1096/01 FG Ball guide 5mm Evo 04-14+Evo 2020

€13.50*

Prices incl. VAT plus shipping costs

Available

Product number: fg_1096_01

EAN: 3410564500514

Product information "1096/01 FG Ball guide 5mm Evo 04-14+Evo 2020"

Genuine FG spare/option part.

Only suitable for Evo 04 - 14 and Evo 2020, 5mm front ball stabilizer.

Dimensions:

Ball diameter: 11,5 mm
Total length: 104 mm

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Accessories / Spare parts

y19120 Drive shaft boots

Reduce the wastage at the drive shafts. Price per pair.

€6.90*

y0809 Klüber high performance grease for differentials

Freaking expensive, but it is damned fine.ASONIC HQ 72-102 is a synthetic high-temperature lubricating grease, for use in limited slip differentials. Due to the careful selection of product components and the clean manufacturing environment, ASONIC HQ 72-102 is a rolling bearing grease with a particularly low noise level.Benefits for your application:High-temperature lubricating grease for rolling bearingsHigh purityLow noiseGood water resistanceContent:1 piece, tube with 30g

Content: 30 Gramm (€730.00* / 1000 Gramm)

€21.90*

y1433 Protect bellow for ball stabilizer

Genuine HT spare/option part. Protects stabilizer ball and stabilizer socket against dirt and prevents a clamping as well as a stiffness of the ball stabilizer. Suitable for the ball stabilizer of front and rear axle of Competition 07, Evo 04, Evo 07, Evo 08 and for Evo 2020..Dimensions:Inner diameters: 5 mm/15 mmLength: 52 mmContent:2 piece

€14.90*

Alternatives

y1433 Protect bellow for ball stabilizer

€14.90*

Customers also bought

1096/02 FG Ball socket 5mm Evo 04-14+Evo 2020

Genuine FG spare/option part. Only suitable for Evo 04 - 14 and Evo 2020, 5mm front ball stabilizer.Bore accepts 11.5 mm ballTotal length 104 mm

€14.90*

y804 HT-flange sealer 518, 50 ml up to 200°C

Especially for installation of all engine gaskets. Temperature resistant from -55 °C to +200 °C. Resistant to water, mineral oils, synthetic lubricants, fuels, organic solvents and refrigerants. info: Hand tight: 10 - 20 minReady to use: 1 - 3 hoursGap fill: 0.5 mmContent: 50 ml Notes for usage: This surface seal is not for use as the sole sealant, it should always be applied in combination with a paper gasket.The HT-surface sealing agent should be sparsely applied over the entire surface, with care being taken that the sealant does not enter the devices internals (e.g. crankcase, differential a.s.o.) during the assembly.

Content: 50 Milliliter (€538.00* / 1000 Milliliter)

€26.90*

94529 HPI Flat head screw M4 x 10 mm

Genuine HPI spare/option part. Dimensions: M4 x 10 mm, 2,5 mm with allen head.Part is delivered in silver or black color from vendor!Contents:10 pieces

€2.30*

Details

7154 FG Body mount adjustable, 1 pce.

Adjustable body mount with heigt-adjustable body support.Measures:Length 110 mmDiameter 8 mm10 mm at the baseFor all cars and body shells.

€9.95*

6558 FG Y-cable Futaba

The Y-cable is required to drive two servos from a single receiver channel.Content:1 piece

€11.10*

2012/500 Linkage set dedicated to Mecatech FW01, complete

Complete set for steering, throttle and brake linkagesSet includes:3 x 6534/02 Throttle pivot post for 2 mm linkages 1 x y0132 y0132 Linkage rod for MecaTech brakes1 x 1213/10 Steel ball 7 x 6,5 mm1 x 66244, Ball joint 7mm M41 x 1213/11 Steering linkage l./r., M4 x 42mm1 x 6020 Set collar 2,1mm1 x 1018/01 Throttle linkage Evo 09 / Comp. 077 x Nut M32 x Screw M3 x 16 mm3 x Screw M3 x 18 mm 2012/501 Throttle linkage 2012/502 Brake linkage set 2012/503 Steering servo linkage set 2012/504 Throttle/brake servo horn The Servo arm is suitable for all servos with an output shaft with 25T spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!

€79.90*

Similar products

1152/01 FG Extend. rear mount Renault Megane - 1pce.

Genuine FG spare/option part. Rear body mounts, bolt to rear shock stay. Only for Renault Megane body shell.

€9.90*

1213/11 FG Steering linkage l./r., M4 x 42 mm

Genuine FG spare/option part. Contents:2 pieces

€20.80*

1106 FG Alloy front riser blocks truck Evo 08-14

Genuine FG spare/option part. for Evo 08-14 with the newer front axle.Is needed to compensate for the larger diameter of the truck wheels.Dimensions:Length: 86 mmheight: 8 mmwidth: 8 mmContents:2 pieces

€19.95*

1097/01 FG Flanged bushing

Genuine FG spare/option part.Dimensions:6 x 8 x 7,5 mmContents:6 pieces

€5.30*

1183/02, FG Spacer bushing 4 x 8 x 8 mm for Evo 08-14

Genuine FG spare/option part. Suitable for Evo 08-14 Is needed to compensate for the larger diameter of the truck wheels.Contents:3 pieces

€4.70*

1100/10 FG Front lower alum. wishbone left for Evo 12-14

Genuine FG spare/option part. Through mounting the front lower alum. wishbones it is possible to fix the shock absorbers even flatter. The alum. shock absorber in the front is not needed anymore. The stabilizer was embedded lower in the wishbone in otder to gain more space for the damper springs. For the flattest damper position you need the longer damper fastening FG 7087/02. Suitable for FG EVO08-EVO12.Contents:1 piece.

€82.50*

2006/13 FG RC linkage Collari - Set

Suitable for Collari hydraulic brake.

€15.50*

2006/05 FG Piston rod - 1pce.

Suitable for Collari master cylinder ().Length 28 mmBore diameter 2.6 mmShaft diameter 3 mm

€22.35*

2006 FG Master cylinder - 1pce.

Suitable for Collari front and rear hydraulic brake (and ).

€93.80*

1096/05 FG Spherical nut Evo 04

Genuine FG spare/option part. Only suitable for Evo 04 front and rear ball stabilizer. Old Version.Contents:4 pieces

€7.70*

2005/07 Piston Snap ring for Collari brake

Genuine FG spare/option part. Suitable for Collari front and rear hydraulic brake (2004 and 2005)Dimensions:Wire diameter: 0.8 mmOuter diameter: 14.2 mmContents:2 pieces

€4.70*

2005/04 Piston for Collari hydraulic brake

Genuine FG spare/option part. Suitable for Collari front and rear hydraulic brake (2004 and 2005).Dimensions:Diameter: 12.2 mmLength: 11 mmContents:1 piece

€19.30*