6156 FG Team ecals Marder/Zenoah - 1pce.
€33.90
Available
Product information "6156 FG Team ecals Marder/Zenoah - 1pce."
Sheet dimensions:
430 x 310 mm
0 of 0 reviews
Average rating of 0 out of 5 stars
Login
Customers also bought
Genuine FG spare/option part. The FG Marder body shell is delivered white and without window gitter or decal set.Dimensions:Length: 580 mmWidth: 240 mmHeight: 205 mmContents:1 piece
Genuine FG spare/option part. Dimensions:Length: 33 mmWire diameter 1.5 mmContents:10 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:15 pieces
Item N° 6465 FG air filter for 1:6 Off-Road models complete - setYou will need the adapter plate 6451/03 for installation.
Customers also viewed
Genuine FG spare/option part. The FG Marder body shell is delivered white and without window gitter or decal set.Dimensions:Length: 580 mmWidth: 240 mmHeight: 205 mmContents:1 piece
Genuine FG spare/option part. Contents:1 piecePainting tips:
Genuine Mecatech spare/option part. Very tough car bag with hardcase shape. All side panels are reinforced with a solid plastic tub.Dimensions:Length: 93 cmHeight: 30 cmWidth: 45 cmContents:1 piece
Original Samba article. Mint Sambaja tuning pipe from the specialist Samba, used only once. Suitable for HPI Baja 5B/SS and the identical Carson Wild GP Attack. The Sambaja system offers considerably better performance, i.e. the power is optimally available over the entire engine speed range! For engines from 23-29cc. See photos for scope of delivery. 1 piece
Genuine FG spare/option part. Body shell is delivered clear and without window gitter or decal set.Dimensions:Length: 580 mmWidth: 240 mmHeight: 205 mmContents:1 piece
Hazard and Precautionary StatementsHazard Statements (H-Code)H222Extremely flammable aerosol.H229Pressurized container: may burst if heated.H319Causes serious eye irritation.H336May cause drowsiness or dizziness.Precautionary Statements (P-Code)P210Keep away from heat, hot surface, sparks, open flames and other ignition sources. No smoking.P251Do not pierce or burn, even after use.P305P351P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P337P313IF eye irritation persists: Get medical advice/attention.P403P233Store in a well-ventilated place. Keep container tightly closed.P410P412Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.Supplemental hazard information.EUH066Repeated exposure may cause skin dryness or cracking.Farbe:Lexan SprayInhalt:150mlProduct information "RC - Paint Lexan special colors, spraycan (Offer) Buy 3 get 4"For every 3 cans purchased you will get 1 can for free.For example: if you select 4 cans our shop will charge them all when putting in the basket, but deduct one can during the check-out procedure later.RC - Paint is a special paint for lacquering RC-Car Lexan (Polycarbonate) body shells. The ultra-fine mist provides optimal coverage!Through an optimized atomizer valve an outstanding painting result is guaranteed.RC-Paint Lexan color is produced in a particularly environmentally friendly.The composition of colors (color pigments) was placed on the lowest possible heavy metal content and the best possible environmental compatibility of the solvent and propellent gas value.Contents:1 piece / 150 mlThe content of the can is 150ml and suffices - depending on the intensity of the painting, - for one 1/8 or two 1/10 body shells. Two to three cans are needed for a 1/5 or 1/6 body shell.
The first 1/5 touring and sports car designed as a 4WD from the ground up. With a wheelbase of 510mm the 4WD chassis is suitable for the FG Mini Cooper and the FG Porsche GT3 RSR bodies. Equipped with a strong 26 cm³ engine, tuning pipe, tank with quick acting closure, 2 differential gears, front disk brake and a lot more. However, the highlight is still the well-known FG 4WD. Maximum traction, easy handling and grip during cornering as well, these are the advantages only a 4WD model can offer.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The RTR version of the car includes servos, transmitter, receiver, rechargeable batteries for transmitter / receiver.The 4WD Sportsline chassis opens up a new era within the Touring and Sportscar class of large scale model cars. Main target was the development of a chassis with supreme driving dynamics and ultimate performance. Maximum traction as well as easy handling, sufficient grip in curves, only a fourwheel powered model offers all these advantages. With the new 4WD Sportsline series FG Modellsport once again sets a trend at 1:5 scale.The 4WD Sportsline chassis for the Porsche 911 GT3 RSR is delivered with a wheelbase of 510mm. The fourwheel drive is carried out over an almost wear resistant tooth belt. 2 differential gears, tank with snap closure and a powerful engine with Tuning pipe turn the Sportsline 4WD chassis into a high-class 1:5 scale model with outstanding driving characteristics.You can choose this 4WD model with painted bodyshell , 2.4 GHz radio control system, servos, batteries in our configurator. Team decals are not included in the delivery content and have to be ordered separately.The engine runs with a 2-stroke petrol-oil mixture. Through the installed pull-start system the engine can be started without any problems. A tank filling enables you to run your model around 45 minutes. Equipment and technical description:Solid 4mm chassis made of high-quality aluminium low-wear belt drive splash-proved 2 differential gears double wishbones at front and rear axle toe-in, castor and wheel camber adjustable at the axles - rear FG ball drive all steel driving components hardened all rotating parts ball-beared servo relieving servo saver front disk brake rear gear brake with big brake disk 700ccm fuel tank with snap closure oil-pressure shock absorbers with volume control and spring adjusting ring 26 cm³ combustion engine with Tuning pipe fabric hollow chamber tires with inserts receiver box and battery holder polycarbonate bodyshell 2.4 GHz pistol grip radio control system with steering and gas servo.Dimensions: Length: 980 mm Width: 405 mm Height: 250 mm Wheelbase: 510 mm HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURDriveshaft bootsProtect ball drive as well as cardan drive against dirt. 4 pairs / 8 piecesValue: 42,90 EURAlloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EURTotal value: 200,30 EURTouring cars in action!Painting tips: