Therefore will make the bending of the linkage in most superfluous.The recommended screw us with the part number 6724/12 available as a link in the lower part of the page for accessories.Contents:1 piece

€3.90*

1074/01 FG Guide bush without collar

Genuine FG spare/option part. Is needed for 1074. Dimensions:6 x 8 x 10 mmContents:4 pieces

€3.50*

1075 FG Rear alum. damper plate EVO/Competition

Genuine FG spare/option part.The damper plate 2011 received further adjustment borings for the shock absorbers. According to a modified set-up the shock absorbers can be mounted much flatter in combination with the rear alum. damper mount. The model therefore has much more cornering grip.Suitable for the Competition 07-510 and 07-530 models as well as for the Competition EVO 08-510 and EVO 08-530 models.Contents:1 piece

€48.30*

1038 FG Rear bowden cable holder Evo 04 - 08

Genuine FG spare/option part. Is sheeted in the Evo 04 / 08 in connection with the mechanical disk brake.Only suitable for Evo 04-08 gear plate 1039Content:1 pieces

€29.90*

1078/01 FG Alloy upright extension for Evo 04 - 14

Genuine FG spare/option part. Suitable for all FG models with original FG alloy uprights (6477). Not suitable for F1 models. Contents:1 piece

€21.90*

1072/03 FG Rear alum. damper mount 2011 for Evo 04 - 14

Genuine FG spare/option part.The mounting of the rear damper mounts allow a higher pitch of the rear shock absorber.The model therefore has more stability in curves. Suitable for the FG Competition / EVO 04- 14 models.Contents:2 pieces

€50.50*

1071/06 FG Ball guide 5,5 mm front, for Evo 2020.2

Genuine FG spare/option part. for FG Evo 2020.2.Can also be installed on FG Evo 2020 using the FG 1071/04 clambing bolts.Content:1 piece

€13.90*

1071/05 FG Stabilizer rod mount 4 mm rear, for Evo 2020

Genuine FG spare/option part. FG Stabilizer rod mount 4 mm rear, for Evo 2020Content:4 piece

€38.50*

1071/07 FG Ball socket 5,5 mm front, for Evo 2020.2

Genuine FG spare/option part. for FG Evo 2020.2Can also be installed on FG Evo 2020 using the FG 1071/04 clambing bolts.Content:1 piece

€13.90*

1013/04 FG Battery pack holder for Evo 2020

Genuine FG spare/option part. for FG Evo 2020Dimensions:Distance between holes: 120 mmTotal length: 137 mmContent:1 piece

€25.90*

1063/02 FG Spacer bushing, rear axle brace Evo truck 04 - 08

Genuine FG spare/option part. When installing the higher Truck rear axle riser plates, these spacer are needed to compensate for the increased height difference between engine mounts (1063/01 and 1040/05) and rear axle brace 1063.Small spacer: 8 mm hex, 9.1 mm height, 4 mm bore.Large spacer: 10 mm hex, 9.1 mm height, 5 mm bore.You'll need a longer screw (M4x20) for installation of the r/h engine bracket 1063/01.Fits for Evo 04 - 08. Contents:2 pieces

€4.90*

Customers also viewed

7909/01 FG Program card

Genuine FG spare/option part. Small and light program card for mobile use to change or adjust parameters of brushless control FG order number: 7909 fast and clearly. Supply 2S-6S Li-Po (7.4 22V)BEC 6V/3ADimensions: 55 x 48 x 38 mmWeight: 185gContents:1 piece

€32.90*

5020/01 FG Front bumper Porsche GT2/GT3

Genuine spare/option part.Suitable for FG Porsche GT2/GT3 body.Dimensions:Length: 340 mmWidth: 115 mmContents:1 piece

€34.95*

2006/09 FG Brake lever - 1pce.

Suitable for Collari master cylinder ().

€24.20*

FG Leopard 4 Sportsline 4WD HT-Edition

Ready for the ultimate Off-Road fun? Four-wheel drive combined with well-tried competition technology in an affordable beginner model. With the Sportsline Leopard 4 you purchase a premium RTR Racing Buggy manufactured of top-quality materials with the potential to win races - completely assembled and ready for racing.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Built on a 4mm aluminium chassis, closed belt drive, 2 differential gears, double wishbones at front and rear axle with many adjusting possibilities as well as large-volume oil-pressure shock absorbers for traction and optimal ground contact. The lateral splash-guard and the almost closed bodyshell prevent engine, servos a.s.o. from dirt. The model is equipped with a powerful 26 cm³ combustion engine with tuning pipe and ready oiled air-filter. The engine runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURDriveshaft bootsProtect ball drive as well as cardan drive against dirt. 4 pairs / 8 piecesValue: 42,90 EURAlloy spur gear carrierUse for 46T - 48 teeth spur gears.Value: 39,90 EURTotal value: 200,30 EUR The RTR version is delivered with assembled and preset 2.4 GHz radio control system and rechargeable batteries, either with painted or clear bodyshell. To complete the non-RTR version with clear bodyshell all popular servos and radio control systems are suitable.Dimensions:Length: 750 mmWidth: 470 mmHeight: 330 mmWheelbase: 534 mmThe video shows the FG-Marder in terrain!

€1,249.95*

1061 FG Alloy rear diff mount left Evo 04 - 08

Genuine FG spare/option part. One piece rear diff mount with different adjusting points for the upper wishbone.Only for Evo 04-08.

€54.90*

1013/06 FG Shorty battery holder EVO 2020

Genuine FG spare/option part. Shorty battery holder which has been specifically designed for the EVO 2020 and Evo 2020.2. For a very low center of gravity, including fixing belt.Contents:1 piece

€65.90*

Samba MOCA Cruze 1/5 TC bodyshell clear 1mm

Genuine Samba spare/option part. The body shell is neither cut nor drilled, clear and can therefore be adopted to all touring cars with a 530/535 mm wheelbase.We have decided to make a new TC bodyshell to offer a new car from the WTTC series for the 5th scale drivers.Currently the most sought after large scale body shell with optimal aerodynamicsMaterial thickness 1 mm. The body shell consists of one part.Precut, the final cutting must be made according to the chassis you use it on.Width front / rear: 392 mm.Contents:1 piece

€89.90*