10660/01, FG Alloy rear axle plate

Roadies Formular 1 tire chart from the current series divided into 3 categories 1) Parking lot / hobbyThe durability of the tire is the main focus here.2) Race track / hobbyHere you will find the tire that offers a compromise of durability and performance.3) Race track / competitionHere the racer will find the tires for best lap times on a race track and to win races.Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!Please note: The Roadies tires come on white rims!The ROADIES Tyre is a new development based on our successful experiences of the last couple of years. The complete four Tyre set weights about 1320g and the reduced diameter eliminates rotating mass at the outer edge of the tyre which is more effective than saving weight closer to the rotating axle, plus the tyres`lower profile make steering more precise especially through fast chicanes.
After winning the 2012 European Championship we can promise you a winning capable Tyre for 2013 without having to change it throughout the season.The PRO Tyre family makes use of our well proven European Championship winning rubber. This tyre works fine from 0° to 40° Celsius on dry tracks. It especially works best in medium to good grip conditions.The OPTION Tyres` Family development started in June 2012 and is now market ready. It works best in a temperature range of 0° to 40° Celsius and shows its strength in poor grip conditions and dusty tracks. This Tyre is an ideal addition to the PRO compound and offers superior traction and safety. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.!! Attention, please take the following advice !!
- adjust rear camber to a maximum of 2.5° to reach maximum performance and gain tyre`lifetime
- pierce a small hole in the surface of the tyre to allowe it to breathe while heating up and cooling down. This is an essential point and it is very important to not only drill holes into the rims as the inserts are glued to the rims and as a result the tyre can only breathe through wholes in its own surface. So holes in both tyre surface and the underneath of the rim please. Do not worry about any damage to the tyre due to the holes. We have designed it to cope with this.

Genuine FG spare/option part. Solid steel ball-and-socket joints with 4mm boring in the steel ball and M7 right handed thread. Clearance- and maintenance-free. Useable for the F1 front and rear axle instead of the plastic ball-and-socket joints 10mm 10027 and 10027/07.For mounting the wishbone thread rods M7 and hexagon nuts M7 with right-handed thread 10437, 10437/01 are necessary. Dimensions:A = 4 mmB = M7C = 14.5 mmD = 16.5 mmE = 45.7 mmContents:2 pieces

Genuine FG spare/option part. Alloy ball-and-socket joints with surface coating, 70% less weight.Contents:10x 7475/014x 7475/022x 7475/032x 7475/04