68270, FG Front uprights 4WD, plastic, 1 pair

€34.90*

Prices incl. VAT plus shipping costs

Available

Product number: fg_68270

EAN: 3410564534212

Product information "68270, FG Front uprights 4WD, plastic, 1 pair"

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

y68413 Front alloy uprights 4WD

Genuine HT spare/option part.The set includes uprights, steering arm, alloy stoppers, screws.Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/ Stadium models 4WD RTR and Mini and Leopard 2 und 4WD.Contents:1 set

€219.90*

Accessories / Spare parts

y68413 Front alloy uprights 4WD

€219.90*

Similar products

68325/01, FG Servo saver spring blue

Springs with different hardnesses for servo saver item-no. FG 68420.Red = soft, for budget-priced RTR servos with plastic gear.Blue = medium, for high-quality competition servos.Content:1 piece

€6.90*

68253 FG Idler pulley 16mm, plastic

Genuine FG spare/option part. Contents:1 piece

€4.90*

68277 FG Front driveshaft 4WD

Genuine FG spare/option part.Dimensions:Diameter: 7,10 mmTotal length: 107,5 mmContents:1 piece

€15.90*

68216 FG Layshaft 4WD

Genuine FG spare/option part.Dimensions:Diameter: 10 mmLength: 94 mmContents:1 piece

€13.90*

68250/01 FG Plastic front axle housing left, 1:6, 1 pce.

Item N° 68250/01 Plastic front axle housing left,1:6, 1 pce.This closed front axle housing reduces the entry of dirt in the belt drive. Suitable for all 4WD Off-Road and Monster models as well as for the 2WD Off-Road and Monster models WB535.

€21.90*

68251/01 FG Front axle housing, r/h 4WD 1:6, plastic

Genuine FG spare/option part.Contents:1 piece

€21.90*

68268, FG A-arm hinge pin, front lower 2WD/4WD

Genuine FG spare/option part.Dimensions: 106mm x 6mmContents:2 piecesFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€17.90*

68240, FG Radio plate 4WD, plastic

Genuine FG spare/option part.Contents:1 piece

€13.80*

68328 FG Disk for tension sleeve

Genuine FG spare/option part.Fits Sportsline Leopard 4WD.Contents:1 piece

€3.50*

68252, FG Gilmer belt pulley 12 teeth 4WD, plastic

Genuine FG spare/option part. Contents:1 piece

€5.50*

68323/03 FG Servo-Saver A/B, 80°

Genuine FG spare/option part. Improved servo saver parts A + B with changes in detail. A change of the slope angle improves the protective function. Depending on the steering servo and the desired hardness of the servo saver red and blue FG servo saver springs are recommended. Fits the 2010 model servo saver.Contents:2 pieces

€10.90*

68276 FG Front wheel shaft 2WD/4WD

Genuine FG spare/option part. Diameter 8 mm.Contents:1 pieceFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€18.90*

Customers also viewed

y1419 Sintered steel clutch for Zenoah and many other engines from 23 cm³ to 32 cm³

Sintered steel clutch for Zenoah and many other rc-car engines from 23 cm³ to 32 cm³.Note: The sintered steel clutch needs a break in period of at least half an hour run time after their first installation. Only then the clutch surface reaches the desired grip and provides the necessary friction. After that the clutch will show consistent operation and extremely low wear!With 80 grams the weight of the clutch is about the same as the usual OEM clutches.As with all non-adjustable clutches a periodic monitoring of the clutch spring is recommended. By changing the spring, it is also possible to match your car to the track conditions, i.e.: the harder the spring, the higher the stall speed of the clutch.If not on hand, for installation of the sintered steel clutch a clutch spring, the Zenoah screw set # 7318 and the original Zenoah clutch mount # 7315 are required!

€19.00*

y68413 Front alloy uprights 4WD

€219.90*

6000CZ30 FG Marder 2WD Legend 30 Years - limited and numbered special edition

To celebrate the 30th anniversary of the legendary Marder 1/6 scale 2WD buggy, FG Modellsport/T2M releases a special edition, limited to 300 numbered pieces, with the original signature of Franz Gröschl on the sticker sheet as well as a top equipment (G260RC Zenoah engine, hi-capacity low friction aluminum shock absorbers and special aluminum engine mounts). with original 260 Zenoah with Low-Friction Alu shocks with alloy enginemount The Models is built on a 4 mm u-bended chassis. All borings of the lower side are countersunk, therefore the screw heads can't bear out.Double wishbones at font and rear axle as well as 4 bulk oil-pressure shock absorbers guarantee perfect ground adherence. All rotating parts are supported by ball-bearings. Rear gear wheels, differential gears and all driving elements are case-hardened. The side guards protect the model from dirt. With original signature of Franz Gröschl. The model is equipped with a powerfull 26 ccm engine which runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 liters enables you to drive about 45 minutes. The engine can be started without difficulties through the integrated pull-start. To complete the models all merchantable servos and radio control systems are suitable.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery

€799.99*

Configure now

8453/01 FG Front upright for 1:5 with steel ring

Genuine FG spare/option part. Suitable for all mechanical disk brakes.Steel insert provides a strong thread for the mounting bolts.Contents:2 pieces

€29.90*

y0963 FG manuals set Marder Race 2WD, set

Genuine FG manual as included with the car.

€3.90*

6103/06 FG Alloy upright front 1:6 2WD

Genuine FG spare/option part. Suitable for all FG 2WD 1:6 Off-Road and monster models.Bearing seats: 22 x 7 mm.Contents:1 set

€124.95*

68515 FG Tuning Conversion Kit for front and rear axle, Marder

Genuine FG spare/option part. Individual prices of the parts in the tuning set: 847,06 EurosAluminum conversion kit to aluminum front axle and aluminum rear knuckle and wishbone for FG Marder.Contents:1 set

€424.95*