Skip to main content Skip to search Skip to main navigation
+49 2151 820200
Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm
Fast shipping until 2 p.m.

2012-13 Mecatech Carbon Fiber front Body Support

Product information "2012-13 Mecatech Carbon Fiber front Body Support"

Genuine Mecatech spare/option part for the FW01.

Content:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Skip product gallery

Customers also bought

2012-07 Mecatech Plastic Bumper
2012-07 Mecatech Plastic Bumper

Genuine Mecatech spare/option part for the FW01.Content:1 piece

Regular price: €18.50
2012-108 Mecatech Zahnrad Z64
2012-108 Mecatech Zahnrad Z64

Genuine Mecatech spare/option part for the FW01.Content:1 piece

Regular price: €61.00
2012-16 Mecatech Carbon Spacer front Pillar
2012-16 Mecatech Carbon Spacer front Pillar

Genuine Mecatech spare/option part for the FW01.Content:1 piece

Regular price: €26.00
7111 Samba 7 Connecting set
7111 Samba 7 Connecting set

Genuine Samba spare/option part.Connecting springs for Samba 7 pipes.Dimensions:Length: approx 18 mmWire thickness: 0,8 mmContents:8x Connection springs2x Silicone damperring2x Viton O-Ring 20 x 1,5 mm

Regular price: €12.90
2012-14 Mecatech Front body Mounting
2012-14 Mecatech Front body Mounting

Genuine Mecatech spare/option part for the FW01.Content:1 piece

Regular price: €9.20
2012-86 Mecatech Side Body Mount long
2012-86 Mecatech Side Body Mount long

Genuine Mecatech spare/option part for the FW01.Content:1 piece

Regular price: €7.70
Skip product gallery

Customers also viewed

2012-212 Mecatech Grooves chassis FW01
2012-212 Mecatech Grooves chassis FW01

Genuine Mecatech spare/option part for the FW01.Content:1 piece

Regular price: €290.50
8303 ESW wSamba 8 Titan Racing - tuned pipe system DMC 10-1504 for short wheelbase 510mm
8303 ESW wSamba 8 Titan Racing - tuned pipe system DMC 10-1504 for short wheelbase 510mm

The Samba 8 titanium gives you a weight saving of 140 grams compared to the steel version. We have tested and optimized the Samba 8 Titan- tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springs, making a failure prone o-ring seal obsolete! Despite of the increased performance fuel consumption remains the same compared to a Samba 7 pipe. The Samba 8 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! In the short version 8303 ESW, the installation of the tuned pipe is possible in vehicles with 510mm wheelbase. Again and again, podium places are achieved at major events through the use of Samba tuned pipe systems.Of course, the Samba 8 tuned pipe system is race legal for racing, with the DMC approval number 10-1504 engraved. The Samba 8 - tuned pipe system comes with an installation kit.Fits: All On-road cars from FGContrastBergonzoniHarmGeniusand many others as wellOriginal statement from Samba: "This new tuned pipe system is the result of the development of the Samba 7 tuned pipe!"

Regular price: €399.00
HT-Airbox Evo, y19028 - 1pce.
HT-Airbox Evo, y19028 - 1pce.

HT-airboxes, very small, low height design and low weight; but with a large (45 mm diameter) filter element. The boxes will fit on a FG car under a Porsche GT3 body and weighs even less than a FG Formula 1 airbox. The filter mounts directly above the carburetor and remains there, even when the box itself has been removed.The Evo-airbox has a higher flow rate, which is important for the high revving engines in onroad cars. Its diameter (100 mm) will usually allow an installation only in a few buggies with a vertically mounted engine, like Gas Devil / Titan / Helldevil.All parts available separately.

Regular price: €51.20
2012-152 Mecatech Carbon Support for Battery
2012-152 Mecatech Carbon Support for Battery

Genuine Mecatech spare/option part for the FW01.Content:1 piece

Regular price: €21.75
y0557 Zenoah G230RC with Walbro carburetor WT 603B
y0557 Zenoah G230RC with Walbro carburetor WT 603B

23 cc Zenoah engine for large scale cars!The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge.Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

Regular price: €264.90
2012-113 Mecatech Pillar Rear Axle LH
2012-113 Mecatech Pillar Rear Axle LH

Genuine Mecatech spare/option part for the FW01.Content:1 piece

Regular price: €76.50
2020-18 Mecatech Adjustable 3 Shoe Clutch
2020-18 Mecatech Adjustable 3 Shoe Clutch

Genuine Mecatech spare/option part. This completely new developed adjustable clutch fits by default in combination with the Mecatech and Genius clutch bells. But combined with a special washer it can also be used on other brands.The shoes in this clutch are mounted in the direction of rotation (reverse), similar to other actual clutch designs.It is of course possible adjust this clutch to engage at different rpm's. The clever design of this clutch makes it very easy to disassemble and adjust the clutch. This requires only 2 separate tools.The first tests in Italy have shown that even after 2 hours of continuous driving, the clutch acts more smooth and precise compared to others. Furthermore the engagement remains very stable and the wear was negligibleContents:1 piece

Regular price: €145.00
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Theme Development