Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

6432/02 FG Steel pinion 19 teeth - 1pce.

Product information "6432/02 FG Steel pinion 19 teeth - 1pce."

Item N° 6432/02
Steel pinion 19 teeth - 1pce.


For combination with 44T main spur gear.
Diameter 32.7 mm
Bore 10 mm
Total width 18 mm
Tooth width 11.5 mm
Module: m=1,5

Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

6491/01 FG Steel spur gear 44T - 1 pcs
Outer diameter 69 mmInner diameter 26 mmBolt circle 3 x 35 mmWidth 10 mmModule m=1.5

€58.90*

Average rating of 0 out of 5 stars

7100 FG Adjusting clip for 16 mm axle, 16 pcs.
These adjusting clips allow a faster adjustment of the wishbones. Suitable for front and rear suspension. The set contains 16 adjusting clips in 2 and 6mm size for 6 mm axles.

€9.50*

Average rating of 0 out of 5 stars

6422 FG Plastic gearwheel 44 teeth - 1pce.
44 teeth plastic main gear for the layshaft.Diameter 69 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5

€17.90*

Average rating of 0 out of 5 stars

6077/08 FG Spacer bushing for rear upright
Genuine FG spare/option part. Only suitable with standard size ball bearings.Dimensions:Length: 10 mmOuter diameter: 11 mmInner diameter: 8 mmContents:2 pieces

€4.50*

Average rating of 0 out of 5 stars

6077/01 FG rear uprights, 2 pcs.
Bearing seats 22x7 mm

€11.00*

Average rating of 0 out of 5 stars

68277 FG Front driveshaft 4WD
Genuine FG spare/option part.Dimensions:Diameter: 7,10 mmTotal length: 107,5 mmContents:1 piece

€15.90*

Similar products

Average rating of 0 out of 5 stars

6431 FG Steel pinion 16 teeth
Genuine FG spare/option part.For combination with 48T main and differential spur gear.Diameter: 26.7 mmBore: 10 mmTotal width: 16 mmTooth width: 9.5 mmModule: m=1,5Contents:1 piece

€26.90*

Average rating of 0 out of 5 stars

6438/05 FG Tire insert for slicks 80 mm 1/6
Genuine FG spare/option part.Fits for 1/6 scale slick tires. Dimensions:Length: 380 mmWidth: 73 mmHeight: 13 mmContents:2 pieces

€14.90*

Average rating of 0 out of 5 stars

6427 FG Plastic gear wheel 46 teeth - 1pce.
46 teeth gear wheel for the layshaft.Diameter 72 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5

€17.90*

Average rating of 0 out of 5 stars

6425/01 FG Stabilizer front/rear for 1/6 scale models
Genuine FG spare/option part.Fits for all 1:6 scale models except Monster-Truck, Monster Beetle Pro and Stadium-Truck. Not suitable for all 4WD cars.Dimensions:Front: 3 mmRear: 4 mmContents:1 set

€34.50*

Average rating of 0 out of 5 stars

6429/01 FG Upright front for 1:6 2WD models
Genuine FG spare/option part.Reinforced version with steel inlay to prevent the M5 bolts from being pulled out.Bearing seats: 22 x 7 mm.Contents:2 pieces

€39.90*

Average rating of 0 out of 5 stars

6445 FG Spring tension adjustment clips
Genuine FG spare/option part. Required for preload adjustment on FG off-road shocks.For shocks with 20 mm body diameter. Content:6 rings 5 mm wide2 rings 10 mm wide

€8.90*

Average rating of 0 out of 5 stars

6451/03 FG Air filter adapter for Zenoah and CY, 1 pce.
Item N° 6451/03 Air filter adapter for Zenoah and CY, 1pce.These air filter adapters are needed fpr mounting the FG air and inlet silencers 6464, 6465 and the K+N air filters 6442 and 6460 as well as 9462 and 6466 on Solo, Zenoah and Tech engines.Fits: Zenoah G230/G240/G260/G270/G290 and CY 23/26 cm³ engines.

€16.90*

Average rating of 0 out of 5 stars

6439 FG Alloy spur gear carrier 60 mm
Genuine FG spare/option part. For 48T - 46T spur gears.Contents:1 piece

€39.50*

Average rating of 0 out of 5 stars

6441 FG Filter oil for foam filter 50ml
Genuine FG spare/option part. For use with all foam filters, not for fabric filters.Content1 piece

Content: 50 Milliliter (€190.00* / 1000 Milliliter)

€9.50*

Average rating of 0 out of 5 stars

6454/01 FG O-ring for alloy air filter adapter 19x1,5mm/55x2mm - 2pcs.

€2.60*

Average rating of 0 out of 5 stars

6429/02 FG Spacer bushing for front upright Marder - 2pcs.

€4.60*

Average rating of 0 out of 5 stars

6452/01 FG Alloy bush for air filter adapter 5,5mm/8x7mm - 2pcs.
Spare part for 6451_02 and 6451_03

€4.90*

Customers also viewed

Average rating of 0 out of 5 stars

1001M Mecatech twin piston hydraulic brake for Mecatech star mount, set
Mecatech twin piston hydraulic brakeTwin piston hydraulic brakes with Epoxi rotors and steel brake pads for optimized braking performance. The master cylinders feature a volume compensation.Fits FG Evo 04 - 08, Mecatech FW01, Competition 07 - 08, Sportsline 08 and with pedestal in every FG offroad cars (buggy / monster / stadium with original FG 700 ml fuel tank).The brake fits without any further accessories on FG Evo-models which are equipped with the a-arms no. 1100/10 respectively 1100/11When running wheel squares with Seeger ring, the ring has to be removed.On FG Evo-models which are equipped with the a-arms no. 1100/05 respectively 1100/06, the brake has to be filled before the installation. In addition the ventilation nipple of the brake must be exchanged against the venting valve no. y0309Pedestal for installation for all FG Offroad-models: Mecatech twin piston hydraulic brake

€299.90*

Average rating of 0 out of 5 stars

7431/21 FG Steel gearwheel hardened 21 teeth - 1pce.
Item N° 7431/21 Steel gearwheel hardened 21 teeth - 1pce.Suitable for 42 teeth main gear wheel.Diameter 35.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.

€28.50*

Average rating of 0 out of 5 stars

6431/01 FG Steel pinion 16 teeth, wide - 1pce.
Item N° 6431/01 Steel pinion 16 teeth, wide - 1pce.For use on the clutch bell of FG monster cars.Diameter 26.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5

€33.90*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Plugin Development