306067 Steel pinion 14T to 48T for layshaft

32451 Gear 2 - 1pce.

Layshaft pinion 16T for Carson / Smartech 2WD cars.Module: m=1,5

€29.90*

y0190/46 HT-Alloy carrier with steel spur gear 46T for the layshaft

This carriers makes it possible to run steel spur gears on the layshaft. Pebbles heat and the high torque of monster truck applications are no longer a problem.The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of the pinion and the spur gear carrier are pointing to the outside of the car. The carrier features M8 (eight, no typo) grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution.

€89.90*

32452 Gear 1 - 1pce.

cs_32452 Quality: Stock

Differential spur gear 48T for Carson / Smartech 2WD cars.Module: m=1,5

€44.90*

y0048 HT Alloy Ring Gear Adaptor 47/52/60 mm outside diameter

zahn_0011 Version: y0048/02 - 52 mm Ø medium (39 T - 44 T)+ 5.5EUR

Alloy ring gear adaptor for FG, Smartech, Carson and many other cars. Contrary to the stock plastic adaptor the aluminum version is secured by set screws.There are three sizes available:y0048/01 - 47 mm outer diameter, fits 38 tooth ring gearsy0048/02 - 52 mm outer diameter, fits 39/40/41/42/43/44 tooth ring gears - Weight: 29 grammsy0048/03 - 60 mm outer diameter, fits 46T and 48T ring gears - Weight: 31 gramms

Variants from €39.90*

€45.40*

y0190 HT-Alloy carrier for steel spur gears on the layshaft

y0190 Content of delivery: Carrier with 46 teeth steel spur gear, y0190/46+ 39.9EUR

This carriers makes it possible to run steel spur gears on the layshaft. Pebbles heat and the high torque of monster truck applications are no longer a problem.The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of the pinion and the spur gear carrier are pointing to the outside of the car. The carrier features M8 (eight, no typo) grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution.Please note: the wide FG 48T spur gear 6048/2 does not fit this adapter, but it wouldn't be recommended for this application anyway; it's way too heavy.Content:1 piece

Variants from €39.90*

€79.80*

y0190/48 HT-Alloy carrier with steel spur gear 48T for the layshaft

This carriers makes it possible to run steel spur gears on the layshaft. Pebbles heat and the high torque of monster truck applications are no longer a problem.The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of the pinion and the spur gear carrier are pointing to the outside of the car. The carrier features M8 (eight, no typo) grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution.

€89.90*

y0204 HT-Steel pinion extreme duty

zahn_0002 Size: y0204 - 12 Teeth

Genuine HT spare/option part.Coarse pitch pinion for the layshaft, especially for use in off-road and monster models. The teeth are stronger and , due to their bigger size, a little bit more forgiving when the gear mesh is not adjusted correctly.Fits FG cars and Carson Attack/Firehammer/Smartech Traveller, Carson Comanche, Touareg a.s.o.Fits FG and Smartech / Carson cars. Only for use with the extreme duty differential ring gear! Module: m=1,75.Contents:1 piece [INCLUDE]profilverschoben[ENDINCLUDE]

€28.90*

HT-Steel pinions for Carson / Smartech 2WD offroad cars

Genuine rc-car-online spare/option part. The pinions are made from nitrited steel. The do all correspond with the standard main gear and are secured using two grubscrews.These pinions are profile regraded and have all the same diameter!Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Contents:1 piece

€29.90*

HT-Alloy pinion for Attack onroad use y0096, 1 pce.

Hard-coated 25T alloy pinion for use in combination with a . This pinion allows for use of the car on tarmac running touring car tires.Module: m=1,5

€27.90*

y0202 HT-Differential ring gear, extreme duty, 41Teeth

Genuine HT spare/option part.Coarse pitch spur gear for the differential, especially for use in off-road and monster models. The teeth are stronger and , due to their bigger size, a little bit more forgiving when the gear mesh is not adjusted correctly.Fits FG cars and Smartech / Carson 2WD cars.Only for use with the extreme duty pinions! Not for use in combination with Elcon rear drivetrain unit or Elcon differential!Module: m=1,75.Contents:1 piece [INCLUDE]profilverschoben[ENDINCLUDE]

€49.90*

306067 Steel pinion 14T to 48T for layshaft

Product information "306067 Steel pinion 14T to 48T for layshaft"

Login