10651 FG Spacer bushing 13 x 10 x 35 mm

€3.00*

Prices incl. VAT plus shipping costs

Available

Product number: fg_10651

EAN: 3410564527696

Product information "10651 FG Spacer bushing 13 x 10 x 35 mm"

Genuine FG spare/option part.

Dimensions:

13 x 10 x 35 mm

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Similar products

10661, FG Turnbuckles, M6 x 50

Genuine FG spare/option part.Contents:2 pieces

€15.90*

10666 FG inlet silencer for F1 + Evo 08, set

Genuine FG spare/option part.The inlet silencer developed especially for the Formula 1 models to fit the CY / Zenoah G230/240/260/270 engines. The standard version of this air filter is equipped with a foam filter insert. Standard equipment of the F1 Competition. For a higher dust arising the special conical filter insert should be mounted.

€71.50*

10644 FG Alloy wishbone mounts M4

Genuine FG spare/option part. Solid alloy wishbone mounts with M4 thread for the FG Formula 1 Sportsline and Competition models. Six pieces per car are required. Contents:2 pieces

€35.10*

10656 FG Intermediate shaft for spur gear 38T

Genuine FG spare/option part.Contents:1 piece

€17.40*

10654 FG Alloy engine mount - 1 pce.

€14.60*

10655 Spur gear 38 teeth

Genuine FG spare/option part.Contents:1 piece

€76.90*

10652 FG Layshaft for Gear drive - 1 pcs

Diameter 10 mmLength 84.4 mm

€50.50*

10631, FG F1 rear lower alloy wishbone 09, 1 pce.

Milled in high-strength aluminium, suitable for the Formula 1 models Competition and Sportsline.

€98.95*

10632, FG F1 front lower alloy wishbone 09

Genuine FG spare/option part.Milled in high-strength aluminium, suitable for the Formula 1 models Competition and Sportsline.Contents:1 piece

€98.95*

10631/20, FG F1 rear lower alloy wishbone 09 with rose joints, 1 pce.

Milled in high-strength aluminium, suitable for the Formula 1 models Competition and Sportsline.Complete with installation set with three top quality rose joints and six conical spacers, a value of 30.75 EUR.

€107.00*

10643 FG Alloy differential bearing carrier, r/h - 1 pce

Spare part for F1 gear drive

€39.90*

10641 FG Alloy rear bulkhead r/h F1 Comp. - 1 pce

Spare part for F1 gear drive

€106.50*

Customers also viewed

10645 FG Alloy rear brace

Genuine FG spare/option part. For cars with gear drive FG no.: 10639. Contents:1 piece

€3.60*

FG Monster Truck WB535 HT-Edition

The Wheelbase of the WB535 2WD version is 60 mm longer. This modification improved the directionally stability as well as further driving qualities significantly. In addition parts of the 4WD Monster models were assembled in order to make a conversion to a 4WD model possible with low efforts. According to the large tires this model can be driven almost everywhere. The 26 cm³ Zenoah engine provides sufficient power. Driving fun as well as tremendous looks are the prime characteristics of these models.The body shell comes unpainted, a decal set with writings for further decoration is enclosed in the delivery.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Technical description:The undercarriage of the Monster models is built on a 4 mm angled alloy plate. All borings for fixa- tion of the chassis parts at the bottom side are countersunk in order to prevent the screw heads from sticking out. At the front axle you have the possibility to adjust toe-in or toe-out as well as the wheel camber through track rods with right-hand/left-hand thread. The wheel camber of the rear wheels can be adjusted individually through adjusting screws with right-hand/left-hand thread. Four large-volume oil-pressure shock absorbers are mounted at the lower double wishbones of front and rear axle, these are able to absorb larger shocks of jumps to a great extent and care for an optimal road grip. All rotating drive components are supported by ball bearings. Highly stressed steel parts such as rear gearwheels, differential gears and drive components are hardened. Fuel tank and ra- dio control parts are protected through alloy plates at the sides. The body parts are made of coloured or respectively clear polycarbonate. The Monster tires with tire inserts are glued on chrome-plated rims.The models are equipped with a powerful 26 cm³ combustion engine with ready-for-use oiled air fil- ter. The engine runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURAlloy spur gear carrierUse for 48T - 46 teeth spur gears.Value: 39,90 EURBall bearing set, sealed, set of 15The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 217,30 EURThe pictures may display the car with some optional items which are not included, like bed-mounted rollbar, lights, front bumper or mirrors. These items can be added in the drop down menus.The RTR version is delivered with assembled and preset radio control system and rechargeable batteries. To complete the non-RTR version all popular servos and radio control sys- tems are suitable.Dimensions: Length: 780 mm Width: 510 mm Height: 350 mm Wheelbase: 353 mm

€1,179.90*

Configure now

66236/01 FG Upper part belt channel, 530/535, 1pce.

Item N° 66236/01 Upper part belt channel, for Leopard 4WD 530, Offroad 4WD 535 and Sportline TW 4WD 535, 1pce.

€16.50*