4466 FG Rose joint for alloy wishbone

€51.90*

Prices incl. VAT plus shipping costs

Available

Product number: fg_4466

EAN: 3410564503126

Product information "4466 FG Rose joint for alloy wishbone"

Suitable for , , , , , , , , , , and Elcon Monster-Truck front axle.

A = 5 mm
B = 6 mm
C = 8 mm
D = 13 mm

Content:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

4429/02 FG Steel taper disk 5mm bore

Genuine FG spare/option part.Steel taper disks, 3.5 mm thick, with a higher stiffness compared to alloy taper disks. Installation of these disks allows for larger operation angles of the metal ball joints and rose joints. You need two disks per joint.Contents:4 pieces

€10.95*

Alternatives

y1036 HT rose joints with conical spacers

Genuine HT spare/option part. Dimensions:A = 5 mmB = 6 mmC = 8 mmD = 13 mmContents:2 pieces rose joints4 pieces conical spacers

€18.90*

4466/05 FG Ball-and-socket joint

Genuine FG spare/option part. Alternative: y1036Contents:2 pieces

€23.80*

Customers also bought

7201/05 FG Guiding set

Suitable for shocks with the FG order number: 7200, 7201, 7202, 7203, 7204.Dimensions (with flange):Inner diameter 4 mmOuter diameter 6 mmFlange diameter 8 mmWidth 2,5 mmDimensions (without flange):Outer diameter 7,7 mmWidth 1,6 mmContents:8 bushings with flange2 bushings without flange

€6.90*

6496/04 FG Guide bushing - 8pcs.

6 mm bore

€9.50*

1097/01 FG Flanged bushing

Genuine FG spare/option part.Dimensions:6 x 8 x 7,5 mmContents:6 pieces

€5.30*

7100 FG Adjusting clip for 16 mm axle, 16 pcs.

These adjusting clips allow a faster adjustment of the wishbones. Suitable for front and rear suspension. The set contains 16 adjusting clips in 2 and 6mm size for 6 mm axles.

€9.50*

6040 FG Ceramic ball bearings 10x22x6 mm

Genuine FG spare/option part. Why ceramic? Besides corrosion and wear resistance ceramic balls are smoother and have a better shape stability; resulting in less drag from the bearing itself.Are used in all FG and Carson models for bearing the clutch bell.Contents:2 pieces

€23.90*

6029/08 FG Ball-and-socket joint for M8

Genuine FG spare/option part. Reinforced plastic ball-and-socket joints for M8 thread rods. Replacement for the plastic ball-and-socket joints 6029/01.Fits 10 mm balls, total length 39 mm.Contents:4 pieces

€12.90*

Customers also viewed

y1036 HT rose joints with conical spacers

Genuine HT spare/option part. Dimensions:A = 5 mmB = 6 mmC = 8 mmD = 13 mmContents:2 pieces rose joints4 pieces conical spacers

€18.90*

8499/01 FG Needle bearing 12x10x8 for differential

Genuine FG spare/option part. Spare part for 8498/01.Content:2 pieces

€15.75*

15453 HPI Engine stop switch

Genuine HPI spare/option part. Content:1 piece

€9.89*

Details

y0557 Zenoah G230RC with Walbro carburetor WT 603B

23 cc Zenoah engine for large scale cars!The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge.Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€264.90*

6917/16 FG Pan-head flange screw with Torx M6 x 16 mm, 5 pieces

Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:5 pieces

€4.30*

4516 FG Titanium steering rod left/right 6x65 mm

Genuine FG spare/option part. Corrosion resistant and 40 % less weight compared to steel.Fits all 1/5 models and race trucks.Content:2 pieces

€39.90*

Replacement bushings 5x6x6 mm, y1182, 8 pcs.

For upper HT alloy a-arms Gas Devil.Inner diameter 5 mmOuter diameter 6 mmWidth 6 mmSet of eight

€6.10*