10639 FG Gear drive for F1 Competition, set

€524.95*

Delivery time approx. 2 days

Product number: fg_10639

EAN: 3410564527603

Product information "10639 FG Gear drive for F1 Competition, set"

During the past years engines and tires became stronger and so the belt drive's power transfer capabilities where no longer up to the task. Therefore we developed the gear drive which has what it takes to reliably keep up with even the strongest engines for years to come.
A further advantage is the smoothness of the gear drive compared to the belt, which reduces overall drag significantly.
The set includes all necessary parts to convert the FG Formula 1 Competition to gear drive.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

4405/01 FG Ball bearing 8 x 16 x 5 mm

Genuine FG spare/option part. Replacement ball bearing for 4405.Contents:2 pieces

€13.10*

6036/05 FG bearing set 10x19x7 with grease filling - 2 pcs

Item N° 6036/5 FG bearing set 10x19x7 with grease filling - 2 pcs

€15.90*

This product is no longer available.

6038 FG Engine mount washers for M4 and M4 screws

Genuine FG spare/option part. Washers for the screws (M4 / M5) that hold the engine mounts to the chassis. Suitable for all FG models.Dimensions:Outside diameter: 15 mmInside diameter: 6 mmContents:4 pieces

€6.50*

6047 FG Steel pinion small 15 teeth

Genuine FG spare/option part. True running steel pinion for minimized wear. Suitable for all FG cars.Dimensions:Diameter: 26,7 mmBore: 10 mmTotal width: 16 mmTooth width: 9.5 mmModule: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.Contents:1 piece

€31.90*

6048 FG Steel gearwheel big 48 teeth

Genuine FG spare/option part. Differential spur gear for all FG street cars except Formula 1. Can also be used as a main spur gear on the layshaft on monster models when mounted on alloy gear carrier y0190.Dimensions:Outer diameter: 75 mmWidth: 7.5 mmBore: 45 mmModule: m=1,5Contents:1 piece

€52.90*

7052 FG Plastic gear wheel 42 teeth - 1pce.

Gearwheel with 42 teeth for the layshaft. Diameter 66 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5

€15.75*

7431 FG Steel gearwheel hardened 22 teeth - 1pce.

Item N° 7431 Steel gearwheel hardened 22 teeth - 1pce.Suitable for 42 teeth main gear wheel.Diameter 35,7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5

€28.50*

7439/05 FG Alloy gear carrier 52mm special, 1 pce.

Item N° 7439/05 Alloy gear carrier 52mm special, 1 pce.Precision alloy gear carrier, exact support of the plastic gearwheels 39, 40, 41, 42 and 44 teeth. Very low height design. For 10 mm diameter shafts.Please note: competition layshaft 6041/05 is necessary for installation!

€39.50*

10456/01 FG Engine flange for quick fix system F1

Genuine FG spare/option part. Spare part for 10456.Contents:1 piece

€49.50*

10640 FG Alloy rear bulkhead l/h F1 Comp. - 1 pce

Spare part for F1 gear drive

€106.50*

10651 FG Spacer bushing 13 x 10 x 35 mm

Genuine FG spare/option part. Dimensions:13 x 10 x 35 mmContents:1 piece

€3.00*

10642 FG Alloy differential bearing carrier, l/h - 1 pce

Spare part for F1 gear drive

€39.90*

10643 FG Alloy differential bearing carrier, r/h - 1 pce

Spare part for F1 gear drive

€39.90*

10645 FG Alloy rear brace

Genuine FG spare/option part. For cars with gear drive FG no.: 10639. Contents:1 piece

€3.60*

10650 FG Alloy layshaft bearing mount - 1 pce

Spare part for F1 gear drive

€25.90*

10652 FG Layshaft for Gear drive - 1 pcs

Diameter 10 mmLength 84.4 mm

€50.50*

10653 FG Alloy gear flange-engine F1

Genuine FG spare/option part. Contents:1 piece

€72.60*

10654 FG Alloy engine mount - 1 pce.

€14.60*

10655 Spur gear 38 teeth

Genuine FG spare/option part.Contents:1 piece

€76.90*

10656 FG Intermediate shaft for spur gear 38T

Genuine FG spare/option part.Contents:1 piece

€17.40*

10657 FG Spacer bushing 11x8x6

Genuine Fg spare/option part.Contents:2 pieces

€5.40*

10658 FG Spacer shim 11x8x1 mm

Genuine FG spare/option part. Part is delivered in silver or black color from vendor!Contents:2 pieces

