10066 FG Brake square 18mm - 2pcs.

€16.70*

Prices incl. VAT plus shipping costs

Available

Product number: fg_10066

EAN: 3410564525531

Product information "10066 FG Brake square 18mm - 2pcs."

Fits formula 1 cars only.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

10061 FG Toothed belt 150x16mm - 1pce.

Fits formula 1 cars only.

€27.90*

10035/01 FG Upper wishbone F1 for M7

Genuine FG spare/option part. Plastic wishbone with 6mm boring suitable for the reinforced wishbone threaded rods M6.Contents:2 pieces

€17.50*

10048 FG Clutch gilmer belt pulley 16 teeth

Genuine FG spare/option part. Fits formula 1 cars only.Contents:1 piece

€27.90*

10045 FG Rear Upright left/right - 2pcs.

€17.90*

10079 FG Damper spring set for F1 - 8pcs.

The set contains damper springs in four different hardnesses for the front and rear axle. Suitable for and .

€33.80*

10076 FG Clutch ball bearing 8x16x6mm F1 - 2pcs.

Suitable for FG Formel 1 models and other makes.

€13.80*

10055 FG Layshaft gilmer belt pulley 18 teeth - 1pce.

Fits formula 1 cars only.

€27.90*

10056 FG Main gilmer belt pulley 48 teeth - 1pce.

Fits formula 1 cars only.

€44.90*

10106 FG Front rim for F1 white - 2pcs.

Detailed Formula 1 BBS-race rim in white.Width: 60mmRim with 18 mm square drive

€19.90*

This product is no longer available.

10064 FG Belt tensioner - 2pcs.

Fits formula 1 cars only.

€11.90*

10060 FG Gilmer belt 150x20mm

Genuine FG spare/option part.Fits formula 1 cars only.Contents:1 piece

€27.90*

This product is currently not available.

10071 FG Clutch carrier for Solo - 1pce.

Fits formula 1 cars only.

€25.50*

Customers also viewed

32742 Wheel/brake disk drive

Genuine Smartech spare/option part.Content:2 pieces

€19.99*

y6107/02 Wheel squares 18 mm HART-COAT, 17 mm wide

Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)17 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 17 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€18.95*

10014 FG Body mounts front - 2pcs.

Suitable for the Formula 1.

€3.90*

67340 FG Aluminium brake square, 1 pcs.

Genuine FG spare/option part.Replacement part for: 67360 Conversion kit for gear brake Leopard

€8.80*

GH98H GRP off-road disc rim for 132/180mm tires, 24 mm hex for Losi, HPI + Co.

Genuine GRP spare/option part.GRP off-road disc rim for tires with approx, 132 mm inner diameter, 24 mm hex wheel drive for Losi, HPI + Co.The closed disc rim features reinforcement ribs on the backside and a protective collar around the wheel nut seat.Dimensions:for tires with an inner diameter of approx. 132 mm and approx. 70 mm widthand an outer diameter of approx. 180 mm (like i.e. GRP / Gandini tires)Weight approx. 172 grammsContents:2 pieces

€16.90*

TT1051 Top Tuning Conversion kit for the standard 1:/5 18 mm square wheel drives for the Carson CY-Eline cars

Genuine Top Tuning spare/option part. Conversion kit for the standard 1:/5 18 mm square wheel drives for the Carson CY-Eline carsThis allows for the use of all 1/5 on-road wheels e.g. by or . The cars become approx. 5 mm wider per side. This i feasibles with all usual body shells of the CY-E-line cars. Set includes:4 pieces # y6107 hard coated 18 mm aluminum square drives, 9.5 mm wide, with 8 mm axle bore, threaded for 2 x M6 grub screws4 pieces M6 grub screws8 pieces 3x16 mm steel pins4 pieces # 6038 mounting washers 6x15 mm 4 pieces M5x16 mm countersunk screws

€39.90*