6078/06 FG ball bearing 8 x 22 x 7 sealed
€13.90
Available
Product information "6078/06 FG ball bearing 8 x 22 x 7 sealed"
Splash water proofed ball bearings for front and rear uprights.
Wheel bearing suitable for all FG and Carson models.
Contents:
- 2 pieces
Lebacher Strasse 4
66113 Saarbrücken
Germany
Login
Alternatives
Contains all bearings for the specified FG-car.Complete ball bearing set for all FG touring and offroad 2WD cars (your choice of plastic or alloy diff case). Not suitable for WB535 Modelle.The set includes:wheel bearing, 8 pcs., 8x22x7 mmclutch bell bearing, 2 pcs., 10x22x6 mmlayshaft bearing, 2 pcs., 10x19x7 mmdiff bearing, 2 pcs., 12x28x8 mm for plastic diff case.1 Set, 14 pieces
Contains all bearings for the specified FG-car.Complete ball bearing set for all FG touring and offroad 2WD cars (your choice of plastic or alloy diff case). Not suitable for WB535 Modelle.The set includes:wheel bearing, 8 pcs., 8x22x7 mmclutch bell bearing, 2 pcs., 10x22x6 mmlayshaft bearing, 2 pcs., 10x19x7 mmdiff bearing, 2 pcs., 15x28x7 mm for alu diff case.1 Set, 14 pieces
Customers also bought
Genuine FG spare/option part. Also available in titanium 4510 and hardened steel 6073/05.Dimensions:Diameter: 6 mmLength: 63 mmContents:2 pieces
Genuine FG spare/option part. Suitable for all FG 2WD Off-Road models. Not suitable for Monster-Truck models.Bearing seats 22x7 mm.Contents:1 set
Genuine FG spare/option part.Contents:1 piece
Item N° 6545 FG gold contact plug-in system 2mm - 2pcs.Reverse battery protected gold contact plug-in system. A further great advantage of our plug-in system is the fixing of a plug on the receiver box or rc-plate with screws. This makes the connection of plug and bush easier.
Genuine FG spare/option part. Recommended accessory for installation of tuned pipes using teflon tube connectors. Contrary to standard hose clamps this version is self-readjusting down until 20 mm inner diameter!Width 12 mm.Content:2 pieces
Customers also viewed
Genuine FG spare/option part. Contents:2 pieces
Item N° y0689/02 FG manuals set Formular 1 Competition 09 German/English, 1 pce.Genuine FG manuals as included with the cars. English or german to choise
Alternative: Walbro 603B also with choke. But with better manufacturing quality!The Walbro WT668B carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23cc up to over 30cc. The Walbro WT668B features an integrated choke with lever and a throttle shaft linkage lever.The WT668B is also available with ball-raced throttle shaft under part number # y0036/04 Ballraced tuning Walbro WT668B carburetory0036/04 Ballraced tuning Walbro WT668B carburetorWith dual ball bearings on the throttle shaft. Two sealed bearings 2RS type (3/16" x 5/16" x 1/8") shielded by two steel plates (5 x 8 x 0.3 mm). High quality processed and optimized for racing use! The soft stock screw holding the throttle lever has been replaced with a high strength Allen key screw. Since all screws on the carb are imperial sized, so is the key for this screw. A corresponding bit is included in our tool set y0785, or you can use Allen key wrench y0037/03 as well.The Walbro WT668B carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23cc up to over 30cc. The modified Walbro WT668B features an integrated choke with lever and a throttle shaft linkage lever.The Walbro WT668B carburetor is also available in a standard version under part number # y1067 Walbro WT668B carburetor.
The FG Touring and Sports cars at scale 1:5 are known for their high quality and very detailed bodyshells true to original. Also the technically fully developed chassis are worth mentioning. These models are now available with a high-torque brushless engine. Surface conditions with maximum grip assumed speeds above 100 km/h can be reached and steered controlled.The E stands for electric power and means extremely high torque, high top speed and all without motor noise. The Sportsline models are equipped with a powerful brushless motor and a brushless speed controller. The controller can be easily adjusted via the transmitter or optionally via a programming card or, depending on the equipment, via a mobile phone app.The unpainted version does not include a decal sheet! T2M standard equipment brushless motor and ESC: - ESC 150A controller 6S - Brushless motor 6SYou can order a motor/ESC combination with 8S for an additional charge.- ESC 200A, 3-8S LiPo, BEC 8A - Brushless Motor 8SYou can select the car with complete RTR-equipment from the options menu. RTR equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. All E-Power versions need for the final assembling LiPo batteries and the suitable charger. For an unproblematic mounting we recommend to use LiPo batteries with a max. length 150mm and a width of 50mm. The model is delivered with an EC8 connector system.