€4.30*

Customers also viewed

10008 FG Formula 1 Competition 1/5

This model is fitted with numerous aluminium parts: front and rear side bulkheads, rockers, engine mount, suspension arm ends...Steel made Uniball sockets all possible enable all adjustments of the front and rear suspensions.The transmission made with a gearwheell drive offers outstanding reliability and smooth operation.Just like all other FG Competition models the FG Formula 1 Competition is the most successful model of the past years. The experiences we gained from numerous competitions have all influenced this version. The FG gearwheel drive which is extremely smooth running and cares for more power reserves. Surely FG Modellsport has created a competitive model for the next years with this version which will seamlessly follow up on the past successes. Highlights Alloy wishbones FG gearwheel drive Alloy rear axle plate FG alloy shock absorbers 04 Ball-bearing alloy servo saver 26 ccm Zenoah-Engine Airbox Tuned pipe Front- and rear brake 5 mm Chassis Lexan body shell Technical description of the FG Formula 1 Competition ki:The undercarriage of the FG Formula 1 Competition is built on an 5mm alloy chassis. All screws at the bottom of the chassis are countersunk.Front and rear axle mounts as well as the engine unit are connected over the complete length of the chassis, therefore we achieved almost the stiffness of a monocoque chassis. The quick fix system of the engine makes a fast changing of the engine possible. The drive to the rear axle is carried out over several easy-running front gearwheels and an FG ball drive at the rear axle. A separate flange bearing holds the clutch bell in order to relieve the crankshaft. Front and rear axle with their various adjusting possibilities as king pin angle, castor a.s.o. consist of alloy delta wishbones below. Solid alloy rear axle plates reduce the wear at the rear axle and give an enormous driving stability. 4 oil-pressure shock absorbers controlled by a pushrod suspension as well as stabilizers guarantee an optimal ground contact.We deliver the chassis selectively with tuning bowden cable brakes for front or respectively rear axle. The model is powered by a high-capacity 26 cm³ engine with airbox and Tuning pipe.Equipment of the FG Formula 1 Competition kitCNC-cut 5mm alloy chassis with lateral carbon fiber inserts, 26 cm³ engine, inlet silencer, Tuning pipe, FG gearwheel drive, ball drive, complete rear and front axle carrier unit with integrated engine quick-fixing device, double alloy wishbone fastenings, lower alloy delta wishbones at front and rear axle, front and rear alloy uprights, ball-bearing servo saver, steering stops, pushrods, 4 oil-pressure shock absorbers with alloy damper pistons, mechanical Tuning brakes at front and rear, stabilizer for front and rear axle, 10mm alloy balls, rear spoiler, polycarbonate body shell, polyamide front spoiler, receiver box, competition tires with tire inserts.We deliver the models as a kit including mounting instruction. The body parts are made of clear polycarbonate for your own painting. FG stickers and writings are enclosed.For the final assembly of the models you need further: radio control system (transmitter, receiver), 1 large steering servos (each approx. 40 - 50 kg), 2 servo for throttle brake (approx. 20 - 30 kg), batteries and charger.These parts are not included and must be supplied or ordered separately when the rc installation option is selected! Includet Zenoah 26cc engine Clear bodyshell and polycarbonate spoiler Mechanical brakesDimensions Length: 960mm Width: 440mm Height: 230mm Wheelbase: 620mm Formular 1 models in action!

€2,499.95*

Configure now

y1532/03 ZTW Beast Pro 200A ESC and 1090KV Brushless Motor

Genuine Top Tuning spare/option part. The set includes ZTW Beast Pro 200A ESC and 1090KV Brushless Motor.y1567 ZTW Beast Pro 200A ESC:Specification:Conzinous current: 200ABurst current: 1300ABEC: 6,0 V/7,4 V adjustable / 8 ABattery NIXX / LiPo: 8 - 24NC / 6-8S LiPoWidth: 55 mmLength: 90 mmHeight: 50 mmWeight: 407gProgrammable: JaWaterproof: JaSuitable Car: 1/5 Buggy/TruggySuitable car weight: 13kgTT5692 Top Tuning Brushless Motor 1090 kV: Specifications Max. amps: 195 A Max. voltage: 29 V Max. power: 5,200 W KV (RPM/Volt): 1090 KV Mounting hole depth: 8 mm Bolt pattern: 4 x M4 at 30 mm pitch circle diameter Case diameter: 57.8 mm Case length: 92 mm Free shaft length: 30 mm Shaft diameter: 8 mm Weight: 980 g Connector: 6.5 mm diameter Cable size: 8AWG Features High quality bearings 4Pole rotor with high quality magnets Stator - super thin silicon steel layers Super strength 8 mm shaft CNC Aluminium heatsink case Copper wires with high temperature endurance

€429.00* €469.90* (8.7% saved)

FG Raceline 2WD-530 with BMW M3 ALMS body shell

The new Raceline FF 530 is a very powerful competition model at an affordable price.In some countries a new competition category has been established so that as many RC car drivers as possible can enter the competition cheaply.RACELINE FF 2WD 530 Especially for competition use!Features:Front upper POM* a-armsfront/rear lower POM* a-armsPOM front axle bracketPOM shock mounts front and rear5 mm chassis platedual large diameter disk brakealuminum differentialNew rear braceDrive optimizationFront and rear aluminum spindles/uprightsAdjustable aluminum servo saverAluminum gear plateAluminum spur gear carrierLarge-volume tuned pipe systemHomologated and large volume airbox and tuned pipe systemOne advantage of POM* is its high dimensional stability. That means that it hardly changes its shape. The polymer has very good sliding and wear properties. The plastic has high strength and rigidity as well as medium to high impact strength and hardness. Its advantages also include high resilience. A very low center of gravity of the vehicle ensures good driving behavior on the track, the servos are installed lying down to support this behavior.*Polyoxymethylene (POM for short) are high molecular weight thermoplastics. The colorless, partially crystalline polymers are mainly used for the production of molded parts by injection molding.Content:1 piece

From €1,949.95*

Configure now

10321 FG Alloy front chassis for F1 Competition

Genuine FG spare/option part.Contents:1 piece

€64.90*

10363 FG Rear pushrod lever, ball raced for F1 Competition

Genuine FG spare/option part. Rear pushrod lever system for FG F1 Competition chassis. Ball raced damper levers with M5 mounting bolts. Increased shock piston travel.The set includes all parts necessary for the conversion.Contents:1 set

€143.95*

10640 FG Alloy rear bulkhead l/h F1 Comp. - 1 pce

Spare part for F1 gear drive

€106.50*

8522 FG Front shock absorber set short - 2pcs.

Shock absorber conversion kit for all 1:5 and 1:6 Ecoline models. Bulk oil-pressure shock absorber, experienced for years. Mounting hole distance: 113 mmTravel: 26 mmDiameter: 20 mmThe set contains 2 shock absorber with spring plate and spacer rings.

€51.90*